Development of a Temperature-Graded Tailored Forming Process for Hybrid Axial Bearing Washers

verfasst von: J. Peddinghaus, Y. Faqiri, T. Hassel, J. Uhe, B. A. Behrens
Abstract: The Tailored Forming process developed in the presented research enables the production of axial bearing washers with AISI 1022M (C22.8/1.0460) base material and AISI 52100 (100Cr6/1.3505) cladding on the rolling contact surface. By limiting the use of the bearing steel to the highly loaded surface, significant amounts of alloyed steel can be saved. The cladding is applied through plasma transferred arc (PTA) welding and subsequently formed to improve its properties. The challenge in developing a hot upsetting process lies in the high difference in flow stress of the two materials, since the harder bearing steel is merely pressed into the softer base without sufficient deformation. In order to equalise the flow stress of both materials, an adapted temperature gradient is induced over the washer height before upsetting. Due to this, a higher cladding temperature is set while the base material remains significantly cooler. This is realised by means of local inductive heating of the cladding and different transfer times to the upsetting process. The process variants are applied in an automated forging cell and subsequently evaluated in metallographic analysis of cross sections after welding and after forming. The results show the most favourable material properties after forming when local inductive heating of the cladding is simultaneously combined with cooling of the base material and the transfer time between the heating stage and forming is minimized.
Organisationseinheit(en): Institut für Umformtechnik und Umformmaschinen
Institut für Werkstoffkunde
Typ: Beitrag in Buch/Sammelwerk
Seiten: 3-12
Anzahl der Seiten: 10
Publikationsdatum: 02.02.2023
Publikationsstatus: Veröffentlicht
Peer-reviewed: Ja
ASJC Scopus Sachgebiete: Wirtschaftsingenieurwesen und Fertigungstechnik, Volkswirtschaftslehre, Ökonometrie und Finanzen (sonstige), Sicherheit, Risiko, Zuverlässigkeit und Qualität
Elektronische Version(en): https://doi.org/10.1007/978-3-031-18318-8_1 (Zugang: Geschlossen)
: Details im Forschungsportal „Research@Leibniz University“

BibTeX

@inbook{51a57cf835db4d3eb66bc2192a87e88a,
title = "Development of a Temperature-Graded Tailored Forming Process for Hybrid Axial Bearing Washers",
abstract = "The Tailored Forming process developed in the presented research enables the production of axial bearing washers with AISI 1022M (C22.8/1.0460) base material and AISI 52100 (100Cr6/1.3505) cladding on the rolling contact surface. By limiting the use of the bearing steel to the highly loaded surface, significant amounts of alloyed steel can be saved. The cladding is applied through plasma transferred arc (PTA) welding and subsequently formed to improve its properties. The challenge in developing a hot upsetting process lies in the high difference in flow stress of the two materials, since the harder bearing steel is merely pressed into the softer base without sufficient deformation. In order to equalise the flow stress of both materials, an adapted temperature gradient is induced over the washer height before upsetting. Due to this, a higher cladding temperature is set while the base material remains significantly cooler. This is realised by means of local inductive heating of the cladding and different transfer times to the upsetting process. The process variants are applied in an automated forging cell and subsequently evaluated in metallographic analysis of cross sections after welding and after forming. The results show the most favourable material properties after forming when local inductive heating of the cladding is simultaneously combined with cooling of the base material and the transfer time between the heating stage and forming is minimized.",
keywords = "Inductive heating, Plasma transferred arc welding, Tailored forming, Upsetting",
author = "J. Peddinghaus and Y. Faqiri and T. Hassel and J. Uhe and Behrens, {B. A.}",
note = "Funding Information: Acknowledgments. The research results presented in this paper were obtained within the Collaborative Research Centre 1153 “Process chain to produce hybrid high performance components by tailored forming”—252662854 in the subprojects B2, A4 and T1. The authors thank the subproject A2 for supplying the heat treatment of the hybrid components, subproject C1 for providing the material data and the German Research Foundation (DFG) for the financial support of this project.",
year = "2023",
month = feb,
day = "2",
doi = "10.1007/978-3-031-18318-8_1",
language = "English",
isbn = "978-3-031-18317-1",
series = "Lecture Notes in Production Engineering",
publisher = "Springer Nature",
pages = "3--12",
booktitle = "Lecture Notes in Production Engineering",
address = "United States",
}