Publikationen des Instituts für Umformtechnik und Umformmaschinen

Behrens, B.-A.; Brunotte, K.; Peddinghaus, J.; Ursinus, J.; Döring, S.; Maus-Friedrichs, W.; Gustus, R.; Szafarska, M. (2023): Pressing and Sintering of Titanium Aluminide Powder after Ball Milling in Silane-Doped Atmosphere
DOI: 10.3390/jmmp7050171

Middendorf, P; Rothgänger, M.; Peddinghaus, J.; Brunotte, K.; Uhe, J.; Behrens, B.A.; Quentin, L.; Kästner, M.; Reithmeier, E. (2023): In Situ Wear Measurement of Hot Forging Dies Using Robot Aided Endoscopic Fringe Projection
DOI: 10.4028/p-k81788
ISBN: 1662-9795

Stockburger, E.; Wester, H.; Behrens, B.-A. (2023): Failure Modelling of CP800 Using Acoustic Emission Analysis
DOI: 10.3390/app13064067

Stockburger, E.; Wester, H.; Behrens, B.-A. (2023): Fracture Characterisation and Modelling of AHSS Using Acoustic Emission Analysis for Deep Drawing
DOI: 10.3390/jmmp7040127

Stockburger, E.; Zhang; W., Wester, H.; Rosenbusch, D.; Behrens, B.-A. (2023): Process analyses of friction drilling using the Smoothed Particle Galerkin method
DOI: 10.1007/s12289-022-01733-0

Behrens, B.-A., Brunotte, K., Peddinghaus, J., Heymann, A. (2022) (2022): Influence of Dwell Time and Pressure on SPS Process with Titanium Aluminides, Metals 2022,  Vol. 12, Issue 1, 04. Januar 2022
DOI: https://doi.org/10.3390/met12010083

Behrens, B.-A.; Brunotte, K.; Wester, H.; Lorenz, U.; Müller, F. (2022): Hardness Assessment Considering Nitrided Layers Based on Tempering Tests for Numerical Wear Prediction for Forging Processes
DOI: 10.3390/ma15207105

Behrens, B.-A.; Hübner, S.; Yarcu, S. (2022): Wasserbasierte Schmierstoffe – Eine Alternative für die Blechumformung?
DOI: 10.48811/phi-22-022

Behrens, B.-A.; Huskic, A.; Rosenbusch, D.; Peddinghaus, J.; Wester, H.; Siegmund, M.; Giedenbacher, J.; Siring, J. (2022) (2022): Design, Characterisation and Numerical Investigations of Additively Manufactured H10 Hybrid-Forging Dies with Conformal Cooling Channels, Metals 2022,  Vol. 12, Issue 7, 21. Juni 2022
DOI: https://doi.org/10.3390/met12071063

Behrens, B.-A.; Krimm, R.; Koß, J.; Höber, A. (2022): Bauteilbezogene Speicherung prozessrelevanter Daten - Eine flexible Nachrüstlösung zur Prozessdatenakquise,  Zeitschrift für wirtschaftlichen Fabrikbetrieb (ZWF), Jahrgang 117, Heft 1/2-2022, S.66-70, De Gruyter Verlag, Berlin.
DOI: 10.1515/zwf-2022-1011

Behrens, B.-A.; Rosenbusch, D.; Wester, H.; Siring, J. (2022) (2022): Numerical Investigations on Stresses and Temperature Development of Tool Dies during Hot Forging, Key Engineering Materials,  22. Juli 2022, Vol. 926, S.559-568
DOI: https://doi.org/10.4028/p-sf68jl

Behrens, B.-A.; Uhe J.; Ross, I.; Peddinghaus, J.; Ursinus, J.; Matthias, T.; Bährisch, S. (2022) (2022): Tailored Forming of hybrid bulk metal components, International Journal of Material Forming,  27. April 2022
DOI: https://doi.org/10.1007/s12289-022-01681-9

Coors, T.; Faqiri, M. Y.; Saure, F.; Kahra, C.; Büdenbender, C.; Peddinghaus, J.; Prasanthan, V.; Pape, F.; Hassel, T.; Herbst, S.; Nürnberger, F.; Wester, H.; Uhe, J.; Breidenstein, B.; Denkena, B.; Behrens, B.-A.; Poll, G.; Maier, H. J. (2022): Investigations on Additively Manufactured Stainless Bearings
DOI: 10.3390/coatings12111699

Dröder, K.; Hürkamp, A.; Droß, M.; Behrens, B.-A.; Wester, H.; Stockburger, E. (2022): Formschlüssige In-Mould-Verbindung zwischen FVK und einem mit Fließlochhülsen strukturierten Blecheinleger,  EFB-Forschungsbericht Nr. 582, Hannover, S. 136.
DOI: https://www.efb.de/efb-forschungsbericht-nr-582.html
ISBN: 978-3-86776-640-1

Fricke, L. V.; Thürer, S. E.; Kahra, C.; Bährisch S.; Herbst S.; Nürnberger F.; Behrens, B.-A.; Maier, H. J.; Klose, C.; Barton, S.: .; Public, J. (2022): Non-destructive evaluation of the workpiece properties along the hybrid-bearing bushing process chain
DOI: 10.1007/s11665-022-07598-3

Konopka D.; Pape F.; Heimes N.; Behrens B.-A.; Möhwald K.; Poll G. (2022): Functionality Investigations of Dry-Lubricated Molybdenum Trioxide Cylindrical Roller Thrust Bearings, Coatings MDPI 2022,  Vol. 12, Issue 15
DOI: https://doi.org/10.3390/coatings12050591

Lachmayer, R.; Behrens, B.-A.; Ehlers, T.; Müller, P.; Althaus, P.; Oel, M.; Farahmand, E.; Gembarski, P. C.; Wester, H.; Huebner, S. (2022): Process-Integrated Lubrication in Sheet Metal Forming
DOI: 10.3390/jmmp6050121

Liewald, M.; Bergs, T.; Groche, P.; Behrens, B.-A.; Briesenick, D.; Müller, M.; Niemietz, P.; Kubik, C.; Müller, F. (2022): Perspectives on data-driven models and its potentials in metal forming and blanking technologies
DOI: 10.1007/s11740-022-01115-0

Piwek, A.; Uhe, J.; Peddinghaus, J.; Brunotte, K. (2022): Tailored Forming: Drucküberlagertes Warmfließpressen
DOI: https://e-paper.vdi-fachmedien.de/werkstattstechnik/2022#03-10-2022

Thürer, S. E.; Peters, K.; Heidenblut, T.; Heimes, N.; Peddinghaus, J.; Nürnberger, F.; Behrens, B.-A.; Maier, H. J.; Klose, C. (2022): Characterization of the Interface between Aluminum and Iron in Co-Extruded Semi-Finished Products, Materials 2022,  Vol. 15, Issue 5, 24. Februar, 2022, S.1692
DOI: https://doi.org/10.3390/ma15051692

Thürer, S.E.;Peters, K.;Heidenblut, T.; Heimes, N.; Peddinghaus, j.;Nürnberger, F.;Behrens, B.-A.;Maier, H.J.and Klose, C. (2022): Characterization of the Interface between Aluminum and Iron in Co-Extruded Semi-Finished Products,  Materials 15
DOI: 10.3390/ma15051692

Aldakheel, F.; Behrens, B.-A.; Böhm, C.; Chugreeva, A.; Ince, C.-V.; Raatz, A.; Uhe, J.; Wriggers, P.; (2021): A design concept of active cooling for tailored forming workpieces during induction heating,  Prod. Eng. Res. Devel. 15, 177–186
DOI: 10.1007/s11740-021-01027-5

B.-A. Behrens, J. Schröder, H. Wester, D. Brands, S. Uebing und C. Kock (2021): Experimental and numerical investigations on the development and stability of residual stresses arising from hot forming processes,  13th International Conference on Technology of Plasticity (ICTP)

Behrens, B.-A., Brunotte, K., Wester, H., Kock, C. (2021): Targeted adjustment of residual stresses in hot-formed components by means of process design based on finite element simulation,  Arch Appl Mech
DOI: 10.1007/s00419-021-01928-y

Behrens, B.-A., Maier, H. J., Poll, G., Overmeyer, L., Wester, H., Uhe, J., Hassel, T.; Pape, F.; Lammers, M.; Hermsdorf, J.; Kaierle, S.; Budde, L.; Saure, F.; Mildebrath, M.; Coors, T.; Faqiri, M. Y.; Büdenbender, C. (2021): Influence of degree of deformation on welding pore reduction in high-carbon steels,  Production Engineering
DOI: 10.1007/s11740-020-01009-z

Behrens, B.-A., Schröder, J., Brands, D., Brunotte, K., Wester, H., Scheunemann, L., Uebing, S., Kock, C. (2021): Numerische Prozessauslegung zur gezielten Eigenspannungseinstellung in warmmassivumgeformten Bauteilen unter Berücksichtigung von Makro- und Mikroskala,  Forschung im Ingenieurwesen
DOI: 10.1007/s10010-021-00482-x

Behrens, B.-A., Uhe, J. (2021): Introduction to tailored forming,  Production Engineering
DOI: 10.1007/s11740-021-01022-w

Behrens, B.-A.; , Rosenbusch, D.; Wester, H.; and Stockburger, E. (2021): Material Characterization and Modeling for Finite Element Simulation of Press Hardening with AISI 420C,  Journal of Materials Engineering and Performance
DOI: 10.1007/s11665-021-06216-y

Behrens, B.-A.; Brunotte, K.; Hübner, S.; Wester, H.; Müller, F.; Müller, P.; Wälder, J.; Matthias, T. (2021): Development of Wear Calculation and Wear Reduction in Cold Forging Processes.,  J. Manuf. Mater. Process. 2021, 5, 36
DOI: 10.3390/jmmp5020036

Behrens, B.-A.; Brunotte, K.; Petersen, T.; Ostermeyer, C.; Till, M. (2021): Adjusting mechanical properties of forging dies produced by ausforming,  24th International Conference on Material Forming, ESAFORM 2021, 02.04.2021, Liège, Belgium,
DOI: 10.25518/esaform21.2697

Behrens, B.-A.; Brunotte, K.; Petersen, T.; Relge, R. (2021): Investigation on the Microstructure of ECAP-Processed Iron-Aluminium Alloys
DOI: 10.3390/ma14010219

Behrens, B.-A.; Brunotte, K.; Wester, H.; Dykiert, M. (2021): Fracture Characterisation by Butterfly-Tests and Damage Modelling of Advanced High Strength Steels,  Key Engineering Materials, Volume 883, 2021, S. 294-302
DOI: 10.4028/www.scientific.net/KEM.883.294.

Behrens, B.-A.; Brunotte, K.; Wester, H.; Rothgänger, M.; Müller, F. (2021): Multi-Layer Wear and Tool Life Calculation for Forging Applications Considering Dynamical Hardness Modeling and Nitrided Layer Degradation,  Materials 2021, Vol. 14, Issue 11, 05. Januar 2021
DOI: 10.3390/ma14010104

Behrens, B.-A.; Chugreeva, A.; Heimes, N.; Klose, C.; Maier, H.J.; Thürer, S.E.; Uhe, J. (2021): Process chain for the manufacture of hybrid bearing bushings,  Prod. Eng. Res. Devel. 15, 137–150 (2021)
DOI: 10.1007/s11740-021-01028-4

Behrens, B.-A.; Dröder, K.; Hürkamp, A.; Droß, M.; Wester, H.; Stockburger, E. (2021): Finite Element and Finite Volume Modelling of Friction Drilling HSLA Steel under Experimental Comparison,  Materials, Ausgabe 14 (20), S. 1-17.
DOI: 10.3390/ma14205997

Behrens, B.-A.; Gibmeier, J.; Brunotte, K.; Wester, H.; Simon, N.; Kock, C. (2021): Investigations on Residual Stresses within Hot-Bulk-Formed Components Using Process Simulation and the Contour Method,  Metals 2021
DOI: 10.3390/met11040566

Behrens, B.-A.; Poll, G.; Möhwald, K.; Schöler, S.; Pape, F.; Konopka, D.; Brunotte, K.; Wester, H.; Richter, S.; Heimes, N.; (2021): Characterization and Modeling of Nano Wear for Molybdenum-Based Lubrication Layer Systems,  Nanomaterials 2021, 11, 1363
DOI: 10.3390/nano11061363

Behrens, B.-A.; Rosenbusch, D.; Wester, H.; Dykiert, M. (2021): Comparison of different testing approaches to describe the fracture behaviour of AHSS sheets using experimental and numerical investigations,  IOP Conference Series: Materials Science and Engineering, Volume 1157, International Deep-Drawing Research Group Conference (IDDRG 2021) 21st June - 2nd July 2021, Stuttgart, Germany
DOI: 10.1088/1757-899X/1157/1/012059

Behrens, B.-A.; Uhe, J.; Petersen, T.; Klose, C.; Thürer, S. E.; Diefenbach, J.; Chugreeva, A. (2021): Challenges in the Forging of Steel-Aluminum Bearing Bushings,  Materials, 14(4), S. 803.
DOI: 10.3390/ma14040803

Behrens, B.-A.; Uhe, J.; Petersen, T.; Nürnberger, F.; Kahra, C.; Ross, I.; Laeger, R. (2021): Contact Geometry Modification of Friction-Welded Semi-Finished Products to Improve the Bonding of Hybrid Components,  Metals 2021, Vol. 11, Issue 1, 08. Januar 2021
DOI: 10.3390/met11010115

Behrens, B.-A.; Ursinus, J.; Duran, D.; Matthias, T. (2021): Impact extrusion with pressure superimposition,  WT Werkstattstechnik online
DOI: 10.37544/1436-4980-2021-10-17

Behrens, B.-A.; Ursinus, J.; Duran, D.; Uhe, J.; Matthias, T. (2021): Fließpressen mit Drucküberlagerung,  WT WerkstattsTechnik online 11/12, 2021
DOI: 10.37544/1436-4980-2021-10-1

Franceschi, A., Stahl, J., Kock, C., Selbmann, R., Ortmann-Ishkina, S., Jobst, A., Merklein, M., Kuhfuß, B., Bergmann, M., Behrens, B.-A., Volk, W., Groche, P. (2021): Strategies for residual stress adjustment in bulk metal forming,  Arch Appl Mech
DOI: 10.1007/s00419-021-01903-7

Müller, P.; Hübner, S.; Vogt, H.; Rosenbusch, D.; Behrens, B. (2021): Investigation of the Influence of a Superimposed Oscillated Forming Process on Forming Characteristics,  Key Engineering Materials Vol. 883

Scandola, L.; Büdenbender, C.; Till, M.; Maier, D.; Ott, M.; Behrens, B.-A.; Volk, W. (2021): Development of a numerical compensation framework for geometrical deviations in bulk metal forming exploiting a surrogate model and computed compatible stresses,  International Journal of Material Forming, 25. Februar 2021
DOI: 10.1007/s12289-020-01603-7

B.-A. Behrens, K. Brunotte, H. Wester und C. Kock (2020): Experimental investigations on the interactions between the process parameters of hot forming and the resulting residual stresses in the component,  Procedia Manufacturing, Nr. 50, pp. 706-712

Behrens, B. -A.; Diefenbach, J.; Chugreeva, A.; Kahra, C.; Herbst, S.; Nürnberger, F. (2020): Tailored Forming of Hybrid Bevel Gears with Integrated Heat Treatment,  Procedia Manufacturing, 47, S. 301-308.
DOI: 10.1016/j.promfg.2020.04.234

Behrens, B.-A., Brunotte, K., Wester, H., Müller, F. (2020): Practical Process Characterisation for Hot-Stamping regarding the heat transfer coefficient using a numerical and experimental coupled method,  29th International Conference on Metallurgy and Materials, Brno, Czech Republic, EU, May 20 - 22, 2020.
DOI: 10.37904/metal.2020.3522

Behrens, B.-A., Maier, H.J., Klose, C., Wester, H., Thürer, S.E., Heimes, N. and Uhe, J. (2020): Characterization and Modeling of Intermetallic Phase Formation during the Joining of Aluminum and Steel in Analogy to Co-Extrusion,  Metals 2020, 10(12), 1582
DOI: 10.3390/met10121582

Behrens, B.-A.: Duran, D.; Matthias, T.; Ross, I.; (2020): Enhancement of the interface of friction welded steel‑aluminium joints
DOI: 10.1007/s11740-020-00994-5

Behrens, B.-A.; Brunotte, K.; Özkaya, F.; Wohner, M.; Stockburger, E.; (2020): Extension of the Conventional Press Hardening Process by Local Material Influence to Improve Joining Ability,  Procedia Manufacturing, Volume 47, 2020, Pages 1345-1352.
DOI: 10.1016/j.promfg.2020.04.258

Behrens, B.-A.; Chugreeva, A.; Diefenbach, J.; Kahra, C.; Herbst, S.; Nürnberger, F.; Maier, H. J. (2020): Microstructural Evolution and Mechanical Properties of Hybrid Bevel Gears Manufactured by Tailored Forming,  Metals, 10(10), S. 1365.
DOI: 10.3390/met10101365

Behrens, B.-A.; Hübner, S.; Missal, N.; Vogt, H.; Rosenbusch, D.; Müller, P. (2020): Schwingungsüberlagertes Axialformen,  WT WerkstattsTechnik 11/12-2020, S.838-843

Behrens, B.-A.; Hübner, S.; Müller, P.; Besserer, H.-B.; Gerstein, G.; Koch, S.; Rosenbusch, D. (2020): New Multistage Sheet-Bulk Metal Forming Process Using Oscillating Tools,  Metals 2020, 10, 617

Behrens, B.-A.; Hübner, S.; Müller, P.; Missal, N.; Vogt, H. (2020): Superimposed Oscillation,  Sheet Bulk Metal Forming, (2020), pp. 515-534

Behrens, B.-A.; Hübner, S.; Rosenbusch, D.; Müller, P (2020): Investigations of the Influence of a Superimposed Oscillation on the Fatigue Strength,  Metals 2020, 10, 1274.

Behrens, B.-A.; Hübner, S.; Rosenbusch, D.; Müller, P. (2020): Dynamic Process Forces,  Sheet Bulk Metal Forming, (2020), pp. 102-126

Behrens, B.-A.; Krimm, R.; Höber, A.; (2020): Auslegung von Servopressenantrieben - Entwicklung eines modellbasierten Auslegungstools,  wt Werkstattstechnik online, 6-2020

Behrens, B.-A.; Maier, H.J.; Poll, G.; Wriggers, P.; Aldakheel, F.; Klose, C.; Nürnberger, F.; Pape, F.; Böhm, C.; Chugreeva, A.; Coors, T.; Duran, D.; Thürer, S.E.; Herbst, S.; Hwang, J.-I.; Matthias, T.; Heimes, N.; Uhe, J. (2020): Numerical investigations regarding a novel process chain for the production of a hybrid bearing bushing,  Prod. Eng. Res. Devel. 14, 569–581 (2020)
DOI: 10.1007/s11740-020-00992-7

Behrens, B.-A.; Matthias, T.; Hübner, S.; Müller, P.; Wester, H.; Wälder, J. (2020): Numerical Calculation of Tool Wear in Industrial Cold Forming Processes Using the Further Development of Wear Modelling,  Sheet Bulk Metal Forming, (2020), pp. 535-552

Behrens, B.-A.; Meijer, A.; Stangier, D.; Hübner, S.; Biermann, D.; Tillmann, W.; Rosenbusch, D.; Müller, P. (2020): Static and oscillation superimposed ring compression tests with structured and coated tools for Sheet-Bulk Metal Forming,  Journal of Manufacturing Processes, Volume 55, pp. 78-86

Behrens, B.-A.; Tillmann, W.; Biermann, D.; Hübner, S.; Stangier, D.; Freiburg, D.; Meijer, A.; Koch, S.; Rosenbusch, D.; Müller, P (2020): Influence of Tailored Surfaces and Superimposed-Oscillation on Sheet-Bulk Metal Forming Operations,  J. Manuf. Mater. Process. 2020, 4, 41

Behrens, B.-A.; Uhe, J.; Petersen, T.; Nürnberger, F.; Kahra, C.; Ross, I.; Laeger, R. (2020): Contact Geometry Modification of Friction-Welded Semi-Finished Products to Improve the Bonding of Hybrid Components,  Metals Special Issue, Springer Verlag 2020
DOI: 10.3390/met11010115

Behrens, B.-A.; Ursinus, J. (2020): Production, Bonding and Application of Metal Matrix Composite Hot Forging Tool Components,  Procedia Manufacturig Vol. 47
DOI: 10.1016/j.promfg.2020.04.268

Behrens, Bernd-Arno; Volk, Wolfram; Maier, Daniel; Scandola, Lorenzo; Ott, Michael; Kai, Brunotte; Büdenbender, Christoph; Till, Michael (2020): A Combined Numerical and Experimental Investigation on Deterministic Deviations in Hot Forging Processes,  Procedia Manufacturing (Volume 47), S. 295-300, 2020.
DOI: 10.1016/j.promfg.2020.04.231

Bergmann, B.; Witt, M. (2020): Feeling machine for material-specific machining,  CIRP Annals, Volume 69, Issue 1, 2020, Pages 353-356
DOI: 10.1016/j.cirp.2020.04.102

Coors, T.; Mildebrath, M.; Büdenbender, C.; Saure, F.; Faqiri, M. Y.; Kahra, C.; Prasanthan, V.; Chugreeva, A.; Matthias, T.; Budde, L.; Pape, F.; Nürnberger, F.; Hassel, T.; Hermsdorf, J.; Overmeyer, L.; Berndstein, B.; Denkena, B.; Behrens, B.-A.; Maier, H. J.; Poll, G. (2020): Investigations on Tailored Forming of AISI 52100 as Rolling Bearing Raceway,  Metals, 10(10), S. 1363.
DOI: 10.3390/met10101363

Demler, E.; Götze, S.; Herbst, S.; Nürnberger, F.; Maier, H. J.; Ursinus, J.; Büdenbender, C.; Behrens, B.-A. (2020): Casting Manufacturing of Cylindrical Preforms Made of Low Alloy Steels,  Procedia Manufacturing Vol. 47 (2020)
DOI: 10.1016/j.promfg.2020.04.333

Denkena, B.; Bergmann, B.; Witt, M. (2020): Feeling Machine for Process Monitoring of Turning Hybrid Solid Components,  Metals
DOI: 10.3390/met10070930

Hürkamp, A.; Dér, A.; Gellrich, S.; Ossowski, T.; Lorenz, R.; Behrens, B.-A.; Herrmann, C.; Dröder, K.; Thiede, S. (2020): Integrated computational product and production engineering for multi-material lightweight structures,  • The International Journal of Advanced Manufacturing Technology
DOI: 10.1007/s00170-020-05895-6

Müller, F.; Malik, I.; Wester, H.; Behrens, B.-A. (2020): Experimental Characterisation of Tool Hardness Evolution Under Consideration of Process Relevant Cyclic Thermal and Mechanical Loading During Industrial Forging,  In Production at the Leading Edge of Technology. Lecture Notes in Production Engineering. Springer: Berlin/Heidelberg, Germany, 2020; pp. 3–12.
DOI: 10.1007/978-3-662-62138-7_1

Schöler, S.; Schmieding, M.; Heimes, N.; Pape, F.; Behrens, B.-A.; Poll, G.; Möhwald, K. (2020): Characterization of Molybdenum Based Coatings on 100Cr6 Bearing Steel Surfaces,  Tribology Online 15, 2020 (3)
DOI: 10.2474/trol.15.181

Thürer, S.E.; Peddinghaus, J.; Heimes, N.; Bayram, F.C.; Bal, B.; Uhe, J.; Behrens, B.-A.; Maier, H.J.; Klose, C. (2020): Lateral Angular Co-Extrusion: Geometrical and Mechanical Properties of Compound Profiles,  Metals, 10, 1162
DOI: 10.3390/met10091162

Behrens B.-A., Chugreev A., Kock C. (2019): Macroscopic FE-simulation of residual stresses in thermo-mechanically processed steels considering phase transformation effects,  XIV International Conference on Computational Plasticity. Fundamentals and Applications, S.211-222

Behrens, B.-A.; Breidenstein, B; Duran, D.; Herbst, S.; Lachmayer, R.; Löhnert, S.; Matthias, T.; Mozgova, I.; Nürnberger, F.; Prasanthan, V.; Squeira, R.; Töller, F.; Wriggers, P. (2019): Simulation-Aided Process Chain Design for the Manufacturing of Hybrid Shafts,  HTM Journal of Heat Treatment and Materials, Vol. 74, Issue 2, April 2019, S.115-135
DOI: 10.3139/105.110378

Behrens, B.-A.; Chugreev, A. ; Kock, C.; Brunotte, K.; Matthias, T.; Wester, H. (2019): FE-simulation of rotary friction welding process considering thermomechanical-metallurgical coupling,  Proceedings of NUMIFORM 2019: The 13th International Conference on Numerical Methods in Industrial Forming Processes, S. 27-30.

Behrens, B.-A.; Chugreev, A.; Kazhai, M.; Yarcu, D.; Büdenbender, C.; Relge, R. (2019): Fabrication of piston pins made of a novel aluminium-alloyed UHC steel,  The International Journal of Advanced Manufacturing Technology, Springer Verlag
DOI: 10.1007/s00170-019-03473-z

Behrens, B.-A.; Dilger, K.; Lippky, K.; Kaempf, L.; Hübner, S.; Hartwig, S.; Altun, Y.; Garbriel, M.; Farahmand, E.; Micke-Camuz, M. (2019): Combined deep drawing and fusion bonding of structural FRP-metal hybrid parts,  Procedia Manufacturing, Vol. 29
DOI: 10.1016/j.promfg.2019.02.141

Behrens, B.-A.; Hübner S.; Wölki K. (2019): Acoustic emissions during tensile test of DC06 and HCT600X,  Materialwissenschaft und Werkstofftechnik, Vol. 50, S.796-809
DOI: 10.1002/mawe.201800092

Behrens, B.-A.; Hübner, S.; Yarcu, S.; Wölki, K.; Maier, H. J.; Golovko, O.; Nürnberger, F. (2019): Erzeugung duktiler Bereiche beim Formhärten,  wt-online, Ausgabe 10-2019 , S.750-754 Weitere Informationen

Behrens, B.-A.; Lorenz, R. (2019): Erweiterung der Modellierung der Wärmefreisetzungsrate für Stähle,  EFB-Forschungsbericht Nr. 521, Europäische Forschungsgesellschaft für Blechverarbeitung e.V., Hannover, 2019
ISBN: 978-3-86776-575-6

Behrens, B.-A.; Relge, R. (2019): Verbesserung der Duktilität durch Kornfeinung - Entwicklung eines isothermen ECAP-Werkzeugs zur Umformung von Eisen-Aluminium-Legierungen,  wt-online, Ausgabe 10-2019 , S.770-776 Weitere Informationen

Behrens, B.-A.; Schröder, J.; Brands, D.; Scheunemann, L.; Niekamp, R.; Chugreev, A.; Sarhil, M.; Uebing, S.; Kock, C. (2019): Experimental and numerical investigations on the development of residual stresses in thermo-mechanically processed Cr-alloyed steel 1.3505,  Metals 2019, Vol. 9, Issue 4, S.480
DOI: 10.3390/met9040480

Bernd-Arno Behrens; Alexander Chugreev; Tim Matthias; Gerhard Poll; Florian Pape; Timm Coors; Thomas Hassel; Hans Jürgen Maier; Maximilian Mildebrath (2019): Manufacturing and Evaluation of Multi-Material Axial-Bearing Washers by Tailored Forming,  Metals 2019, Volume 9, Issue 2, 232

Brands, D.; Chugreev, A.; Kock, C.; Niekamp, R.; Scheunemann, L.; Uebing, S.; Behrens, B.-A.; Schröder, J. (2019): Numerical analysis of residual stresses on microscale and mesoscale in hot bulk forming parts under specific cooling,  Proceedings in Applied Mathematics & Mechanics, 12. November 2019
DOI: 10.1002/pamm.201900017

Bruns, C.; Bohne, F.; Micke-Camuz, M.; Behrens, B.-A.; Raatz, A. (2019): Heated gripper concept to optimize heat transfer of fiber-reinforced-thermoplastics in automated thermoforming processes,  Procedia CIRP, Vol. 79, S.331-336
DOI: 10.1016/j.procir.2019.02.077

Graf, M.; Ullmann, M.; Korpala, G.; Wester, H.; Awiszus, B.; Kawalla, R.; Behrens, B.-A (2019): Forming and Oxidation Behavior During Forging with Consideration of Carbon Content of Steel,  Metals 2018, Vol. 8, S.996
DOI: 10.3390/met8120996

Hürkamp, A.; Lorenz, R.; Behrens, B.-A.; Dröder, K. (2019): Computational Manufacturing for Multi-Material Lightweight Parts,  CIRP 00 (2017) 000–000, Seiten 102-107
DOI: 10.1016/j.procir.2019.09.041

Maier, D.; Hartmann, C.; Till, M.; Büdenbender, C.; Behrens, B.-A.; Volk, W. (2019): Data-Driven Compensation for Bulk Formed Parts Based on Material Point Tracking,  Key Engineering Materials, Volume 794, 25. Februar 2019, S.277-284
DOI: 10.4028/www.scientific.net/KEM.794.277

Schöler, S.; Kock, C.; Özkaya, F.; Nowak, C.; Möhwald, K.; Behrens, B.-A.; Maier, H. J. (2019): Numerical simulation of the abrasive wear behavior of selectively oxidized α-Fe2O3 oxide layers on tool steel surfaces,  The Journal of The Minerals (JOM), 2019

Schöler, S.; Schmieding, M.; Yilkiran, D.; Özkaya, F.; Nowak, C.; Möhwald, K.; Behrens, B.-A.; Maier, H. J. (2019): Wear behavior of selectively oxidized α-Fe2O3 oxide low-friction layer systems on PM tool steel surfaces,  Wear Vol. 426-427, 30. April 2019, S.1603 – 1615
DOI: 10.1016/j.wear.2019.01.009

Simon Schöler, Maurice Schmieding, Deniz Yilkiran, Fahrettin Özkaya, Christopher Nowak, Kai Möhwald, Bernd-Arno Behrens, Hans Jürgen Maier (2019): Wear behavior of selectively oxidized α-Fe2O3 oxide low-friction layer systems on PM tool steel surfaces ,  Wear Vol. 426-427 (2017) 1603 – 1615. Elsevier
DOI: 10.1016/j.wear.2019.01.009

Siqueira, R.; Bibani, M.; Duran, D.; Mozgova, I.; Lachmayer, R.; Behrens, B.-A. (2019): An adapted case-based reasoning system for design and manufacturing of tailored forming multi-material components,  International Journal on Interactive Design and Manufacturing (IJIDeM), Vol 13, Issue 3, September 2019, S.1175-1184
DOI: 10.1007/s12008-019-00566-7

Behrens, B.-A.; Chugreev, A.; Matthias, T. (2018): Hybride Lagerbuchsen aus Aluminium und Stahl,  wt Werkstatttechnik online Jahrgang 108 (2018) H. 10

B.-A. Behrens, C. Klose, A. Chugreev, N. Heimes, S. E. Thürer, J. Uhe (2018): A Numerical Study on Co-Extrusion to Produce Coaxial Aluminum-Steel Compounds with Longitudinal Weld Seams,  Metals (8) 717
DOI: 10.3390/met8090717

Behrens, B. A.; Chugreev, A.; Hootak, M. (2018): A sectionwise defined model for the material description of 100Cr6 in the thixotropic state ,  AIP Conference Proceedings 1960
DOI: 10.1063/1.5034860

Behrens, B.-A.; Chugreev, A.; Awiszus, B.; Graf, M.; Kawalla, R.; Ullmann, M.; Korpala, G.; Wester, H. (2018): Sensitivity Analysis of Oxide Scale Influence on General Carbon Steels during Hot Forging,  Metals 2018 Vol. 8(2)

Behrens, B.-A.; Bohr, D. (2018): Manufacturing of functionally graded metal matrix composite materials by segregation,  International Journal of Materials Research (formerly Zeitschrift für Metallkunde) 109(5), pp 373–380.
DOI: 10.3139/146.111619

Behrens, B.-A.; Brunotte, K.; Bohr, D. (2018): Experimental Investigation of Endogenous Lubrication during Cold Upsetting of Sintered Powder Metallurgical Components,  Key Engineering Materials, Vol. 767, pp 163-170.
DOI: 10.4028/www.scientific.net/KEM.767.163

Behrens, B.-A.; Chugreev, A.; Kock, C. (2018): Experimental-numerical approach to efficient TTT-generation for simulation of phase transformations in thermomechanical forming processes,  IOP Conference Series: Materials Science and Engineering. 461:012040
DOI: 10.1088/1757-899X/461/1/012040

Behrens, B.-A.; Chugreev, A.; Matthias, T. (2018): Characterisation of the joining zone of serially arranged hybrid semi-finished components ,  AIP Conference Proceedings 1960, 040002 (2018); doi: 10.1063/1.5034856

Behrens, B.-A.; Diaz-Infante, D.; Altan, T.; Yilkiran, D.; Wölki, K.; Hübner, S. (2018): Improving Hole Expansion Ratio by Parameter Adjustment in Abrasive Water Jet Operations for DP800,  SAE International Journal of Materials and Manufacturing, 11(3)

Behrens, B.-A.; Hübner, S.; Neumann, A.; Vogt, H.; Meschut, G.; Meyer, S. (2018): Funktionsintegration in der Warmblechumformung,  wt Werkstattstechnik online Jahrgang 108 (2018), Ausgabe 10, S. 674-678

Behrens, B.-A.; Kuwert, P. (2018): Pulvermetallurgie und Verbundschmieden – Erprobung der Verfahrenskombination zur Herstellung festigkeitskonsistenter hybrider Bauteile,  wt Werkstatttechnik online Jahrgang 108 (2018) H. 10

Behrens, B.-A.; Lippold, L. (2018): Influence of shot peened surfaces on friction in hot forging,  Surface Topography: Metrology and Properties, Vol. 6, No. 4
DOI: 10.1088/2051-672X/aae91c

Brands, D.; Chugreev, A.; Kock, C.; Niekamp, R.; Scheunemann, L.; Uebing, S.; Behrens, B.-A.; Schröder, J. (2018): On the analysis of microstructural residual stresses in hot bulk forming parts under specific cooling,  Proceedings in Applied Mathematics and Mechanics, 18:e201800256
DOI: 10.1002/pamm.201800256

Bruns, C.; Micke-Camuz, M.; Bohne, F.; Raatz, A. (2018): Process design and modelling methods for automated handling and draping strategies for composite components,  CIRP Annals, Volume 67, Issue 1, 2018, Pages 1-4

Chugreeva, A.; Mildebrath, M.; Diefenbach, J.; Barroi, A.; Lammers, M.; Hermsdorf, J.; Hassel, T.; Overmeyer, L.; Behrens, B.-A. (2018): Manufacturing of High-Performance Bi-Metal Bevel Gears by Combined Deposition Welding and Forging,  Metals, 8, 2018 (11), 898
DOI: 10.3390/met8110898

Commichau, O.; Krimm, R.; Behrens, B.-A. (2018): Elektromagnetischer Vorschub für Rundstangen und Profile unter Einsatz magnetfeldformender Elemente,  IGF-Vorhaben 18863 N/1. Forschungsvereinigung: Verein Deutscher Werkzeugmaschinen-fabriken e.V. (VDW), AIF, Frankfurt 2018

Dean, A.; Rolfes, R.; Behrens, B.-A., Hübner, S.; Chugreev, A.; Grbic, N. (2018): Parametric Study of Hybrid Metal-Composites Clinching Joints,  Key Engineering Materials, ISSN: 1662-9795, Vol. 767, pp 413-420
DOI: 10.4028/www.scientific.net/KEM.767.413
ISBN: 1662-9795, Vol. 767, pp 413-420

Koch, S.; Behrens, B.-A.; Hübner, S.; Scheffler, R.; Wrobel, G.; Pleßow, M.; Bauer, D. (2018): 3D CAD modeling of deep drawing tools based on a new graphical language,  Computer-Aided Design and Applications, 15(2018)5, S. 619 – 630
DOI: https://doi.org/10.1080/16864360.2018.1441228

Krimm, R.; Behrens, B.-A.; Koß, J. (2018): Energieeffizienz von Umformmaschinen,  wt Werkstattstechnik online, 10-2018, S. 646-651

Pape, F.; Coors, T.; Barroi, A.; Hermsdorf, J.; Mildebrath, M.; Hassel, T.; Kaierle, S.; Matthias, T.; Chugreev, T.; Chugreeva, A.; Behrens, B.-A.; Overmeyer, L.; Poll, G. (2018): Tribological Study on Tailored-Formed Axial Bearing Washers,  Tribology Online, Vol. 13, No. 6 (2018) 320-326
DOI: 10.2474/trol.13.320
ISBN: 1881-2198

Behrens, B.-A.; Bonk, C.; Bouguecha, A.; Thürer, S. E.; Uhe, J.; Golovko, O.; Klose, C. (2017): Mechanical Properties of Co-Extruded Aluminium-Steel Compounds,  Key Engineering Materials Volume 742
DOI: https://doi.org/10.4028/www.scientific.net/KEM.742.512

Behrens, B.-A.; Bougecha, A., Bonk, C.; Chugreev, A. (2017): Experimental investigations on the transformation-induced plasticity in a high tensile steel under varying thermo-mechanical loading ,  Computer Methods in Materials Science, Vol. 17, No. 1, 2017, pp. 36-43.

Behrens, B.-A.; Bouguecha, A.; Bonk, C.; Bonhage, M.; Chugreeva, A.; Matthias, T. (2017): FE-based Design of a Forging Tool System for a Hybrid Bevel Gear,  Key Engineering Materials; ISSN: 1662-9795, Vol. 742, pp 544-551; doi:10.4028/ www.scientific.net/KEM.742.544

Behrens, B.-A.; Bouguecha, A.; Bonk, C.; Matthias, T. (2017): Importance of material and friction characterisation for FE-aided process design of hybrid bevel gears,  AIP Conference Proceedings 1896, 190016 (2017)
DOI: 10.1063/1.5008229

Behrens, B.-A.; Bouguecha, A.; Bonk, C.; Yarcu, D.; Kazhai. M. (2017): Numerical and Experimental Investigations on an Extrusion Process for a Newly Developed Ultra-High-Carbon Lightweight Steel for the Automotive Industry,  IOP Conf. Series: Materials Science and Engineering 179 (2017)
DOI: 10.1088/1757-899X/179/1/012005

Behrens, B.-A.; Bouguecha, A.; Lerch, M.; Windhagen, H.; Almohallami, A. (2017): Influence of hip prosthesis size and its coating area on bone remodelling: A numerical inpestigation on a short stem uncemented hip implant,  IEEE Trans Nanobioscience. 2017 Sep 11.
DOI: 10.1109/TNB.2017.2750724

Behrens, B.-A.; Bouguecha, A.; Vucetic, M.; Grbic, N. (2017): Numerical analysis of a deep drawing process with additional force transmission for an extension of the process limits,  IOP Conf. Series: Materials Science and Engineering 179 (2017) 012006
DOI: 10.1088/1757-899X/179/1/012006

Behrens, B.-A.; Bouguecha, A.; Vucetic, M.; Schulze, H. (2017): Finite element analysis regarding the forming behaviour of symmetric hybrid structures consisting of two sheet metal outer layers and a thermoplastic core,  IOP Conf. Series: Materials Science and Engineering 179 (2017)
DOI: 10.1088/1757-899X/179/1/012004

Behrens, B.-A.; Bräuer,G.; Hübner, S.; Jalanesh, M.; Lorenz, E.; Weber, M.; Zimbelmann, S. (2017): Development and validation of a new method for accelerated and economic wear testing of tool materials for deep drawing applications ,  WEAR, 15 April 2017 Volumes 376–377, Part B, pp. 1814–1821

Behrens, B.-A.; Hübner, S.; Vogt, H. (2017): Umformung von höchstfesten Aluminiumlegierungen,  wt Werkstatttechnik online, Jahrgang 107, Ausg. 10, S. 695-699, Springer-VDI Verlag, Düsseldorf

Behrens, B.-A.; Hübner, S.; Wölki, K. (2017): Acoustic emission – A promising and challenging technique for process monitoring in sheet metal forming,  Journal of Manufacturing Processes, Volume 29, pp. 281-288

Behrens, B.-A.; Krimm, R.; Altan, L.; Hasselbusch, T.; Ortmaier, T.; Dagen, M.; Ahrens, M. (2017): Miniaturisierte Schneidmaschine - Neuartiges Konzept zur Herstellung kleiner Stanzteile im Resonanzbetrieb,  wt Werkstattstechnik online, Ausgabe 3 (2017), Springer-VDI-Verlag, Düsseldorf

Behrens, B.-A.; Lippold, L.; Puppa, J.; Hübsch, C.; Langen, D.; Möhwald, K. (2017): Steigerung der Verschleißbeständigkeit von Schmiedegesenken durch PVD-abgeschiedene Hartstoffschichten auf Titanbasis,  Forschung im Ingenieurwesen (2017) 81:1-12
DOI: 10.1007/s10010-016-0209-6

Behrens, B.-A.; Yarcu, D.; Petersen, T.; Ross, I. (2017): Induktive Erwärmung partiell verstärkter Presslinge,  wt Werkstattstechnik online Jahrgang 107 (2017), Ausgabe 10, S. 700-705, Springer-VDI-Verlag, Düsseldorf

Thürer, S. E., Uhe, J., Golovko, O., Bonk, C., Bouguecha, A., Klose, C.; Behrens, B.-A.; Maier, H. J. (2017): Co-extrusion of semi-finished aluminium-steel compounds,  AIP Conference Proceedings
DOI: 10.1063/1.5008158

Yilkiran, D;. Wulff, D.; Almohallami, A.; Özkaya, F.; Bouguecha, A.; Hübner, S.; Möhwald, K.; Maier, H. J.; Behrens, B.-A. (2017): Wear behaviour of thermally oxidised tool surfaces as low-friction separation layers for dry sheet metal forming,  Wear Vol. 376 – 377 (2017) 1789 – 1803. Elsevier
DOI: 10.1016/j.wear.2017.01.084

Yilkiran, D;. Wulff, D.; Almohallami, A.; Özkaya, F.; Bouguecha, A.; Hübner, S.; Möhwald, K.; Maier, H. J.; Behrens, B.-A. (2017): Wear behaviour of thermally oxidised tool surfaces as low-friction separation layers for dry sheet metal forming ,  Wear Vol. 376 – 377 (2017) 1789 – 1803. Elsevier
DOI: 10.1016/j.wear.2017.01.084

Almohallami, A.; Rusch, M.; Vucetic, M.; Bouguecha, A.; Bambach, M.; Behrens, B. A. (2016): Joining by Upset Bulging at Elevated Temperatures,  Advanced Materials Research, Vol. 1140, pages 115-122

Behrens B.-A.; Koch, S.; Pleßow, M.; Wrobel, G.; Bauer, D.; Scheffler R. (2016): Eine neue Modellierung von Tiefziehwerkzeugen,  wt Werkstattstechnik online, 10-2016, S. 690-694

Behrens, B-A.; Lippold, L.; Kazhai, M.; Bouguecha, A.; Vucetic, M.; Hübsch, C.; Möhwald, K. (2016): Prediction and Detection of Wear Mechanisms on an Industry-Oriented Hot Forging Die,  Advanced Materials Research, Vol. 1140, S. 91-98, Trans Tech Publications
DOI: 10.4028/www.scientific.net/AMR.1140.91

Behrens, B.-A. Prof.; Bouguecha, A.; Vucetic, M.; Huskic, A.; Uhe, J.; Frischkorn, C.; Matthias, T.; Stakhieva, A.; Duran, D.; Thürer, S. E.; Golovko, O.; Klose, C. (2016): Umformtechnische Herstellung hybrider Lagerbuchsen,  wt Werkstattstechnik online, Jahrgang 106 (2016) H. 10

Behrens, B.-A.; Betancur Escobar, S.; Niemeier, H.; Vucetic, M.; Bouguecha, A.; Lucas, K.; Nolte, I.; Wefstaedt, P.; Lerch, M.; Stukenborg-Colsman, C.; Almohallami, A. (2016): Design and manufacturing of a human standardised hip cup out of titanium: Konstruktion und Fertigung einer menschlichen standardisierten Hüftpfannenprothese aus Titan,  Materialwissenschaft und Werkstofftechnik 47(7)

Behrens, B.-A.; Bougecha, A.; Brunotte, K.; Dannenberg, M.; Huskic, A.; Bonhage, M. (2016): Reprocessing of aluminum chips by hot backward extrusion,  Production Engineering
DOI: 10.1007/s11740-016-0682-7

Behrens, B.-A.; Bouguecha, A.; Peshekhodov, I.; Schneider, M. (2016): A new approach for user-independent determination of formability of a steel sheet sheared edge,  Prod. Eng. Res. Devel. (2016) 10, S. 241–252

Behrens, B.-A.; Bouguecha, A.; Vucetic, M. ; Chugreev, A. (2016): Advanced Wear Simulation for Bulk Metal Forming Processes,  MATEC Web of Conferences, Vol. 80-2016, 04003, pp. 1-4, DOI: http://dx.doi.org/10.1051/matecconf/20168004003

Behrens, B.-A.; Bouguecha, A.; Vucetic, M.; Chugreev, A.; Rosenbusch, D. (2016): Advanced finite element analysis of die wear in sheet-bulk metal forming processes,  AIP Conference Proceedings, 1769, 130010 (2016), DOI:http://dx.doi.org/10.1063/1.4963529

Behrens, B.-A.; Bouguecha, A.; Vucetic, M.; Peshekhodov, I.; Kazhai, M.; Ganin, S.; Matveev, M. (2016): Physical simulation of precipitation hardened ferrite-pearlite steels during hot deformation processing,  Materials Physics and Mechanics, Ausg.: 25; S.: 9-15

Behrens, B.-A.; Bouguecha, A.; Vucetic, M.; Peshekhodov, I.; Matthias, T.; Kolbasnikov, N.; Sokolov, S.; Ganin, S. (2016): Experimental investigations on the state of the friction-welded joint zone in steel hybrid components after process-relevant thermo-mechanical,  AIP Conf. Proc. 1769, 130013 (2016)
DOI: http://dx.doi.org/10.1063/1.4963532

Behrens, B.-A.; Bouguecha, A.; Vucetic, M; Bonhage, M.; Malik, I. Y. (2016): Numerical investigation for the design of a hot forging die with integrated cooling channels,  Procedia Technology, Vol.: 26, 2016, pp. 51–58 http://dx.doi.org/10.1016/j.protcy.2016.08.008

Behrens, B.-A.; Dannenberg, M.; Mohammadifard, S.; Offers, J.-D.; Santangelo, A. (2016): Produktionsangepasste Konstruktion,  wt Werkstattstechnik online Jahrgang 106, H. 3, S. 175-180

Behrens, B.-A.; Krimm, R.; Reich, D.; Teichrib, S. (2016): Linear Drives in Metal Forming Machines and Peripherals – Recent Developments,  Journal of Manufacturing Processes 22, Elsevier, Amsterdam, S. 192 - 198, März 2016

Behrens, B.-A.; Puppa, J.; Huskic, A.; Brunotte, K.; Bouguecha, A.; Prüß, T. (2016): Influence of heat pipe cooling on the wear of hot forging dies,  Prod. Eng. Res. Devel
DOI: 10.1007/s11740-016-0698-z

Behrens, Bernd-Arno; Bouguecha, Anas; Buse, Christian; Wölki, Kai; Santangelo, Adrian (2016): Potentials of in situ monitoring of aluminium alloy forging by acoustic emission,  Archives of Civil and Mechanical Engineering, Volume 16, Issue 4, September 2016, pp 724-733
DOI: 10.1016/j.acme.2016.04.012

Bernd-Arno Behrens, Anas Bouguecha, Adis Huskic, Markus Baumer, Hanno Paschke, Lennard Lippold (2016): Increasing the efficiency of forging operations using adjusted tribological surfaces enhanced by hard coatings,  Tribology Online Vol. 11 (2016) No. 2 ITC Tokyo 2015 Special Issue (Part 1) p. 432-443
DOI: 10.2474/trol.11.432

Golovko, O.; Puppa, J.; Nürnberger, F.; Rodman, D.; Maier, H. J.; Behrens, B.-A. (2016): Development of intelligent hot forging tools with increased wear resistance by cyclic edge-zone hardening,  Proceedings of the 10th TOOL Conference, Bratislava, October 4th to 7th, 2016, pp. 291-300
ISBN: ISBN 978-3-200-04786-0

Gröbel, D.; Schulte, R.; Hildebrand, P.; Lechner, M.; Engel, U.; Sieczkarek, P.; Wernicke, S.; Gies, S.; Tekkaya, E.; Behrens, B.-A.; Hübner, S.; Vucetic, M.; Koch, S.; Merklein, M.: (2016): Manufacturing of functional elements by sheet-bulk metal forming processes. In: Production Engineering Research & Development Special Issue (2016); Vol. 10; S. 63 – 80,  Production Engineering Research & Development Special Issue (2016); Vol. 10; S. 63 – 80

Gröne, M.; Rosenbusch, D.; Krimm, R.; Behrens, B. (2016): Electromagnetic System to Improve the Manufacturing Accuracy at the Presence of Horizontal Process Forces.,  Production Engineering, 1140(2016), S. 369-376

Isik, K.; Gerstein, G.; Schneider, T.; Schulte, R.; Rosenbusch, D.; Clausmeyer, T.; Nürnberger, F.; Vucetic, M.; Koch, S.; Hübner, S.; Behrens, B.-A.; Tekkaya, E.; Merklein, M. (2016): Investigations of ductile damage during the process chains of toothed functional components manufactured by sheet-bulk metal forming, In: Production Engineering Research & Development Special Issue (2016); Vol. 10; S. 5 – 15,  Production Engineering Research & Development Special Issue (2016); Vol. 10; S. 5 – 15

Masood Jalanesh, Andre Miller, Marco Hehmann, André Spiekermeier, Sven Hübner, Bernd-Arno Behrens (2016): Process-integrated projection welding during deep drawing,  WGP-Kongress 05.09.2016-06.09.2016, Vol.1040 (2016) pp. 59-66

A. Almohallami, B.-A. Behrens, A. Bouguecha, M. Lerch, S. Betancur, C. Stukenborg-Colsman, I. Nolte, K. Lucas (2015): Numerical analysis of the biomechanical complications accompanying the total hip replacement with NANOS-Prosthetic: bone remodelling and prosthesis migration,  Current Directions in Biomedical Engineering. Band 1, Heft 1, Seiten 381–385
DOI: 10.1515/cdbme-2015-0093
ISBN: 2364-5504

B. Viehweger, A. Sviridov, P. Grützner, B.-A. Behrens, A. Bouguecha, A. Almohallami (2015): Ermittlung von Verfahrensgrenzen für das Fügen durch Knickbauchen anhand des Werkstoffes E235+N,  Volume 46, Issue 8, pages 804–812, August 2015

B.-A. Behrens, A. Bouguecha, M. Vucetic, S. Betancur Escobar, C. Stukenborg-Colsman, M. Lerch, I. Nolte and A. Almohallami (2015): Numerische Betrachtung der biomechanischen Komplikationen begleitend zur Totalhüftgelenkprothese: Knochenumbau und Prothesenmigration,  Materialwissenschaft und Werkstofftechnik, Volume 46, Issue 9, pages 881–893, September 2015

B.-A. Behrens, R. Krimm, T. M. Demke, M. Gröne (2015): Vermeidung von Stößelversatz mit Elektromagneten. Aufbau und Konzept zur Integration einer Aktorik in Pressen zur Vermeidung von Stößelversatz,  wt Werkstattstechnik online Jahrgang 105 (2015) H. 10, S.687-691

B.-A. Behrens, S. Betancur Escobar, H. Niemeier, A. Almohallami, M. Vucetic, I. Nolte, K. Lucas, C. Stukenborg-Colsmann, M. Lerch, A. Bouguecha (2015): Fertigung einer universellen Hüftprothesenpfanne mittels Hochdruckblechumformung,  Materialwissenschaft und Werkstofftechnik, Volume 46, Issue 9, pages 894–910, September 2015

Behrens, B-A.; Bouguecha, A.; Bouguecha, S. M.; Klassen, A.; Bonhage, M. (2015): Conception of a hot forging die out of metal powder equipped with inner cooling channels,  Powder Metallurgy, Volume 58, Issue 3, pp. 166-170
DOI: 10.1179/0032589915Z.000000000239

Behrens, B.-A.; Bouguecha, A.; Vucetic, M.; Hübner, S.; Yilkiran, D.; Jin, Y.; Peshekhodov, I. (2015): FEA-based optimisation of a clinching process with an open multiple-part die aimed at damage minimisation in CR240BH-AlSi10MnMg joints,  Materials science, Engineering and Chemistry Volume 21 – 2015, 04009-pp 1-7

Behrens, B.-A.; Bouguecha, A.; Vucetic, M.; Hübner, S.; Yilkiran, D.; Jin, Y.; Peshekhodov, I. (2015): FEA-based optimisation of a clinching process with a closed single-part die aimed at damage minimisation in CR240BH-AlSi10MnMg joints,  Key Engineering Materials, Vols 651-653 (2015) pp 1487-1492

Behrens, B.-A.; Huskic, A.; Frischkorn, C.; Duran, D. (2015): Fließpressen hybrider Halbzeuge,  wt Werkstattstechnik online, Jahrgang 105 (2015), Ausgabe 10, S.704-708, Springer-VDI-Verlag, Düsseldorf.

Behrens, B.-A.; Krimm, R.; Jocker, J.; Nitschke T. (2015): Leistungsverzweigter Servopressenantrieb,  wt Werkstattstechnik online, Ausgabe 5-2015, S. 291-296, Springer-VDI-Verlag, Düsseldorf

Behrens, B.-A.; Lachmayer, R.; Malik, I.; Bonhage, M.; Sauthoff, B.; Gottwald, P. (2015): Sensorik in Schmiedewerkzeugen Temperierung von Gesenken für die Warmmassivumformung steigert Präzision und reduziert Verschleiß ,  wt-online 10-2015, Seite 692-696

Behrens, B.-A.; Prüß, T. (2015): Alternative Temperature Control of Closed Forging Dies Using Heat Pipes,  Key Engineering Materials Vols. 651-653 (2015) pp 311-316; Trans Tech Publications, Switzerland
DOI: 10.4028/www.scientific.net/KEM.651-653.311

Bernd-Arno Behrens, Sonda Moakhar Bouguecha, Milan Vucetic, Anas Bouguecha, Mohammad Kazhai (2015): Experimental Investigations and Automatic Numerical Optimization of a Bulk Metal Forming Process to Avoid Forging Folds,  Key Engineering Materials Vols. 651-653 (2015) pp 305-310; Trans Tech Publications, Switzerland
DOI: 10.4028/www.scientific.net/KEM.651-653.305

Bruchwald, O.; Frackowiak, W.; Bucquet, T.; Huskic, A.; Reimche. W.; Maier, H. J. (2015): In-situ-Erfassung der Werkstoffumwandlung und Gefügeausbildung von Schmiedebauteilen im Abkühlpfad ,  HTM Journal of Heat Treatment and Materials 70 (2015), S. 150-161

Engelhardt, M.; Behne, D.; Grittner, N.; Neumann, A.; Reimche, W.; Klose, C. (2015): Non-destructive Testing of Longitudinal and Charge Weld Seams in Extruded Aluminum and Magnesium Profiles,  Materials Today: Proceedings. Aluminium Two Thousand World Congress and International Conference on Extrusion and Benchmark ICEB
DOI: 10.1016/j.matpr.2015.10.037

Gladkov, Y.; Peshekhodov, I.; Vucetic, M.; Bouguecha, A.; Behrens, B.-A. (2015): Implementation of the Bai & Wierzbicki fracture criterion in QForm and its application for cold metal forming and deep drawing technology,  MATEC Web of Conferences, Ausgabe 21-2015. S. 12009-p.1 - 12009-p.7

Matthias, S.; Loderer, A.; Koch, S.; Gröne, M.; Kästner, M.; Hübner,S.; Krimm, R.; Reithmeier, E.; Hausotte, T.; Behrens, B.-A. (2015): Metrological solutions for an adapted inspection of parts and tools of a sheet-bulk metal forming process,  Journal: Production Engineering

Paschke, H.; Yilkiran, T.; Lippold, L.; Brunotte, K.; Weber, M.; Braeuer, G.; Behrens, B.-A. (2015): Adapted surface properties of hot forging tools using plasma technology for an effective wear reduction,  Wear Vols. 330-331 (2015) pp 429-438; Elsevier
DOI: 10.1016/j.wear.2015.02.009

Puppa, J.; Behrens, B.-A. (2015): Optimization of Cooling and Lubrication for Nitrided and Ceramic-Coated Hot Forging Dies,  Applied Mechanics and Materials Vol. 794 (2015) pp. 97-104, Trans Tech Publications, Switzerland

R. Krimm, B.-A. Behrens, D. Reich (2015): Hybridaktorischer Pressenantrieb,  wt Werkstattstechnik online Jahrgang 105 (2015) H. 10, S. 747-752

Schneider, M.; Geffert, A.; Peshekhodov, I.; Bouguecha, A.; Behrens, B.-A. (2015): Overview and comparison of various test methods to determine formability of a sheet metal cut-edge and approaches to the test results application in forming analysis,  Materialwissenschaft und Werkstofftechnik, 46 Ausgabe, S. 1196 - 1217

Y.A. Galdkov, I.A. Peshekhodov, M. Vucetic, A. Bouguecha, B.-A. Behrens (2015): Realisation of Bai-Wierzbicki damage criterion in QForm for modelling cold forming processes on an example of deep drawing of a high-strength steel (in Russian),  Kuznecho-Shtampovochnoe Proizvodstvo 1 (2015) S. 33-38

Ahmad Al-Qudsi, Matthias Kammler, Anas Bouguecha, Christian Bonk, Bernd-Arno Behrens (2014): Comparison between different numerical models of densification during solid-state sintering of pure aluminium powder,  Production Engineering, August 2014, Springer Berlin Heidelberg
DOI: 10.1007/s11740-014-0574-7

Behrens, B.-A.; Bouguecha, A.; Jeske, M.; Moritz, J.; Vucetic, M.; Matthias, T. (2014): Numerische Berechnung einer integrierten Wärmebehandlung für das Gleitziehbiegen von Profilen und die experimentelle Umsetzung,  HTM Journal of Heat Treatment and Materials Dezember 2014, Jg. 69, Ausgabe 6. Seiten: 339–347

Behrens, B.-A.; Frischkorn, C. (2014): Induktive Erwärmung von partikelverstärkten Stahlpresslingen in den thixotropen Temperaturbereich,  Materialwissenschaft und Werkstofftechnik, Volume 45, Issue 3, S. 177–186

Behrens, B.-A.; Frischkorn, C. (2014): Thixoforging of particle-reinforced steel materials,  Production Engineering
DOI: 10.1007/s11740-014-0533-3

Behrens, B.-A.; Frischkorn, C.; Bonhage, M. (2014): Reprocessing of AW2007, AW6082 and AW7075 aluminium chips by using sintering and forging operations ,  Production Engineering
DOI: 10.1007/s11740-014-0542-2

Behrens, B.-A.; Kazhai, M. (2014): Numerical and Experimental Investigations on Fold Formation in Forged Parts,  Key Engineering Materials Vols. 611-612 (2014) pp 212-220; Trans Tech Publications, Switzerland
DOI: 10.4028/www.scientific.net/KEM.611-612.212

Behrens, B.-A.; Kazhai, M.; Prüß, T (2014): Potentials of Ceramic Die Materials for Isothermal Forging Purposes of a Titanium Alloy,  Key Engineering Materials Vols. 611-612 (2014) pp 202-211
DOI: 10.4028/www.scientific.net/KEM.611-612.202

Behrens, B.-A.; Krimm, R.; Gröne, M. (2014): Stößelversatz mit neuartigem System vermeiden,  wt Werkstattstechnik online Jahrgang 104 (2014), Springer-VDI-Verlag GmbH & Co. KG, Düsseldorf

Behrens, B.-A.; Puppa, J.; Menze, J. (2014): Abkühlverhalten nitrierter und keramisch beschichteter Schmiedewerkzeuge,  wt Werkstattstechnik online, Jahrgang 104 (2014) Ausgabe 10, S.686-690, Springer-VDI-Verlag, Düsseldorf

Behrens, B.-A.; Yilkiran, T.; Ocylok, S.; Weisheit, A.; Kelbassa, I. (2014): Deposition welding of hot forging dies using nanoparticle reinforced weld material,  Production Engineering – Research and Development, German Academic Society for Production Engineering (WGP), 2014
DOI: 10.1007/s11740-014-0562-y

Behrens,B.-A.; Denkena, B.; Park, H.-S.; Henjes, J.; Kröning, S.; Yilkiran, T.; Klassen, A. (2014): Application of methods for ecological optimization of crank shaft forging process, Production Engineering – Research and Development,  German Academic Society for Production Engineering (WGP), Heft 8, S. 253-261

Braeuer, G.; Paschke, H.; Weber, M.; Behrens, B.-A.; Yilkiran, T. (2014): Surface modifications for optimized forming operations. Key Engineering Materials, Vols. 611-612 (2014), pp 231-239
DOI: 10.4028/www.scientific.net/KEM.611-612.231

Denkena, B.; Behrens, B.-A.; Dannenberg, M.; Georgiadis, A. (2014): Optimierung alternativer Schmiedeprozessketten,  wt Werkstattstechnik online, Jg. 104 (2014), H. 10, S. 691-695, Springer-VDI-Verlag, Düsseldorf

Fischer, M.; Dickert, H. H.; Bleck, W.; Huskic, A.; Kazhai, M.; Hadifi, T.; Bouguecha, A.; Behrens, B.-A.; Labanova, N.; Felde, A.; Liewald, M.; Egorov, F.; Garbrecht, M.; Brinksmeier, E.; Reimche, W.; Bruchwald, O.; Frackowiak, W.; Maier, H. J.; Bucquet, T.; Hinrichs, B.; Fritsching, U.; Hoja, T.; Hoffmann, F.; Zoch, H.-W. (2014): EcoForge: Energieeffiziente Prozesskette zur Herstellung von Hochleistungs-Schmiedebauteilen,  HTM Journal of Heat Treatment and Materials, August 2014, Band 69, Nr. 4, S.209-219

Klassen, A.; Bouguecha, A.; Behrens, B.-A. (2014): Wear Prediction for Hot Forging Dies under Consideration of Structure Modification in the Surface Layer,  Advanced Materials Research, Vol 1018, pp. 341-348, Sep. 2014

Teichrib, S.; Krimm, R.; Behrens, B.-A. (2014): Electromagnetic Sheet Metal Feeder,  Key Engineering Materials, Vols. 611-612 (2014), pp 939-946, Trans Tech Publications, Switzerland

B.-A. Behrens ,A. Bouguecha ,J. Rosenberger ,T. Matthias (2013): Numerical analysis of draw bending of load-adapted sheet metal profiles,  Production Engineering – Research and Development; Springer Verlag, 2013
DOI: 10.1007/s11740-013-0491-1

B.-A. Behrens, A. Bouguecha, M. Vucetic, I. Peshekhodov (2013): An experimental-numerical method to characterize formability of sheet metals in a wide range of stress states with the help of a tensile-shear test on new butterfly specimens,  Humanities and Science University Journal 5 (2013) S. 101-110

Behrens, B.-A.; Bouguecha, A.; Huinink, T.; Peshekhodov, I.; Matthias, T.; Moritz, J.; Schrödter J. (2013): Untersuchung des Fließverhaltens der Magnesiumknetlegierung AZ31 mit Hilfe von Schichtstauch- und Zugversuchen,  Materialwissenschaft und Werkstofftechnik, Volume 44, Issue 9, WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim, pp. 760–767

Behrens, B.-A.; Bouguecha, A.; Vucetic, M.; Peshekhodov I. (2013): An experimental-numerical method to characterise formability of sheet metals in a wide range of stress states with the help of a tensile-shear test on new butterfly specimens,  Humanities and Science University Journal of the St. Petersburg University Consortium, 5. Ausgabe, p. 101-110

Behrens, B.-A.; Götze, T. (2013): Temperature-dependent anisotropic material modeling of the sheet metal component within the polymer injection forming process,  Production Engineering – Research and Development; Springer Verlag
DOI: 10.1007/s11740-013-0511-1

Behrens, B.-A.; Kosch, K.-G. (2013): Characterizing the buckling behavior of cylindrical hollow and hybrid specimens by experimental upsetting tests,  Production Engineering - Research and Development, Vol. 7, S. 167-176
DOI: 10.1007/s11740-013-0445-7

Behrens, B.-A.; Krimm, R.; Salfeld, V. (2013): New Methods to Reduce the Vibrations of the Ram and the Press Body while Blanking of Sheet Metal,  Key Engineering Materials Vol. 549 (2013) pp. 277-283, Trans Tech Publications, Switzerland

Behrens, B.-A.; Lippold, L.; Knigge, J. (2013): Investigations of the shear behaviour of aluminium alloys,  Production Engineering – Research and Development; German Academic Society for Production Engineering (WGP)
DOI: 10.1007/s11740-013-0450-x

Behrens, B.-A.; Maier, H.-J.; Bach, F. W.; Reimche, W.; Mroz, G.; Schrödter, J.; Jocker, J. (2013): A method to detect the level and direction of mechanical forces with the aid of load-induced martensitic phase transformation,  Production Engineering: Research & Development, Springer Verlag, Online veröffentlicht am 16.11.2013

Behrens, B.-A.; Overmeyer, L.; Barroi, A.; Frischkorn, C.; Hermsdorf, J.; Kaierle, S.: Stonis, M.; Huskic, A. (2013): Basic study on the process combination of deposition welding and subsequent hot bulk forming,  Production Engineering – Research and Development, 05/2013, S. 1-9

Behrens, B.-A.; R. Krimm; T. Nguyen (2013): Virtuelle Reglerparametrierung von Servoantrieben - Autoadaptive Anpassung der Reglerparameter mittels evolutionären Optimierungsalgorithmen,  wt Werkstattstechnik online, Ausgabe 10/2013, S.770-775, 2013

Behrens, B.-A.; Santangelo, A.; Buse, C. (2013): Acoustic emission technique for online monitoring during cold forging of steel components - a promising approach for online crack detection in metal forming,  Production Engineering - Research and Development
DOI: 10.1007/s11740-013-0452-8

Behrens, B.-A.; Tekkaya, A. E.; Kosch, K.-G.; Foydl, A.; Kammler, M.; Jäger, A. (2013): Manufacturing of steel-reinforced aluminum parts by co-extrusion and subsequent forging,  Key Engineering Materials, Vol. 585, S. 149-156

Behrens, B.-A.; Yilkiran, T.; Braeuer, G.; Paschke, H.; Weber, M. (2013): Potential of Duplex Plasma Deposition Processes for the Improvement of Wear Resistance of Hot Forging Dies,  Key Engineering Materials Vols. 554-557 pp. 345-358, 2013
DOI: 10.4028/www.scientific.net/KEM.554-557.345

C. Frischkorn, A. Huskic, J. Hermsdorf, A. Barroi, S. Kaierle, B.-A. Behrens and L. Overmeyer (2013): Investigation on a new process chain of deposition or friction welding and subsequent hot forging,  Materialwissenschaft und Werkstofftechnik, Volume 44, Issue 9, pages 783–789, September 2013

Denkena, B.; Park, H.-S.; Behrens, B.-A.; Henjes, J.; Bertys, S.; Dahal, P.; Lüken, I.; Klassen, A. (2013): Development of a Concept to Optimize the Energy Efficiency in Forging Process Chains,  Int. J. Precis. Eng. Manuf., 14, 2013, 7, pp.1229-1236

K.-G. Kosch, P. Freytag, T. Matthias, K. Kerber, A. Bouguecha (2013): Verbund-Gießschmieden hybrider Aluminiumbauteile,  Materialwissenschaft und Werkstofftechnik, Volume 44, Issue 10, WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim, pp. 819–824

Peshekhodov, I.; Schneider, M. (2013): Numerical Investigations on Cutting of Dual-Phase Sheet Steel with an Emphasis on Material Damage at the Cut Edge,  Advanced Materials Research; Ausgabe: 769; Seiten: 101-108

Salfeld, V.; Krimm, R.; Hübner, S.; Matthias, T.; Vucetic, M. (2013): Sheet-Bulk Metal Forming of Symmetric and Asymmetric Parts,  Advanced Materials Research Vol. 769 (2013), pp. 229-236

Santangelo,A.; Blanke,P.; Hadifi,T.; Wolter,F.-E.; Behrens,B.-A. (2013): Fast 3D inverse simulation of hot forging processes via Medial Axis Transformation: an approach for preform estimation in hot die forging,  Production Engineering - Research and Development
DOI: 10.1007/s11740-013-0461-7

Teichrib, S.; Krimm, R. (2013): Electromagnetic Material Feeder for High Speed Rates,  Advanced Materials Research Vol. 769, pp 213-220, Trans Tech Publications, Switzerland, 2013

V. Salfeld, T. Matthias, R. Krimm, B.-A. Behrens, P. Sieczkarek, N. Ben Khalifa, A. E. Tekkaya, H. Hetzner, S. Tremmel, S. Wartzack (2013): Maschinen- und werkzeugseitige Herausforderungen bei der Blechmassivumformung von komplexen Bauteilen, 2. Workshop Blechmassivumformung 2013
ISBN: 978-3-87525-353-5

Behrens, B.-A. Krimm, R.; Salfeld V. (2012): Process-Machine Interaction in Sheet-Bulk Metal Forming,  Key Engineering Materials Vols. 504-506 (2012) pp 999-1004

Behrens, B.-A.; Bach, Fr.-W.; Bouguecha, A; Nürnberger, F.; Schaper, M.; Yu, Z.; Klassen, A. (2012): Numerische Berechnung einer integrierten Wärmebehandlung für präzisionsgeschmiedete Bauteile,  HTM, Jahrgang 67, 2012, Heft 5, S.337-343

Behrens, B.-A.; Bleck, W.; Bach, Fr.-W.; Brinksmeier, E.; Fritsching, U; Liewald, M.; Zoch, H.-W. (2012): EcoForge: Resource-efficient process chains for high performance parts,  Key Engineering Materials, Vol. 504-506, S. 151-156

Behrens, B.-A.; Bouguecha, A. (2012): Numerische und experimentelle Untersuchungen zum Matrizenpressen und Sintern von Aluminiumpulver,  Mat.-wiss. und Werkstofftech. 43 (6), 511-519

Behrens, B.-A.; Bouguecha, A.; Eckold, C.-P.; Peshekhodov, I. (2012): A new clinching process especially for thin metal sheets and foils,  Key Engineering Materials Vols 504-506 (2012), S. 783-788

Behrens, B.-A.; Bouguecha, A.; Vucetic, M.; Peshekhodov, I. (2012): Characterisation of the quasi-static flow and fracture behaviour of dual-phase steel sheets in a wide range of plane stress states,  Archives of Civil and Mechanical Engineering 12 (2012) 397 – 406

Behrens, B.-A.; Frischkorn, C.; Lüken, I. (2012): Development of an innovative monitoring system for spray fields in hot forging processes Production Engineering – Research and Development; German Academic Society for Production Engineering (WGP) (doi: 10.1007/s11740-012-0396-4)

Behrens, B.-A.; Gaebel, C. M. (2012): Formability of an anti-fingerprint clear coating on satin stainless steel sheet metal,  Production Engineering – Research and Development (WGP) (Prod. Eng. Res. Devel. DOI 10.1007/s11740-012-0434-2)

Behrens, B.-A.; Kosch, K.-G.; Frischkorn, C.; Vahed, N.; Huskic, A. (2012): Compound forging of hybrid powder-solid-parts made of steel and aluminum,  Key Engineering Materials, Vol. 504-506, S. 175-180

Behrens, B.-A.; Krimm, R.; Kammler, M.; Schrödter, J.; Wager, C. (2012): Fatigue analysis of a mechanical press by means of the hybrid multi-body simulation,  Production Engineering 6/2012 pp. 421 - 430, Springer, Heidelberg, 2012

Behrens, B.-A.; Krimm, R.; Matthias, T.; Salfeld, V. (2012): Analysis of Machine Influence on Process Stability in Sheet-Bulk Metal Forming,  Procedia CIRP Vol. 3 (2012) S. 32 – 36

Behrens, B.-A.; Krimm, R.; Teichrib, S.; Czora, M.; Cahyono, T.; Wager, C.; Ortmaier, T.; Riva, M.; Hussong, A.; Dagen, M. (2012): Hochleistungsmagnetaktorik als Pressenantrieb, wt Werkstattstechnik online, 102. Jahrgang, Ausgabe 3, S.171-174, 2012

Behrens, B.-A.; Vahed, N.; Kammler, M. (2012): Functionalisation of PM Components by Integration of Inherent Data Carriers and Sensory Elements,  Production Engineering Research and Development, 2012, online first, DOI 10.1007/s11740-012-0428-0

Behrens, B.-A.; Voges-Schwieger, K.; Bouguecha, A.; Mielke, J.; Vucetic M. (2012): Material Characterization for Sheet-Bulk Metal Forming,  Key Engineering Materials Vols. 504-506 (2012) pp 1029-1034, Trans Tech Publications, Switzerland, doi:10.4028

Behrens, B.-A.; Yilkiran, T. (2012): Influence of the fabrication method on the wear resistance of hot forging dies; Production Engineering – Research and Development; German Academic Society for Production Engineering (WGP) (doi: 10.1007/s11740-012-0373-y)

Behrens, B.-A; Bleck, W.; Bach, Fr.-W.; Brinksmeier, E.; Fritsching, U; Liewald, M.; Zoch, H.-W (2012): EcoForge: Resource-efficient process chains for high performance parts,  Key Engineering Materials, Vol. 504-506, S. 151-156

Bouguecha, A.; Hadifi, T.; Mielke, J.; Behrens, B.-A. (2012): Erhöhung der Berechnungsgenauigkeit bei der numerischen Abbildung von Warmmassivumformprozessen durch verbesserte Reibmodellierung,  Materialwissenschaft und Werkstofftechnik, WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim, Volume 43, No 10, 2012, S.839-850, ISSN: 0933-5137

Bouguecha, A.; Odening, D.; Huskic, A.; Hadifi, T. (2012): Numerical and experimental investigations on the heat treatment of forgings,  in: Behrens, B.-A., Bleck, W.; Bach, Fr.-W.; Brinksmeier, E.; Fritsching, U; Liewald, M.; Zoch, H.-W.: EcoForge: Resource-efficient process chains for high performance parts, Key Engineering Materials, Vol. 504-506, S. 151-156

Bouguecha, A.; Odening, D.; Huskic, A.; Hadifi, T; (2012): Numerical and experimental investigations on the heat treatment of forgings, in: Behrens, B.-A., Bleck, W.; Bach, Fr.-W.; Brinksmeier, E.; Fritsching, U; Liewald, M.; Zoch, H.-W.: EcoForge: Resource-efficient process chains for high performance parts ,  Key Engineering Materials, Vol. 504-506, S. 151-156

Denkena, B.; Behrens, B.-A.; Charlin, F.; Dannenberg, M. (2012): Integrative process chain optimization using a Genetic Algorithm, Production Engineering - Research and Development, Springer-Verlag, Berlin Heidelberg, September 2011 (online first), Februar 2012 (printed), Vol. 6, Number 1, pp. 29-37

Paschke, H.; Weber, M.; Brauer, G.; Yilkiran, T.; Behrens, B.-A.; Brand, H. (2012): Optimized plasma nitriding processes for efficient wear reduction of forging dies,  Archives of Civil and Mechanical Engineering 12 S. 407-412, dx.doi.org/10.1016/j.acme2012.06.001

Pluemer, S.; Voges-Schwieger, K.; Denkena, B.; Behrens, B.-A. (2012): Development of an Advanced Micro-Positioning System for Increasing Operation Accuracy– Consideration of high pressure sealing,  Prod. Eng. Res. Devel., 2012, DOI 10.1007/s11740-012-0361-2

Weckenmann, A.; Reithmeier, E.; Behrens, B.-A.; Wartzack, S.; Akkasoglu, G.; Ohrt, C.; Salfeld, V.; Breitsprecher, T.; Plugge B.; Schneider, T. (2012): Methodengestüzte Referenzvorgehensweise für neue Umformverfahren,  Zeitschrift für wirtschaftlichen Fabrikbetrieb

Yilkiran, T.; Behrens, B.-A.; Paschke, H.; Weber, M.; Brand, H. (2012): The potential of plasma deposition techniques in the application field of forging processes, Archives of Civil and Mechanical Engineering 12 (2012), S. 284-291, dx.doi.org/10.1016/j.acme2012.06.002

Behrens, B.-A.; Bouguecha, A.; Krimm, R.; Matthias, T.; Salfeld, V. (2011): Characterization of Horizontal Loads in the Production of Asymmetrical Parts,  Journal “Key Engineering Materials”, Vol. 473, pp 223-228, Trans Tech Publications, Switzerland

Behrens, B.-A.; Bouguecha,A.; Hadifi T.; Mielke J. (2011): Advanced Friction Modeling for Bulk Metal Forming Processes. Production Engineering – Research and Development, Springer Verlag, Berlin, Vol. 5, Number 6 (2011), pp. 621-627

Behrens, B.-A.; Bräuer, G.; Paschke, H.; Bistron, M. (2011): Reduction of wear at hot forging dies by using coating systems containing boron, Production Engineering – Research and Development (doi: 10.1007/s11740-011-0308-z)

Behrens, B.-A.; El Nadi, T.; Krimm, R. (2011): Development of an analytical 3D-simulation model of the levelling process, Journal of Materials Processing Technology, Volume 211, Issue 6 (2011) pp. 1060 – 1068, ISSN 0924-0136

Behrens, B.-A.; Hübner, S.; Krimm, R.; Wager, C.; Vucetic, M.; Cahyono, T. (2011): Development of a Hydraulic Actuator to Superimpose Oscillation in Metal-Forming Presses; Journal "Key Engineering Materials", S.217-222, Vol. 473, Trans Tech Publications, Switzerland

Behrens, B.-A.; Kosch, K.-G. (2011): Development of the heating and forming strategy in compound forging of hybrid steel-aluminum parts,  Materials Science and Engineering Technology, Vol. 42, Nr. 11, S. 973-978

Behrens, B.-A.; Kosch, K.-G. (2011): Production of Strong Steel-Aluminum Composites by Formation of Intermetallic Phases in Compound Forging,  steel research international, Vol. 82, Nr. 11, S. 1261-1265, November 2011

Behrens, B.-A.; Kosch, K.-G. (2011): Influence of different alloying elements on the intermetallic phase seam thickness of compound forged steel-aluminum parts, Production Engineering - Research and Development, Vol. 5, S. 517–522

Behrens, B.-A.; Seidel, H.-J.; Lange, F.; Kammler, M. (2011): Vergleichende experimentelle und numerische Untersuchungen zum schwingungsüberlagerten Pressen zweier Pulvermaterialien,  Materialwissenschaft und Werkstofftechnik 2011, 42, No. 8, WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim, S. 705 - 711
DOI: 10.1002/mawe.201100757

Behrens, B.-A.; Vahed, N.; Gastan, E.; Lange, F. (2011): Experimental and Numerical Investigation on Manufacturing Methods of PM Components with Integrated Information Storage, Journal of Advanced Manufacturing Systems, vol. 10 (2011), no. 1, pp. 11-20, ISSN 0219-6867 (printed), ISSN 1793-6896 (online), World Scientific Publishing Co., Singapore, July 2011

Behrens, B.-A.; Yilkiran, T. (2011): Einfluss des Herstellverfahrens auf das Einsatzverhalten von Schmiedewerkzeugen ,  wt Werkstattstechnik online, Jahrgang 101, Heft 10/ 2011, S. 660-667, Springer-VDI-Verlag, Düsseldorf, Oktober 2011

Behrens,B.-A.; El Nadi, T.; Krimm, R. (2011): Automatisierung des Richtprozesses zum Minimieren der Blechkrümmung; wt Werkstattstechnik online, 10-2011, Seite 686-691, SPRINGER-VDI-VERLAG

Belski, A.; Gastan, E.; Vahed, N.; Klose, C.; Rodman, M.; Lange, F.; Wurz, M. C.; Bormann, D.; Rissing, L.; Behrens, B.-A.; Bach, Fr.-W. (2011): Process Principle for the Production of Sintered Dynamic Component-inherent Data Storage, Production Engineering - Research and Development, vol. 5 (2011), no. 3 pp. 233-240, ISSN 0944-6524 (printed), ISSN 1863-7353 (online), Springer-Verlag, Berlin Heidelberg, December 2010 (online first), May 2011 (printed/online)

Bistron, M.; Mayrhofer, P.; Paschke, H.; Stüber, M.; Ziebert, C. (2011): Composition, microstructure and mechanical properties of boron containing multilayer coatings for hot forming tools; Surface and Coatings Technology; (doi: 10.1016/j.surfcoat.2011.04.097)

Marchenko, M.; Behrens, B.-A.; Wrobel, G.; Scheffler, R.; Pleßow, M.: (2011): A New Method of Visualization and Documentation of Parametric Information of 3D CAD Models, Computer-Aided Design & Applications, 8(3), 2011, 435-448

Salfeld, V.; Krimm, R.; Matthias, T.; Behrens, B.-A. (2011): Investigation on the Process-Machine Interaction by Forming Parts with Sheet-Bulk Metal Forming,  Journal “Proceedings in Manufacturing Systems”, Vol. 6 / Issue 2, pp. 97-100, ISSN 2067-9238

Voges-Schwieger, K.; Hübner, S.; Behrens, B.-A. (2011): Adjustment of Design Limited Imperfections for Transportation Vehicles, The 14th International ESAFORM Conference on Material Forming, Queen’s University Belfast, Northern Ireland - United Kingdom, April 27-29, 2011, AIP Conf. Proc. 1353, pp. 1638-1643, doi: 10.1063/1.3589751, American Institute of Physics 978-0-7354-0911-8.

Voges-Schwieger, K; Hübner, S.;Behrens, B.-A. (2011): Low Temperature Sheet Forming, The 14th International ESAFORM Conference on Material Forming, Queen’s University Belfast, Northern Ireland - United Kingdom, April 27-29, 2011, AIP Conf. Proc. 1353, pp. 224-228, doi: 10.1063/1.3589519, American Institute of Physics 978-0-7354-0911-8.

Weckenmann, A.; Behrens, B.-A.; Reithmeier, E.; Akkasoglu, G.; Vucetic, M.; Ohrt, C.; Cahyono, T.; Hübner, S.; Kästner,M. (2011): "Appliance of the Maturity Method in the Development of Endoscopic Geometry Inspection for Sheet-Bulk Metal Forming Tools." Vol. 39, No.1, 2011, pp. 11-16, ISSN 2217-5776

Behrens, B.-A.; Bouguecha, A.; Götze, T. (2010): Consideration of Fundamental Influence Parameters for the Simulation of Sheet-Metal Forming Processes by means of Plastic Melt Pressure, Materials Science and Engineering Technology, Vol. 41, Heft 10, S. 839-843, 2010

Behrens, B.-A.; Denkena, B.; Charlin, F.; Dannenberg, M. (2010): Evolutionäre Optimierung einer Schmiedeprozesskette, wt Werkstattstechnik online, Jg. 100 (2010), H. 10, S. 798 – 803, Springer-VDI-Verlag, Düsseldorf.

Behrens, B.-A.; Dilger, K.; Wisner, G.; Rosenberger, J. (2010): Locally Reinforced Hydro Bonded Blanks. In: Journal for Technology of Plasticity, Vol. 35(2010), Number 1-2. S. 1-10. ISSN: 03543870

Behrens, B.-A.; El Nadi, T.; Krimm, R. (2010): Simulation einer Richtmaschine mit biegsamen Richtrollen; wt Werkstattstechnik online, 10-2010, Seite 812-816, SPRINGER-VDI-VERLAG.

Behrens, B.-A.; Gastan, E.; Vahed, N.; Lange, F. (2010): Numerical Analysis of the Process Chain for the Production of PM Components with Integrated Information Storage, Production Engineering - Research and Development, vol. 4 (2010), no. 5, pp. 477- 482, ISSN 0944-6524 (printed), ISSN 1863-7353 (online), Springer-Verlag, Berlin Heidelberg, June 2010 (online first), September 2010 (printed/online)

Behrens, B.-A.; Odening, D. (2010): Material Influence on Shrinkage Behaviour of Precision-Forged Parts, steel research international, Volume 81, Number 9, pp. 350-353, ISBN 978-3-514-00774-1, September 2010.

Behrens, B.-A.; Vahed, N.; Gastan, E. (2010): Application of tool vibration in die pressing of Ti-powder, Production Engineering: Volume 4, Issue 6 (2010), p. 545-551

Behrens, B.-A.; Voges-Schwieger, K,; Bouguecha, A.; Knigge, J.; Weilandt, K.; Hübner, S. (2010): Local Strain Hardening of Metal Components by Means of Martensite Generation, Advanced Materials Research Vol. 137, 2010, pp. 1-33, Trans Tech Publications, Switzerland, doi:10.4028/www.scientific.net/AMR.137.1

Lohse, H.; Marthiens, O.; Helduser, S.; Matthias, T.; Behrens, B.-A. (2010): Reglerauslegung für hydraulische Tiefziehpressen, Ölhydraulik und Pneumatik, 3/2010/März, S. 2-9, Vereinigte Fachverlage GmbH, Mainz, März 2010

Rosenberger, J.; Süße, D.; Hübner, S.; Ulbricht, V.; Behrens, B.-A. (2010): Draw bending of load-adapted sheet metal profiles, Key Engineering Materials Vol. 443, 06/2010, S.152-157, Trans Tech Publications, Switzerland; 9th Asia-Pacific Conference on Material Processing, Sydney, Australia, 7.-10.06.2010

Voges-Schwieger, K.; Hübner, S.; Behrens, B.-A. (2010): Additional forming elements for a local reinforcement in deep drawn parts, International Journal of Material Forming, Volume 3, Supplement 1, DOI 10.1007/s12289-010-0897-7, 2010, S. 825-828

Behrens, B.-A.; Bach, Fr.-W.; Denkena, B.; Möhwald, K.; Deißer, T. A.; Kramer, N.; Bistron, M. (2009): Manufacturing of Reinforced High Precision Forging Dies, Steel Research International, Vol. 80, S. 878 - 886, December 2009

Behrens, B.-A.; Denkena, B.; Charlin, F.; Dannenberg, M. (2009): Prozesskettenauslegung mittels genetischer Algorithmen, wt Werkstattstechnik online, Jg. 99 (2009), H. 10, S. 768 – 772, Springer-VDI-Verlag, Düsseldorf.

Behrens, B.-A.; Gatzen, H.-H.; Peshekhodov, I.; Pape, F. (2009): Investigation of the Mechanical Behavior of a PU-Based Coil-Coating System with the Help of Indentation and FE Analysis, Key engineering materials Issue 410-411/2009, pp. 217-224

Behrens, B.-A.; Javadi, M.; Krimm, R. (2009): Efficient control of metal-foming machines with an automated load and measurement device

Behrens, B.-A.; Nickel, R.; Müller, S. (2009): Flashless precision forging of a two-cylinder crankshaft, Production Engineering, Springer Verlag Berlin, vol. 3, no. 4 (2009), pp. 381-389

Behrens, B.-A.; Odening, D.; Müller, S.; Lücke, M. (2009): Process Design and Tooling Configuration for Precision Forging of High Performance Components, Steel Research International, Vol. 80, S.869-877, December 2009

Behrens, B.-A.; Pfeiffer, I. (2009): Massivumformung von Magnesiumlegierungen. Entwicklung eines Werkzeugsystems zum Schmieden mit überlagertem hydrostatischen Druck, wt Werkstattstechnik online * Band 99 (2009) Heft 10, Seite 747-752

Behrens, B.-A.; Weilandt, K.; Jocker, J.; Kamp, M. (2009): A Forming Process for the Increase of a’-Martensite Evolution under Elastic Strain, Production Engineering Research and Development WGP, Vol.3, No 1, p. 57-62, March 2009.

Elgaly, I.; Behrens, B.- A. (2009): Online Monitoring of Hot Die Forging Processes Using Acoustic Emission (Part-I), International Journal of Acoustic Emission, Vol. 26, Jan.- Dez. 2008

Helms, G.; Behrens, B.-A.; Stolorz, M.; Wefstaedt, P.; Nolte, I. (2009): Multi-body simulation of a canine hind limb: model development, experimental validation and calculation of ground reaction forces, BioMedical Engineering OnLine 8:36, 2009

Rosenberger, J.; Behrens, B.-A.; Hübner, S.; Süße, D.; Ulbricht, V. (2009): Flexible Draw Bending of Profiles, Key Engineering Materials Vols. 410-411 (2009) “Sheet Metal 2009”, pp. 565-570

Voges-Schwieger, K.; Behrens, B.-A. (2009): Development of a Thermomechanical Deep Drawing Tool for a Concerted Phase Transformation, Special issue of NETSU SHORI - Journal of the Japan Society for Heat Treatment, pp. 725-728, ISSN 0288-0490

Voges-Schwieger, K.; Behrens, B.-A.; Hübner, S. (2009): Enhancing Deep Drawing Processes by Using a Thermomechanical Tool Design, Key Engineering Materials Vols. 410-411 (2009) “Sheet Metal 2009”, pp. 595-600, online at http://www.scientific.net

Voges-Schwieger, K.; Hübner, S.; Behrens, B.-A. (2009): Verstärkung durch umformtechnische Strukturierung, wt Werkstatttechnik online, Jahrgang 99 (2009), Heft 10, S. 785 -790

Wu, K.-H.; Gastan, E.; Rodman, M.; Behrens, B.-A.; Bach, Fr.-W.; Gatzen, H.H. (2009): Development and application of magnetic magnesium for data storage in gentelligent products, Journal of Magnetism and Magnetic Materials, p. 1-3

Bach, F.-W.; Behrens, B.-A.; Plorin, T.; Voges-Schwieger, K.; Weilandt, K. (2008): Verstärkungskonzepte für Blech- und Strukturwerkstoffe, wt Werkstattstechnik online, Jahrgang 98 (2008), H. 10, S. 837-842, ISSN 1436-4980, Springer-VDI-Verlag, Düsseldorf, Oktober 2008

Behrens, B.-A.; Bach, F.-W.; Bräuer, G.; Möhwald, K.; Deißer, T. A.; Paschke, H.; Weber, M.; Bistron, M. (2008): Steigerung des Verschleißwiderstandes von Schmiedewerkzeugen - Verschleißreduzierung an Präzisionsschmiedegesenken durch borhaltige PACVD-Beschichtungen, wt Werkstattstechnik online, Jahrgang 98 (2008), H. 10, S. 805-812, ISSN 1436-4980, Springer-VDI-Verlag, Düsseldorf, Oktober 2008

Behrens, B.-A.; Bistron, M.; Küper, A. (2008): Investigation of load adapted gears and shafts manufactured by compound-forging; Journal of Advanced Manufacturing Systems, Vol. 7, No. 1 (2008) 175–182, Print ISSN: 0219-6867

Behrens, B.-A.; Hagen, T.; Mielke, J.; Sidhu, K. B. (2008): Production of structure components with selective properties by means of action media based cold forming; Steel Research International, Vol. 79 (2008) No. 3, pp. 233-239, Verlag Stahleisen GmbH, 2008

Behrens, B.-A.; Hübner, S.; Knigge, J.; Voges-Schwieger, K.; Weilandt, K. (2008): Local strain-hardening in sheet metal and forging components, Process metallurgy/Metal working/Materials technology, steel research int., Vol. 79 (2008), No. 3, pp. 165-171

Behrens, B.-A.; Javadi, M. (2008): Automatische Belastungs- und Vermessungseinrichtung, wt Werkstattstechnik online, Jahrgang 98 (2008), H. 7/8, S. 545-548, Springer-VDI-Verlag, Düsseldorf, 2008

Behrens, B.-A.; Javadi, M.; Heimann, B.; Dagen, M. (2008): Scherschneiden mit elektromagnetischem Stanzautomat, wt Werkstattstechnik online, Jg. 98 (2008), H. 10, S. 825 - 830, Springer-VDI-Verlag, Düsseldorf, 2008

Behrens, B.-A.; Lange, F.; Gastan, E. (2008): Plagiatschutz sicherheitsrelevanter Sinterbauteile - Verfahrensprinzip und Betrachtung erreichbarer Bauteilfestigkeiten und Risssicherheiten, wt Werkstattstechnik online, Jahrgang 98 (2008), H. 10, S. 880-884, ISSN 1436-4980, Springer-VDI-Verlag, Düsseldorf, Oktober 2008

Behrens, B.-A.; Lange, F.; Gastan, E. (2008): Experimental and numerical analysis of a marking approach for sintered light alloy components, Powder Metallurgy, (2008) vol. 51, no. 3, p. 277-282, ISSN 0032-5899 (printed), ISSN 1743-2901 (online), Maney Publishing, Leeds (United Kingdom), September 2008

Behrens, B.-A.; Lau, P. (2008): Key Performance Indicators for Sheet Metal Forming Processes, Production Engineering, Springer Verlag Berlin, 2. Jg. (2008), H. 1, S. 73-78

Behrens, B.-A.; Schäfer, F. (2008): Vorhersage des Werkzeugversagens durch Materialermüdung in der Warmmassivumformung - Lebensdauerberechnung unter Berücksichtigung prozessspezifischer Werkstoffkennwerte, wt Werkstattstechnik online, Jahrgang 98 (2008), H. 10, S. 796-800, ISSN 1436-4980, Springer-VDI-Verlag, Düsseldorf, Oktober 2008

Behrens, B.-A.; Suchmann, P.; Schott, A. (2008): Warm Forging: new forming sequence for the manufacturing of long flat pieces, Production Engineering, Springer Verlag Berlin, 2. Jg. (2008), H. 2, Nr. 3, S. 261-268

Behrens, B.-A.; Windhagen, H.; Wirth, C. J.; Nolte, I.; Bouguecha A. (2008): Numerical Investigations of Stress Shielding in Total Hip Prostheses, Proceedings of the Institution of Mechanical Engineers, Part H, Journal of Engineering in Medicine, 222 (H5), pp. 593-600

Besdo, D.; Besdo, S.; Behrens, B.-A.; Bouguecha, A. (2008): Problems with ultrasonic measurements of shear modules of structured media, Acta Biomater 3(5), 2007, pp. 723-33

Dorsch, N. S.; Peshekhodov, I.; Spies, P.; Schneider, G. A. (2008): Fracture resistance evaluation of RuO2-based thick film resistor material by in situ crack extension observation in a scanning electron microscope, ISSN 1359-6454, Acta Materialia, Volume 56, Issue 18, October 2008, pp. 5027-5033

Helms, G.; Wefstaedt, P.; Rittmann, P.; Windhagen, H.; Pressel, T.; Behrens, B.-A.; Nolte, I. (2008): Viskosität von Synovialflüssigkeiten aus dem caninen Ellenbogen- und Hüftgelenk sowie dem humanen Kniegelenk, Berliner und Münchener Tierärztliche Wochenschrift, September/Oktober 2008

Behrens, B.-A.; Ahrens, M. (2007): Determination of the load on profiled roller guide rails used as ram guides for metal-forming, Production Engineering, Research and Development, August 2007, pages 45 - 50

Behrens, B.-A.; Brecher, C.; Hork, M.; Werbs, M. (2007): "New standardized procedure of the measurement of the static and dynamic properties of forming", Production Engineering, Research and Development, August 2007, pages 31 - 36

Behrens, B.-A.; Doege, E.; Reinsch, S.; Telkamp, K.; Daehndel, H.; Specker, A. (2007): Precision forging processes for high-duty automotive components. Journal of Materials Processing Technology, 04, 2007

Behrens, B.-A.; Gastan, E.; Lange, F. (2007): Experimentelle und numerische Untersuchungen zur Kennzeichnung von Sinterteilen mittels gezielt eingebrachter Fremdpartikel - Experimental und numerical investigation on the marking of sintered parts by the targeted application of particles, Materialwissenschaft und Werkstofftechnik - Materials Science and Engineering Technology, Band 38, 10/2007, S. 816-820, ISSN 0933-5137 (gedruckt), ISSN 1521-4052 (online), WILEY-VCH Verlag, Weinheim, Oktober 2007

Behrens, B.-A.; Hübner, S.; Sunderkötter, C.; Knigge, J.; Weilandt, K.; Voges-Schwieger, K. (2007): Local Strain Hardening of Sheet and Solid Forming Components during Formation of Martensite in Metastable Austenitic Steels, Advanced Materials Research Vol. 22 (2007) pp. 5-15, online at http://www.scientific.net Weitere Informationen

Behrens, B.-A.; Kammler, M. (2007): Calculation of the Bursting Speed of One Side Recessed Grinding Wheels, Production Engineering Research and Devel-opment, 2007, Vol. 1

Behrens, B.-A.; Krimm, R. (2007): Geregeltes Richten; wt Werkstattstechnik online, Jahrg. 97 (2007) H.3, S. 143-149 Weitere Informationen

Behrens, B.-A.; Küper, A. (2007): Investigation of deviations of the lock-position of dies due to unsteady thermal conditions; Journal of Materials Processing Technology; 187 - 188 (2007), pp. 6 - 9, ISSN 0924 - 0136.

Behrens, B.-A.; Olle, P. (2007): Consideration of Phase Transformations in Numerical Simulation of Press Hardening; steel research, 78 (2007) No. 10-11, p. 784-790, DOI: 10.2374/SRI07SP067-78-2007-784

Behrens, B.-A.; Schaeper, E.-F.; Kamp, M. (2007): Oscillation overlaid shearing of sheet, Production Engineering, Research and Development, August 2007, pages 19 - 24

Behrens, B.-A.; Wilde, I.; Hoffmann, M. (2007): Complaint management using the extended 8D-method along the automotive supply chain, In: Production Engineering - Research and Development, Vol. XIV/1, Berlin u.a.: Springer, 2007

Behrens, B.-A.; Czechowski, D.; Röper, M.; Telkamp, K. (2006): Improved Empirical Model to Determine the Leidenfrost - Temperature for Spray Cooling of Forging Tools, WGP: Production Engineering, Carl Hanser Verlag, vol. 13 (2006), no. 1, pp. 215-218

Behrens, B.-A.; Doege, E. ; Krimm, R. (2006): Shortening Tool Setting Time for Transfer Presses Journal of Engineering Manufacture, Proceedings of the Institution of Mechanical Engineers Part B (Professional Engineering Publishing), Vol. 220, Nr. 4/2006 pages 533-539, ISSN 0954-4054, auch online über: www.pepublishing.com

Behrens, B.-A.; Doege, E.; Reinsch, S.; Telkamp, K.; Dähndel, H.; Specker, A. (2006): Precision Forging Processes for High-Duty Automotive Components, Journal of Materials Processing Technology, Elsevier Science, vol. 185 (2006), no. 1-3, pp. 139-146

Behrens, B.-A.; Helms, G. ; Pösse, O. (2006): „FE-Simulation zur Lokalisierung hoch beanspruchter Bereiche in der Hüftpfanne von Endoprothesen“ Biomedizinische Technik, Dez 2006

Behrens, B.-A.; Nolte, I. ; Bouguecha, A. (2006): „Ermittlung der elastischen Eigenschaften der Kompakta im Femur des Hundes“ Deutsche Tierärztliche Wochenschrift, Heft 1, 2006

Behrens, B.-A.; Nolte, I. ; Bouguecha, A. (2006): „Ermittlung des E-Moduls der Kompakta im caninen Femurknochen“ Dtsch. Tierärztl. Wschr. 113, 1-40, Heft 1, 2006.

Behrens, B.-A.; Nolte, I.; Bouguecha, A.; Helms, G.; Gerkhardt, E.; Meyer-Lindenberg, A (2006): Ermittlung der elastischen Eigenschaften der Kompakta im Femur des Hundes, Deutsche Tierärztliche Wochenschrift, Heft 1, S. 24 - 27, 2006

Behrens, B.-A.; Schmidt, I. (2006): Improving the Properties of Forged Magnesium Parts by Optimized Process Parameters Zeitschriftenaufsatz: Special Issue of Journal of Materials Processing

Behrens, B.-A.; Wienströer, M. ; Conrads, H. (2006): Design Integrated Process Modelling of Forging Sequences via Backward Simulation WGP Annalen (XIII/2), S.157

Hermann, K.; Patkovszky, I. ; Behrens, B.-A. (2006): Anwendung dynamischer Kräfte in der Werkstoffprüfung tm - Technisches Messen 73(2006), Heft 12

Herrmann, K.; Patkovszky, I.; Behrens, B.-A.; Kammler, M. (2006): Anwendung dynamischer Kräfte in der Werkstoffprüfung - Application of Dynamic Forces in Materials Testing, tm Technisches Messen, 12/2006, S.646-654, ISSN 0171-8096, Oldenbourg Verlag, München, Dezember 2006

Kammler, M. (2006): Untersuchungen zur Bestimmung der Biegebruchfestigkeit gebundener Schleifmittel Materialwissenschaft und Werkstofftechnik 2006, 37, No. 5

Behrens, B.-A.; Bouguecha, A. ; Nolte, I. (2005): Mechanical properties of femoral trabecular bone in dogs BioMedical Engineering OnLine 2005, 4:17 (17 March 2005)

Behrens, B.-A.; Kammler, M. (2005): Numerical and experimental analysis of the breaking behaviour of vitrified bonded grinding wheels cfi – Berichte der deutschen keramischen Gesellschaft, 2005, Vol. 82, No.11

Behrens, B.-A.; Kammler, M.; Nolte, I.; Bougecha, A.; Halbritter, U.;Besdo, S.; Meyer-Lindenberg, A. (2005): Ermittlung der elastischen Eigenschaften der Spongiosa im Femurkopf des Hundes, Berliner und Münchener Tierärztliche Wochenschrift, 118. Jahrgang (3-4), 2005

Behrens, B.-A.; Klawitter, G. ; Hoffmann, M. (2005): A Die-Circulatory Variation of the Flash Land Can Rise Economic Efficiency of Drop Forging WGP e.V., Braunschweig, Annals of the German Academic Society for Production Engineering, Production Engineering Research Development, XII/2, (2005), Volume XII, Issue 2; pages 65 – 68

Behrens, B.-A.; Krimm, R. (2005): Shortening the Tool Setting Time on Transfer Presses by Prediction of the Machines Deflection, WGP e.V. Annals of the German Academic Society for Production Engineering, Production Engineering Research and Development, Volume XII, Issue 2, pages 191 - 196, ISBN 3-9807670-7-8 Oktober 2005

Behrens, B.-A.; Nolte, I. ; Bouguecha, A. (2005): Ermittlung der elastischen Eigenschaften der Spongiosa im Femurkopf des Hundes Berliner und Münchener Tierärztliche Wochenschrift, 118. Jahrgang (3-4), 2005, S. 160-163

Behrens, B.-A.; Reinsch, S.; Telkamp, K.; Specker, A. (2005): Advancement in Precision Forging Technologies, Production Engineering: Research and Development, WGP, vol. 12 (2005), no. 1, pp. 31-34

Behrens, B.-A.; Schäfer, F. (2005): Berechnung des Werkzeugverschleißes beim Schmieden wt Werkstattstechnik online, Jahrgang 95 (2005) H. 10, S. 765-770

Behrens, B.-A.; Schäfer, F. (2005): Prediction of wear in hot forging tools by means of Finite-Element Analysis Journal of Materials Processing Technology, Ausgabe 167 2005, Elsevier Verlag, S. 309 - 315

Behrens, B.-A.; Doege, E. ; Springub, B. (2004): Transformation induced martensite evolution in metal forming processes of stainless steels; steel research int. 75, 7/2004

Behrens, B.-A.; Fischer, D.; Meiners, F. (2004): Research into the Forging of Aluminium Alloy AA 7075 by Means of Superimposed Hydrostatic Pressure, Production Engineering, Heft XI/2 2004

Behrens, B.-A.; Haller, B.; Fischer, D. (2004): Thixoforging of steel using ceramic tool materials, Steel Research Int. 75 (2004) No. 8/9, pp. 561-568

Behrens, B.-A.; Huskic, A.; Hornhardt, Ch. (2004): Neue Werkzeugkonzepte für das Präzisionsschmieden von Zahnrädern, Werkstatttechnik, Oktober 2004

Bach, F.-W.; Doege, E. ; Kutlu, I. (2003): Improving the life cycle of forging dies with active brazed ceramic inserts Material Science and Product Technology, Vol. 19 No. 5, 2003, May 2003

Doege, E.; Hanini, K. ; Schmidt-Jürgensen, R. (2003): Numerische und experimentelle Untersuchungen zum Pulverpressen von Aluminium Materialwissenschaft und Werkstofftechnik, Wiley-VCH Verlag, Vol. 34/8, 2003, S. 729-735

Doege, E.; Hustedt, P. ; Altmann, H.-C. (2003): Precision Forging of Crankshafts WGP-Annalen, Sept.2003

Doege, E.; Schmidt-Jürgensen, R. ; Huinink, S. (2003): Development of an optical sensor for the measurement of the material flow in deep drawing process Annals of the CIRP Vol.52/1/2003. pp. 225-228

Bach, Fr.-W.; Doege, E. ; Kutlu, I. (2002): Aktivlöten von keramischen Segmenten für den Einsatz in verschleißkritischen Bereichen von Schmiedegesenken, Materialwissenschaft und Werkstofftechnik, Heft 11, November 2002

Doege, E.; Palkowski, H. ; Zenner, H. (2002): Einfluss elastischer Kennwerte auf die Eigenschaften von Blechformteilen Materialwissenschaft und Wekstofftechnik

Doege, E.; Bagaviev, A.; Hanini, K. (2001): FEM Simulation der Prozessschritte Pulverpressen/ Sintern, Materialwissenschaft und Werkstofftechnik, Vol. 32 (1), 2001, S. 57-61

Doege, E.; Dröder, K. (2001): Sheet metal forming of magnesium wrought alloys - formability and process technology, Journal of Materials Processing Technology 115 (2001), p. 14-19

Doege, E.; Elend, L.-E. (2001): Design and application of pliable blank holder systems for the optimization of process conditions in sheet metal forming, Journal of materials processing technology 111 (2001), Seite. 182-187

Doege, E.; Kurz, G. (2001): Development of a Formulation to Describe the Work Softening Behaviour of Magnesium Sheets for Heated Deep Drawing Processes, Annals of the CIRP Vol. 50/1/2001, p. 177-180

Doege, E.; Meinen, J. ; Neumaier, T. (2001): Numerical design of a new forging press drive incorporating non-circular gears. Proceedings - Institution of Mechanical Engineers Part B Journal of Engineering Manufacture 2001, vol. 215, no. 4, pp. 465-472

Schneider, H.; Rüsch, S. (2001): Process-integrated quality monitoring and control in closed die forging. International Journal of Manufacturing Technology and Management (IJMTM), Vol. I, No.1, 2001

Doege, E.; Meinen, J. (2000): Specific features of FE-Meshes for the Analysis of metal forming processes, Engineering Research, Springer-VDI-Verlag, 66 (2000), Nr. 1, pp. 40-48

Doege, E.; Dittmann, J. ; Neumaier, T. (1999): FEM-Simulation of Phase Transformations for Steel in Metalforming with integrated Heat-treatment. Advanced Engineering Materials 2000, 2, No.7, pp: 434-437

Doege, E.; Hindersmann, M. (1999): Development of non-circular gears for use in mechanical presses. Production Engineering, Erlangen-Nürnberg, Band 6 (1999) Heft 1, S. 79-82

Doege, E.; Ropers, C. (1999): Berechnung der Wärmeleitung in dreidimensional geformten Blechen während eines Blechumformprozesses Forschung im Ingenieurwesen 65 (1999) 7, S. 169-177

Othmani, A.; Kaminsky, C. (1999): Image analysis of sheet metal surfaces, Journal of Materials science 32 (1999) 5139-5142

Doege, E.; Kösters, R. (1998): Adaptiver 3D-Vernetzungsalgorithmus zur FEM-Analyse von Massivumformvorgängen (Adaptive 3D-Meshing algorithm for the FEM-Analysis of metal forming processes), Forschung im Ingenieurwesen, 64 (1998), Nr. 4/5 August, pp. 121-128 [in German]

Doege, E.; Neubauer, I. ; Bohnsack, R. (1998): Influence of friction on the material flow during precision forging of helical gears. Steel Research 69 (1998), Nr. 4/5 , pp. 165-169

Rotarescu, M.-I. (1998): Description of the contact between a deterministic anisotropic tool surface and a workpiece subjected to plastic deformation. Proc. Instn. Mech. Engrs. Vol. 212 part B (1998), pp. 403-409

Bagaviev, A. (1997): Ein Beitrag zur analytischen Beschreibung des Pulverpressens (A contribution to the analytical description of the powder compacting), Zeitschrift fuer angewandte Mathematik und Mechanik, Vol. 77 (1997) No.°5, pp. 71-75 [in German]

Doege, E.; Bagaviev, A (1997): Formability analysis based on the anisotropically extended Gurson's model, in: Advanced methods in Materials Processing Defects, ed. M. Predeleanu and P. Gilormini, Elsevier, Amsterdam, 1997, pp. 281-288

Matuschek, N.; Kartner, F.-X. ; Keller, U. (1997): Exact coupled-mode theories for multilayer interference coatings with arbitrary strong index modulations. Exakte Theorie der gekoppelten Wellenmoden für mehrschichtige Interferenzfilter mit Brechungsindexgradienten. IEEE Journal of Quantum Electronics, Band 33 (1997) Heft 3, S. 295-302

Doege, E.; Ulrich, L. (1996): Process regulation and monitoring when blanking micro-components. Production Engineering, München, Band 3 (1996) Heft 2, Seite 15-18

Doege, E.; El-Dsoki, T.; Seibert, D. (1995): Prediction of necking and wrinkling in sheet-metal forming, Journal of Materials Processing Technology 50 (1995), pp. 197-206

Doege, E.; Rotarescu, M.-I.; Lübbe, A. (1995): Hohlkörper-Kugeldrückwalzen verändert Stahleigenschaften, Drückwalzen, Beziehung schwischen Mikrohärte, Eigenspannungen und Umformgrad, Bänder Bleche Rohre 9-1995, S. 24-30

Rotarescu, M.I. (1995): A theoretical analysis of tube spinning using balls, Journal of Materials Processing Technology 54 (1995), pp. 224-229

Doege, E.; Brendel, T. (1994): Diagnosis of metal-forming machines to increase availability. Production Engineering, München, Band 2 (1994) Heft 1, S. 109-112

Doege, E.; Repenning, F. (1994): Geometry registration of hot forged parts by means of laser triangulation. Production Engineering, München, Band 2 (1994) Heft 1, S. 215-220

Doege, E.; Schomaker, K.-H. (1994): Diagnostic system for punching presses. Production Engineering, München, Band 1 (1994) Heft 2, S. 221-224

Huskic, A.; Kazhai, M.; Behrens, B.-A. (2015): Process-integrated heat treatment of hot forged components,  Tekkaya, A. E.; Homberg, W.; Brosius, A. (Herausgeber): 60 Excellent Inventions in Metal Forming, Springer Verlag, 2015, S. 421-425

Behrens, B.-A.; Bouguecha, A.; Krimm, R.; Matthias, T.; Czora,M. (2013): Consideration of the Machine Influence on Multistage Sheet Metal Forming Processes” in “Process Machine Interactions: Predicition and Manipulation of Interactions between Manufacturing Processes and Machine Tool Structures,  Berend Denkena and Ferdinand Hollmann (Eds.); Springer-Verlag Berlin Heidelberg, 2013

Behrens, B.-A.; Bouguecha, A.; Sidhu, K. B.; Matthias, T.; Peshekhodov, I. (2011): New strategies in finite element analysis of material processing; Lecture Notes in Applied and Computational Mechanics 57: Modelling, Simulation and Software Concepts for Scientific-Technological Problems, 2011, pp. 117-131, ISBN 978-3-642-20489-0

Behrens, B.-A.; Hagen, T.; Klassen, A.; Knigge, J.; Mielke, J.; Pfeiffer, I. (2010): Forging of Aluminium Components under a Superimposed Hydrostatic Pressure to Induce Local Strain Hardening, Advanced Materials Research Vol. 137 (2010) pp 191-217, 2010 Trans Tech Publications, Switzerland, doi:10.4028/www.scientific.net/AMR.137.191

Behrens, B.-A.; Hagen, T.; Röhr, S.; Sidhu, K.-B. (2007): Selective Strain Hardening of Structure Components by Action Media Based Cold Massive Forming, Advanced material Research, Vol. 22, 2007, pp. 57-65, Trans Tech Publications, Switzerland, 2007, ISBN 0-87849-455-3, online at http://www.scientific.net

Doege, E.; Behrens, B.-A.; Kurz, G.; Vogt, O. (2006): Forming of Magnesium Alloys, ASM Handbook Volume 14B Metalworking: Sheet Forming, S. 625-639, ISBN-10: 0-87170-710-1, September 2006

Behrens, B.-A. (2004): Cold Sizing of Cold- and Hot-Formed Gears. CIRP ANNALS 2004, Manufacturing Technology, Volume 53/1, pages 239 - 242, ISBN 3-905 277-41-7, 2004

Bernd-Arno Behrens (Hrsg.) (2017): Innovationspotenziale in der Umformtechnik 22. Umformtechnisches Kolloquium Hannover, 15. und 16. März 2017
ISBN: 978-3-95900-122-9

Doege, E.; Behrens, B.-A. (2010): Handbuch Umformtechnik, 2. Aufl., Springer Verlag Berlin Heidelberg New York, 2010

Behrens, B.-A.; Bouguecha, A.; Hundertmarkt, A.; Marthiens, O.; Schäfer, F.; Vofes-Schwieger, K.; Weilandt, K. (2008): Aktuelle Forschungsergebnisse am Institut für Umformtechnik und Umformmaschinen, Umformtechnik - Ein Wirschaftszweig mit Potential, 19. Umformtechnisches Kolloquium Hannover 2008

Marchenko, M. (2008): Radial-Axial-Ringwalzen, Dynamische 3D-Visualisierung eines Radial-Axial-Ringwalzprozesses, VDM-Online, ISBN 978-3-639-05182-7, VDM Verlag Dr. Müller, November 2008 Weitere Informationen

Doege, E.; Behrens, B.-A. (2007): Handbuch Umformtechnik, 1. Aufl., Springer Verlag Berlin Heidelberg New York, 2007

Doege, E.; Silbernagel, C.; Dähndel, H. (2003): Innovative Ansätze in der Massivumformung als Marktchance, in: Reinhart, G.; Zäh, M. F. (Hrsg.): Marktchancen Individualisierung, Springer-Verlag

Behrens, B.-A.; Puchert, A. (2002): Zukunftorientierte Forschung am Institut für Umformtechnik und Umformmaschinen, Umformtechnik - Zukunfttechnologie mit Tradition, 18. Umformtechnisches Kolloquium Hannover 2005

Juchmann, P.; Wolff, S.; Kurz, G. (2002): Magnesiumblech - Werkstoffalternative für den Ultraleichtbau, Umformtechnik - Erschließung wirtschaftliche, und technologischer Potenziale, 17. Umformtechnisches Kolloquium 2002

Polley, W.; Barth, A.; Meiners, F. (2002): Leichtbaukonzepte in der Automobilindustrie und deren Umsetzung in Prozessketten der Umformtechnik, Umformtechnik - Erschließung wirtschaftlicher und technologischer Potenziale, 17. Umformtechnische Kolloquium 2002

Schaprian, M.; Derenthal, M.; Menz, R.; Zacharov, A.; Elend, L.-E.; Hübner, S.; Barnert, L.; Huskic, A.; Abdelfattah, S. (2002): Praxisnahe Entwicklungen am IFUM - mittelfristig umsetzbar; 17. Umformtechnisches Kolloquium Hannover 2002

Doege, E.; Ropers, C. (1999): Berechnung der Wärmeleitung in dreidimensional geformten Blechen mit der Finite-Differenzen-Methode während eines Umformprozesses, Forschung im Ingenieurswesen 65 (1999), S. 169-177

Doege, E.; Meinen, J. (1998): Adaptiver 3D-Vernetzungsalgorithmus zur FEM-Analyse von Massivumformvorgängen, Forschung im Ingenieurwesen 65 (1998), S. 121-128, Springer-Verlag

Doege, E.; Bagaviev, A.; Dohrmann, H. (1997): Application of an anisotropic extension of gurson model to practical engineering problems, Computational Plasticity, 1997, pp. 1454-1458

Doege, E.; Bagaviev, A.; Dohrmann, H. (1997): Formability analysis based on the anisotropically extended Gurson model, Advanced Methods in Materials Processing Defects 1997, pp. 281-289

Harsch, E.; Neumann, C.-P.; Hinndersmann, M. (1996): Pressen auf dem Weg zur Prozeßreglung, 15. Umformtechnisches Kolloquium 1996

Mathieu, H.; Michael, M. (1996): Ein alternatives Simulationsverfahren für die Massivumformung, 15. Umformtechnisches Kolloquium Hannover 1996

Besdo, D.; Doege, E.; Kösters, R.; Viola, S. (1995): Simulation von Blechumformvorgängen mit der Methode der Finiten Elemente, S. 195-225

Behrens, B.-A.; Yarcu, D.; Kazhai, M.; Relge, R. (2018): IPROM – Innovative Prozesskette zur Massivteilfertigung,  Denkena, B. (Hrsg.): Berichte aus dem IFW, TEWISS Verlag, S. 28-33, S. 41-52, S. 54-62, S. 114-117
ISBN: 978-3-95900-199-1

Behrens, B.-A.; Bonhage, M.; Malik, I. Y. (2017): Data storage and component labeling within bulk material by sintering,  Cyber-Physical and Gentelligent Systems in Manufacturing and Life Cycle, 1. Ausgabe, Elsevier Fachverlag, S. 100 - 107. ISBN: 978-0-12-811939-6
ISBN: 978-0-12-811939-6

Behrens, B.-A.; Bonhage, M.; Malik, I. Y.; Bonk, C. (2017): Tempering control of forging processes by integration of cavities,  Cyber-Physical and Gentelligent Systems in Manufacturing and Life Cycle, 1. Ausgabe, Elsevier Fachverlag, S. 378 - 398. ISBN: 978-0-12-811939-6
ISBN: 978-0-12-811939-6

Wolf, L.; Diekamp, M.; Gretzki, T.; Nürnberger, F.; Bach, F.-W.; Rodman, D.; Moritz, J.; Schrödter, J.; Hübner, S.; Behrens, B. -A (2014): Hot Stamping and subsequent spray cooling: A new manufacturing approach,  Prof. O. N. Golovko, Plastic Deformation of Metals, 2014, Akzent PP, Dnipropetrovsk, S. 36-55
ISBN: 978-617-7109-18-0

B.-A. Behrens, A. Bouguecha, I. Peshekhodov (2013): Numerische Untersuchungen zum Scherschneiden von Feinblechen aus Dualphasenstählen mithilfe der Finite-Elemente-Methode,  Jahresbericht des Clustersystems 2012 der Leibniz Universität IT Services, S. 170-171
ISBN: 978-3-9814539-2-8

Behrens, B.-A.; Pfeiffer,I.; Knigge, J. (2012): Advances in Wrought Magnesium Alloys: Properties, Processing and Applications,  Colleen Bettles, Verlag: Crc Press

Kammler, M.; Hadifi, T.; Nowak, M.; Bouguecha, A. (2012): Experimental and Numerical Investigations on Metal Flow during Direct Extrusion of EN AW-6082,  Key Engineering Materials (Volume 491), Progress in Extrusion Technology and Simulation of Light Metal Alloys, Trans Tech Publications, Switzerland, pp. 137 - 144
DOI: 10.4028/www.scientific.net/KEM.491.137

Behrens, B.-A.; Kammler, M.; Olle, P.; Weilandt, K.; Peshekhodov, I.; Rudskoy, A.; Kolbasnikov, N.; Naumov, A. (2010): Finite element analysis of phase transformation in hot stamping and deep drawing of advanced steels. 25th anniversary of cooperation, St. Petersburg- Hannover, 2010, pp 26-36

Kammler, M. (2010): Localization of the Shear Zone in Extrusion Processes by means of Finite Element Analysis, Key Engineering Materials Vol. 424 (2010), pp 221 - 226.

Bausch, T. und 10 Mitautoren (2009): Innovative Zahnradfertigung. Verfahren, Maschinen und Werkzeuge zur kostengünstigen Herstellung von Stirnrädern mit hoher Qualität. 4., aktualisierte Auflage, Renningen: expert 2009 (Kontakt & Studium, Bd. 175), Abschn. 5.4.6, S. 131 - 136 u. S. 166 f. ISBN 978-3-8169-2908-6

Behrens, B.-A.; Höber, A. (2022): Moderne Pressenantriebe – Entwicklungen am IFUM,  23. Dresdner Werkzeugmaschinen-Fachseminar, 04.-05. Juli 2022, Dresden.

Grajczak, J.; Nowroth, C.; Twiefel, J.; Wallaschek, J.; Nothdurft, S.; Hermsdorf, J. Wesling, V.; Kaierle, S. (2021): Investigations on the weld seam geometry of ultrasonic assisted laser beam welded round bars in and beside antinode position,  Lasers in Manufacturing (LiM)
DOI: 2021-proceedings/joining-welding-and-brazing

Behrens, B.-A.; Kazhai, M.; Yarcu, D. (2016): Einsatz von aluminiumlegierten UHC-Leichtbaustählen als neuer Werkstoff in der Automobilindustrie,  16. Werkstoff- & Leichtbau-Forum, Thementag: Keramiken/Hochleistungs-Stahlwerkstoffe, Hannover

Behrens, B.-A.; Kazhai, M.; Huskic, A. (2015): Untersuchungen zur kontrollierten Wärmebehandlung von Stahlschmiedebauteilen aus der Schmiedewärme,  15. Werkstoff-Forum, 13.-17.04.2015, Hannover

Behrens, B.-A.; Spiekermeier, A. (2015): Rohrprofilpresshärten mit zusätzlicher Innenabkühlung mittels Wasser-Luft-Spraykühlung,  15. Werkstoff-Forum, 13-17.04.2015, Hannover

(2013): Investigation of Surface Topography Evolution of Sheet Aluminum Under Tension and Under Pressure,  Computational Plasticity XII – Fundamentals and Applications (COMPLAS 2013), Barcelona, Spanien, 03.-05.09.2013

(2013): Investigation of Surface Topography Evolution of Aluminum Sheets Under Deep Drawing Conditions,  Workshop Oberndorf, Österreich, 18.-22.02.2013

(2013): Investigation of Surface Topography Evolution of Sheet Aluminum Under Tension and Pressure ,  Annual Workshop, Hannover, Deutschland, 30.09.-02.10.2013

(2012): (Topography) Evolution of IRTG 1627 - Comparison between Surface Evolution during Deep Drawing of Aluminum and the Evolution of the IRTG 1627,  Workshop Wangerooge, Deutschland, 20.-22.09.2012

(2012): Numerical modeling of deep drawing processes and its validation”, IRTG‐Workshop “From tensile test over material model to application,  Mehring, Deutschland, 09.-13.07.2012

(2012): Investigation of Surface Grains Evolution During Deep Drawing of Aluminum,  The Materials Science & Technology 2012 Conference and Exhibition proceedings, Pittsburgh, Pennsylvania, 07.-11.10.2012

(2011): Numerical Investigations on the Influence of Contact Conditions on the Topography of Sheet Metal Surface in Deep Drawing,  Workshop St. Anton, Österreich, 12.-16.12.2011

(2011): Multiskalenbetrachtung zur Entwicklung eines Reibansatzes für die numerische Abbildung von Blechumformprozessen,  MUSIC Beiratssitzung, Hannover, Deutschland, 02.05.2011

(2011): Multiskalenbetrachtung zur Entwicklung eines Reibansatzes für die numerische Abbildung von Blechumformprozessen,  Seminar IRTG 1627, Hannover, Deutschland, 15.07.2011

Behrens, B.-A.; Götze, T. (2009): Abbildung eines wirkmedienbasierten Blechumformprozesses, In: Kolloquium Graduiertenkolleg 1378/1 – Herstellung, Bearbeitung und Qualifizierung hybrider Werkstoffsysteme, ISBN 978-3-941416-14-7, S. 19-24, 2009

Behrens, B.-A.; Haller, B. ; Desery, C. (2005): Thixoformingtechnologie für hochschmelzende Stahlwerkstoffe Abschlussbericht Forschung für die Produktion von morgen, Hrsg. Bernd-Arno Behrens, PZH Produktionstechnisches Zentrum GmbH, Garbsen 2004

Doege, E.; Dittmann, J.; Hütte, H.; Menz, R.; Rüsch, S.; Schprian, M. (2000): Innovative Entwicklungen in der Umformtechnik- Maschinen- und Verfahrensvarianten zur Sicherung hoher Genauigkeit in verkürzten Prozessen, 16. Umformtechnisches Kolloquium Hannover

Doege, E.; Kröff, A.; Dittmann, J.; Kaminsky, Ch. (2000): Lösung besonderer Problemstellungen in der Umformtechnik mit Hilfe der FEM Simulation, Umformtechnik an der Schwelle zum nächsten Jahrtausend, Umformtechnisches Kolloquium Hannover, 16 (1999) S. 307-330

Althaus, P.; Weichenhain, J.; Hübner, S.; Wester, H.; Rosenbusch, D.; Behrens B.-A. (2023): Numerical and experimental failure analysis of deep drawing with additional force transmission,  Production at the Leading Edge of Technology, Proceedings of the 12th Congress of the German Academic Association for Production Technology (WGP), University of Stuttgart, October 2022
DOI: 10.1007/978-3-031-18318-8

Behrens, B.-A.; Rosenbusch, D.; Wester, H.; Weichenhain, J.; Althaus, P. (2023): Numerical analyses of the influence of a counter punch during deep drawing
DOI: 10.21741/9781644902417-41

Ganter, N. V.; Ehlers, T.; Oel, M.; Behrens, B.-A.; Müller, P.; Hübner, S.; Althaus, P.; Bode, B.; Lachmayer, R. (2023): Do Additive Manufacturing Processes Enable More Sustainable Products? Circulation of Metallic Components Through Repair and Refurbishment by the Example of a Deep-Drawing Tool
DOI: 10.1007/978-3-031-27261-5_1
ISBN: 978-3-031-27261-5

Piwek, A.; Peddinghaus, J.; Uhe, J.; Brunotte, K. (2023): Influencing the mechanical properties of pre-joined hybrid semi-finished products by impact extrusion
DOI: 10.37904/metal.2023.4633
ISBN: 978-80-88365-12-9

Piwek, A.; Peddinghaus, J.; Uhe, J.; Brunotte, K.; Behrens, B.-A. (2023): Investigation of the joining zone formation of impact extruded hybrid components by varied forming sequence and partial cooling
DOI: 10.21741/9781644902479-64
ISBN: 978-1-64490-247-9

Schmiele, D.; Krimm, R.; Behrens, B.-A. (2023): Embossing Nanostructures,  Nanostructures, 11th Congress of the German Academic Association for Production Technology (WGP), Veröffentlicht in: Proceedings of the 11th Congress of the German Academic Association for Production Technology (WGP), S.307-313, Stuttgart, 02. Februar 2023
DOI: 10.1007/978-3-031-18318-8_32
ISBN: 978-3-031-18318-8

Siring, J.; Schlayer, M.; Wester, H.; Seifert, T.; Rosenbusch, D.; Behrens, B.-A. (2023): Simulation of Hot-Forging Processes with a Temperature−Dependent Viscoplasticity Model,  Lecture Notes in Production Engineering
DOI: 10.1007/978-3-031-18318-8_9

Stockburger, E.; Vogt, H.; Wester, H.; Hübner, S.; Behrens, B.-A. (2023): Evaluating material failure of AHSS using acoustic emission analysis,  Materials Research Proceedings
DOI: 10.21741/9781644902417-47

Stockburger, E.; Wester, H.; Behrens, B.-A. (2023): Optimised parametrisation of the MMC fracture model using AE and FE analysis
DOI: 10.1088/1757-899X/1284/1/012072

Stockburger, E.; Wester, H.; Jegatheeswaran, V.; Dykiert, M.; Behrens, B.-A. (2023): Improved failure characterisation of high-strength steel using a butterfly test rig with rotation control
DOI: 10.21741/9781644902479-80

Stockburger, E.; Wester, H.; Rosenbusch, D.; Behrens, B.-A. (2023): Finite element analysis of a combined collar drawing and thread forming process,  Production at the Leading Edge of Technology, WGP 2022, Lecture Notes in Production Engineering
DOI: 10.1007/978-3-031-18318-8_11
ISBN: 978-3-031-18318-8

Vasquez Ramirez, D.; Wester, H.; Rosenbusch, D.; Behrens, B.-A. (2023): Extension of the Modified Mohr-Coulomb fracture model by a strain rate and temperature dependence
DOI: 10.21741/9781644902479
ISBN: 978-1-64490-247-9

Weichenhain, J.; Wehmeyer, J.; Althaus, P.; Hübner, S.; Behrens B.-A. (2023): Investigation of the weld line of compression molded GMT and UD tape,  Production at the Leading Edge of Technology, Proceedings of the 12th Congress of the German Academic Association for Production Technology (WGP), University of Stuttgart, October 2022
DOI: 10.1007/978-3-031-18318-8

Wester, H.; Behrens, B.-A. (2023): Numerical Process Analysis of Forming Semi-Finished Hybrid Parts
DOI: 10.4028/p-p1hZbB

Wester, H.; Stockburger, E.; Peddinghaus, S.; Uhe, J.; Behrens, B.-A. (2023): Modelling failure of joining zones during forming of hybrid parts
DOI: 10.21741/9781644902479-78

B.-A. Behrens et al. (Eds.) (2022): Coating Materials Under Oxygen-Free Silane Atmosphere for Hot Stamping,  WGP 2021, LNPE, pp. 3–10.
DOI: 10.1007/978-3-030-78424-9_1

Behrens, B-A.; Brunotte, K.; Peddinghaus, Julius; Lorenz, U. (2022): INFLUENCE OF COOLING PARAMETERS ON THE SURFACE LAYER STRUCTURE OF HOT WORKING TOOLS,  18-19.05.2022 Brno, Czech Republic, EU
DOI: 10.37904/metal.2022.4391
ISBN: 978-80-88365-06-8

Behrens, B-A.; Brunotte, K.; Wester, H.; Peddinghaus, J.; Till, M. (2022): Functionalisation of the Boundary Layer by Deformation-Induced Martensite on Bearing Rings by means of Bulk Metal Forming Processes,  Orea Congress Hotel Brno, Czech Republic, EU,
DOI: 10.37904/metal.2022.4394

Behrens, B.-A.; Brunotte, K.; Peddinghaus, J.; Laeger, R. (2022): Influence of the connection between forming die and heatpipe on the heat transfer,  Brünn
DOI: 10.37904/metal.2022.4397
ISBN: 978-80-88365-06-8

Behrens, B.-A.; Brunotte, K.; Wester, H.; Kock, C.; Kildonaviciute, D. (2022): Determination of temperature dependence in Modified-Mohr-Coulomb failure model for process simulation of shear cutting,  International Deep-Drawing Research Group Conference (IDDRG 2022), Vol. 1238
DOI: https://doi.org/10.1088/1757-899X/1238/1/012028

Behrens, B.-A.; Rosenbusch, D.; Wester, H.; Althaus, P. (2022): Comparison of three different ductile damage models for deep drawing simulation of high-strength steels,  International Deep-Drawing Research Group Conference, Vol.1238
DOI: 10.1088/1757-899X/1238/1/012021

Holländer, U.; Peffer, C.; Albracht, L.; Möhwald, K.; Behrens, B.-A.; Maier, H.J.; (2022): Nickel-braze coated stainless steel sheets for th production of complex brazed assemblies
ISBN: 978-3-96144-183-9

Peddinghaus, J.; Brunotte, K.; Wester, H.; Till, M.; Kock, C.; Behrens, B.-A. (2022): Influence of the Microstructure on Flow Stress and Deformability of Iron-Aluminium Alloys,  18.-19. Mai 2022, Brno
DOI: 10.37904/metal.2022.4393
ISBN: 978-80-88365-06-8

Piwek, A.; Uhe, J.; Peddinghaus, J.; Ross, I.; Behrens, B.-A. (2022): Comparison of the joining zone development of hybrid semi-finished products after different extrusion processes,  Orea Conrgress Hotel Brno, Czech Republic, May 18-19, 2022
DOI: 10.37904/metal.2022.4398

Abdennadher, M.; Bouguecha, A.; Behrens, B.-A.; Stockburger, E.; Elleuch, R. (2022) (2021): Experimental Characterization of Coated Aluminum Sheets for Deep Drawing Applications, International Conference Design and Modeling of Mechanical Systems,  Design and Modeling of Mechanical Systems - V, S.842–850
DOI: https://doi.org/10.1007/978-3-031-14615-2_94

Behrens, B.-A., Duran, D., Uhe, J., & Matthias, T. (2021): Numerical investigations on the influence of the weld surface and die geometry on the resulting tensile stresses in the joining zone during an extrusion process,  ESAFORM 2021 [Online]; https://popups.uliege.be/esaform21/index.php?id=919

Behrens, B.-A., Heymann, A. (2021): Investigation on Temperature Control in the Sps Process with Titanium Aluminides,  Proceedings 30th Anniversary International Conference on Metallurgy and Materials, S.1089-1094.
DOI: 10.37904/metal.2021.4221

Behrens, B.-A., Uhe, J., Petersen, T., Demter, P. Büdenbender, C., Ross, I. (2021): JOINING ZONE EVALUATION OF HYBRID SEMI-FINISHED PRODUCTS AFTER BACKWARD CAN EXTRUSION,  30th Anniversary International Conference on Metallurgy and Materials, Brno, Czech Republic, EU, May 26 – 28, 2021, pp. 317-322
DOI: 10.37904/metal.2021.4106

Behrens, B.-A., Uhe, J., Petersen, T., Demter, P. Büdenbender, C., Ross, I. (2021): JOINING ZONE EVALUATION OF HYBRID SEMI-FINISHED PRODUCTS AFTER BACKWARD CAN EXTRUSION,  30th Anniversary International Conference on Metallurgy and Materials, Brno, Czech Republic, EU, May 26 – 28, 2021, pp. 317-322
DOI: 10.37904/metal.2021.4106

Behrens, B.-A., Uhe, J., Süer, F., Duran, D., Matthias, T., Ross, I. (2021): Fabrication of steel-aluminium parts by impact extrusion,  Materials Today: Proceedings

Behrens, B.-A.; Althaus P.; Hübner, S.; Rosenbusch, D.; Weichenhain, J.; Wester, H. (2021): Investigation of a Compression Molding Process for the Variant Flexible Production of a GMT Battery Shell,  Production at the Leading Edge of Technology, Proceedings of the 11th Congress of the German Academic Association for Production Technology (WGP), Dresden, September 2021
DOI: 10.1007/978-3-030-78424-9_3

Behrens, B.-A.; Brunotte, K.; Petersen, T.; Relge, R.; Till, M. (2021): Transfer of ausforming parameters to scaled forging tools,  30th Anniversary International Conference on Metallurgy and Materials, METAL 2021, Brno, Czech Republic
DOI: 10.37904/metal.2021.4118

Behrens, B.-A.; Hübner, S.; Holländer, U.; Langohr, A.; Pfeffer, C.; Albracht, L. (2021): Increasing the energy absorption of monolithic manganese boron steels in oxygen-free environment,  2021 IOP Conf. Ser.: Mater. Sci. Eng. 1157 012021.

Behrens, B.-A.; Krimm, R.; Koß, J.; Höber, A. (2021): A Versatile IoT-Approach to Process Data Acquisition.,  24th International Conference on Material Forming (ESAFORM 2021), Liège, Belgium, 14.-16.04.2021
DOI: 10.25518/esaform21.2043

Behrens, B.-A.; S. Hübner; H. Vogt; O. Golovko; S. Behrens; F. Nürnberger (2021): Influence of the quenching rate and natural ageing duration on the formability and mechanical properties of EN AW-7075,  13th International Conference on the Technology of Plasticity 25. – 30. Juli – Virtuelle Konferenz, Columbus, Ohio, USA

Behrens, B.-A.; Ursinus, J.; Büdenbender, C.; Brunotte, K.; Nürnberger, F.; Demler, E. et al. (2021): Computed tomography-based defect characterization and prediction of fatigue properties of extrudates from recycled field-assisted sintered EN AW-6082 aluminium chips,  Proceedings of the 8th Engineering Integrity Society International Conference on Durability and Fatigue (2021), S.170-182.

Behrens, B.-A.; Wester, H.; Petersen, T.; Uhe, J.; Büdenbender, C.; Peddinghaus, J.; Chugreeva; A. (2021): Numerical evaluation of forging process designs of a hybrid co-extruded demonstrator consisting of steel and aluminium.,  24th International Conference on Material Forming (ESAFORM)
DOI: 10.25518/esaform21.954

Bohr, D.; Petersen, T.; Brunotte, K.; Behrens, B.-A. (2021): Influence of Friction-Reducing Powder-Compaction Tool Coatings on Green-Compact Properties,  Production at the Leading Edge of Technology. WGP 2021. Lecture Notes in Production Engineering, pp. 349-356, Springer, Cham.
DOI: 10.1007/978-3-030-78424-9_39

Bohr, D.; Petersen, T.; Brunotte, K.; Behrens, B.-A. (2021): Investigation of Pressing and Ejection Performance of Friction-Reducing Powder-Compaction Tool Coatings,  Proceedings 30th Anniversary International Conference on Metallurgy and Materials, pp. 759-765.
DOI: 10.37904/metal.2021.4179

Höber, A.; Commichau, O.; Behrens, B.-A.; Krimm, R. (2021): Evaluation of an Electromagnetic Feeding Principle on Thin Metallic Foils.,  Proceedings of the 11th Congress of the German Academic Association for Production Technology (WGP)
DOI: 10.1007/978-3-030-78424-9_6

Schöler, S.; Heimes, N.; Konopka, D.; Behrens, B.-A.; Poll, G., Möhwald, K. (2021): Molybdenum based coatings on 100Cr6 bearing steel surfaces,  Tagungsband 4. Symposium Materialtechnik, Band 10, pp. 284 – 289.

B.-A. Behrens, S. Hübner, H. Vogt, O. Golovko, S. Behrens, F. Nürnberger (2020): Mechanical properties and formability of EN AW-7075 in cold forming processes,  39th International Deep Drawing Research Group Conference 26. – 30. Oktober 2020 – Virtuelle Konferenz, Busan, Korea

Behrens, B.-A.; Biermann, D.; Menzel, A.; Tillmann, W.; Krimm, R.; Meijer, A.; Schewe, M.; Stangier, D.; Commichau, O.; Müller, P.; Hübner, S.; Rosenbusch, D. (2020): Untersuchungen strukturierter Werkzeugflächen und der Einfluss auf den Werkzeugverschleiß,  Tagungsband des 4. Workshop Blechmassivumformung - Umformtechnische Herstellung von komplexen Funktionsbauteilen mit Nebenformelementen aus Feinblechen, Erlangen, 26.01.2020, FAU University Press, S.7-31
DOI: 10.25593/978-3-96147-280-2
ISBN: 978-3-96147-280-2

Behrens, B.-A.; Bohne, F.; Lorenz, R.; Arndt, H.; Hübner, S.; Micke-Camuz, M. (2020): Numerical and Experimental Investigation of GMT Compression Molding and Fiber Displacement of UD-Tape Inserts,  Procedia Manufacturing 47 (2020) 11–16. 23rd International Conference on Material Forming (ESAFORM 2020)
DOI: 10.1016/j.promfg.2020.04.109

Behrens, B.-A.; Brunotte, K.; Wester, H.; Stockburger, E.; (2020): Investigation of the Process Window for Deformation Induced Ferrite to Improve the Joinability of Press-Hardened Components,  29th International Conference on Metallurgy and Materials, Brno, Czech Republic, EU, May 20 - 22, 2020, Pages: 579-584.
DOI: 10.37904/metal.2020.3523

Behrens, B.-A.; Hübner, S.; Vogt, H.; Golovko, O; Behrens, S.; Nürnberger, F. (2020): Mechanical properties and formability of EN AW-7075 in cold forming processes

Behrens, B.-A.; Krimm, R.; Commichau, O. (2020): Analysis of Horizontal Loads in Sheet-Bulk Metal Forming and Their Consideration in Simulation,  Industrial Colloquium of the Transregional Collaborative Research Centre 73 TCRC73 2020: Sheet Bulk Metal Forming, pp 263-285

Behrens, B.-A.; Uhe, J.; Thürer, S. E.; Klose, C.; Heimes, N. (2020): Development of a Modified Tool System for Lateral Angular Co-Extrusion to Improve the Quality of Hybrid Profiles,  ESAFORM 2020. Procedia Manufacturing, Volume 47, 2020, Pages 224-230
DOI: 10.1016/j.promfg.2020.04.200

Behrens, B.-A.; Uhe, J.; Wester, H.; Stockburger, E.; (2020): Hot Forming Limit Curves for Numerical Press Hardening Simulation of AISI 420C,  29th International Conference on Metallurgy and Materials, Brno, Czech Republic, EU, May 20 - 22, 2020, Pages: 350-355.
DOI: 10.37904/metal.2020.3667

Behrens, B.-A.; Wester, H.; Matthias, T.; Hübner, S.; Wälder, J.; Müller, P. (2020): Investigation of the Influence of an Oscillation Superposition on the Wear Behaviour in an Industrial-like Process,  Procedia Manufacturing, Volume 47, 2020, pp. 315-320

Commichau, O.; Höber, A.; Behrens, B.-A.; Krimm, R.; (2020): Simulation of an Electromagnetic Foil Feeding Device,  Proceedings of the 10th Congress of the German Academic Association for Production Technology (WGP), Dresden, 23-24 September 2020
DOI: 10.1007/978-3-662-62138-7_9

Diefenbach, J.; Brunotte, K.; Behrens, B.-A. (2020): Microstructure and Mechanical Properties of Thermomechanically Forged Tempering Steel 42CrMo4,  Production at the leading edge of technology, Proceedings of the 10th Congress of the German Academic Association for Production Technology (WGP), Dresden, 23-24 September 2020
DOI: 10.1007/978-3-662-62138-7_15

Friesen, D.; Fries, S.; Krimm, R.; Brunotte, K.; Behrens, B.-A. (2020): Investigation on Noise Reduction during Cutting of High-Strength Materials based on Machine Acoustic Simulation,  Production at the leading edge of technology, Proceedings of the 10th Congress of the German Academic Association for Production Technology (WGP), Dresden, 23-24 September 2020

Heimes, N.; Uhe, J.; Thürer, S.E.; Wester, H.; Maier, H. J.; Klose, C.; Behrens, B.-A. (2020): Numerical Development of a Tooling System for the Co-Extrusion of Asymmetric Compound Profiles on a Laboratory Scale,  Production at the leading edge of technology. WGP 2020. Lecture Notes in Production Engineering. Springer, Berlin, Heidelberg. pp 66-75
DOI: 10.1007/978-3-662-62138-7_7

Müller, P.; Rosenbusch, D.; Missal, N.; Vogt, H.; Hübner, S.; Behrens, B.-A. (2020): Further Development of a Hydraulically Operated Oscillation Device for Application to an Industrial Forming Process,  Production at the leading edge of technology. Proceedings of the 10th Congress of the German Academic Association for Production Technology

Müller, P.; Rosenbusch, D.; Wehmeyer, J.; Hübner, S.; Behrens, B.-A. (2020): Investigations of forming force, friction values and surface qualities in ring compression tests using oscillating tools,  Production at the leading edge of technology, 2019, pp. 73-81

N. Heimes, F. Pape, D. Konopka, S. Schöler, K. Möhwald, G. Poll, B.-A. Behrens Heimes, N.; Pape, F.; Konopka, D.; Schöler, S.; Möhwald, K.; Poll, G.; Behrens, B.-A. (2020): Investigation of the Scaling of Friction Coefficients from the Nano to the Micro Level for Base Materials and Coatings,  Production at the leading edge of technology. WGP 2020. Lecture Notes in Production Engineering. Springer, Berlin, Heidelberg. pp 161-170
DOI: 10.1007/978-3-662-62138-7_17

Rosenbusch, D.; Müller, P.; Hübner, S.; Brunotte, K.; Behrens, B.-A. (2020): Investigation of a Superimposed Oscillation Compression Process for the Production of a Bulk Component,  Production at the leading edge of technology. Proceedings of the 10th Congress of the German Academic Association for Production Technology

Acar, S.; Gerstein, G.; Herbst, S.; Lorenz, U.; Malik, I. Y.; Behrens, B.-A (2019): Characterization of a modified hot-working steel with increased wear resistance,  The 11th TOOLING 2019 conference & exhibition

Acar, S.; Golovko, O.; Swider, M. A.; Nürnberger, F.; Siegmund, M.; Puppa, J.; Chugreev, A.; Behrens, B.-A. (2019): Influence of Increased Manganese Content on the Precipitation Behaviour of AISI H10 in Thermomechanical Fatigue Tests,  Proceedings of the 9th Congress of the German Academic Association for Production Technology (WGP), Hamburg, 30. September - 02. Oktober 2019
DOI: 10.1007/978-3-662-60417-5_19

Behrens, B.-A.; Amiri, A.; Duran, D.; Nothdurft, S.; Hermsdorf, J.; Kaierle, S.; Ohrdes, H.; Wallaschek, J.; Hassel, T. (2019): Improving the Mechanical Properties of Laser Beam Welded Hybrid Workpieces by Deformation Processing,  AIP Conference Proceedings 2113, 040025 , 02.Juli 2019
DOI: 10.1063/1.5112559

Behrens, B.-A.; Bohne, F.; Chugreev, A.; Schulze, H.; Wonnenberg, B.; Dröder, K. (2019): Numerical and Experimental Investigation of Thermoplastics in Multi-Axis Forming Processes,  2nd CIRP Conference on Composite Material Parts Manufacturing, Sheffield, UK, 10.- 11.Oktober 2019

Behrens, B.-A.; Bonhage, M.; Ursinus, J. (2019): Sinter-Forging of a Graded MMC Wear Component,  Conference Proceedings of the 28th International Conference on Metallurgy and Materials (METAL 2019), Brno, Czech Republic, 22.-24. Mai 2019 Weitere Informationen

Behrens, B.-A.; Brunotte, K.; Kuwert, P. (2019): Process Development for the Remanufacturing of Geared Components,  Proceedings of the 9th Congress of the German Academic Association for Production Technology (WGP), Hamburg, 30. September - 02. Oktober 2019
DOI: 10.1007/978-3-662-60417-5_5

Behrens, B.-A.; Chugreev, A. Wester, H. (2019): Experimental and numerical characterization method for forming behavior of thermoplastics reinforced with woven fabrics,  18th International Conference on Sheet Metal (SHEMET 2019), Leuven, Belgium, 15.-17. April 2019, Veröffentlicht in: Procedia Manufacturing, Vol. 29, S.443-449
DOI: 10.1016/j.promfg.2019.02.160

Behrens, B.-A.; Chugreev, A.; Bohne, F.; Lorenz, R. (2019): Approach for modelling the Taylor-Quinney coefficient of high steels strength,  18th International Conference on Sheet Metal (SHEMET 2019), Leuven, Belgium, 15.-17. April 2019, Veröffentlicht in: Procedia Manufacturing, Vol. 29, S.464-471
DOI: 10.1016/j.promfg.2019.02.163

Behrens, B.-A.; Chugreev, A.; Bonhage, M.; Büdenbender, C.; Zaitsev, A.; Malik, I. Y. (2019): Coupled thermomechanical numerical investigations of a hot forging die with an integrated cooling system,  Conference Proceedings of the 28th International Conference on Metallurgy and Materials (METAL 2019), Brno, Czech Republic, 22.-24. Mai 2019 Weitere Informationen

Behrens, B.-A.; Chugreev, A.; Dykiert, M. (2019): Stress-state dependent fracture characterisation and modelling of an AZ31 magnesium sheet alloy at elevated temperatures,  18th International Conference on Sheet Metal (SHEMET 2019), Leuven, Belgium, 15.-17. April 2019, Veröffentlicht in: Procedia Manufacturing, Vol. 29, S.450-457
DOI: 10.1016/j.promfg.2019.02.161

Behrens, B.-A.; Chugreev, A.; Hootak, M. (2019): Application of the Sehitoglu’s model for the calculation of tool life in thixoforging of steel parts,  AIP Conference Proceedings 2113, 040009, 02.Juli 2019
DOI: 10.1063/1.5112543

Behrens, B.-A.; Chugreev, A.; Jalanesh, M.; Wölki, K.; Bohne, F. (2019): Parametrisation of a numerical model for a partial heating strategy used to evaluate a masking concept of a hot stamping process,  Conference Proceedings of the 28th International Conference on Metallurgy and Materials (METAL 2019), Brno, Czech Republic, 22.-24. Mai 2019 Weitere Informationen

Behrens, B.-A.; Chugreev, A.; Lorenz, U.; Malik I. Y. (2019): Microstructure and wear behaviour of high alloyed hot-work tool steels 1.2343 and 1.2367 under thermo-mechanical loading,  Conference Proceedings of 2nd International Conference on Material Strength and Applied Mechanics (MSAM 2019), Kiev, Ukraine, 27.-30. Mai 2019

Behrens, B.-A.; Chugreev, A.; Selinski, M.; Matthias, T. (2019): Joining zone shape optimisation for hybrid components made of aluminium-steel by geometrically adapted joining surfaces in the friction welding process,  AIP Conference Proceedings 2113, 02.Juli 2019, 40027
DOI: 10.1063/1.5112561

Behrens, B.-A.; Klose, C.; Thürer, S. E.; Heimes, N.; Uhe, J. (2019): Numerical modeling of the development of intermetallic layers between aluminium and steel during co-extrusion,  AIP Conference Proceedings 2113, 040029

Behrens, B.-A.; Malik I. Y.; Ross, I. (2019): Investigation of a Sinterforging Process for radially particle reinforced sintered MMC-Components,  Conference Proceedings of the 28th International Conference on Metallurgy and Materials (METAL 2019), Brno, Czech Republic, 22.-24. Mai 2019 Weitere Informationen

Behrens, B.-A.; Puppa, J.; Acar, S.; Gerstein, G.; Nürnberger, F.; Lorenz, U. (2019): Development of an intelligent hot-working steel to increase the tool wear resistance,  The 11th TOOLING 2019 conference & exhibition

Behrens, B.-A.; Sokolinskaja, V.; Chugreeva, A.; Diefenbach, J.; Thürer, S.; Bohr, D. (2019): Investigation into the bond strength of the joining zone of compound forged hybrid aluminium-steel bearing bushing,  AIP Conference Proceedings 2113, 040028

Behrens, B.-A.; Uhe, J. (2019): Manufacturing of Hybrid Solid Components by Tailored Forming,  Proceedings of the 9th Congress of the German Academic Association for Production Technology (WGP), Hamburg, 30. September - 02. Oktober 2019, S.199-208
DOI: 10.1007/978-3-662-60417-5_20

Behrens, B.-A.; Volk, W.; Chugreev, A.; Till, M.; Maier, D.; Büdenbender, C. (2019): Numerical investigation of thermal and mechanical deviations in a hot forging process of 16MnCr5 and 42CrMo4 steel,  Conference Proceedings of the 28th International Conference on Metallurgy and Materials (METAL 2019), Brno, Czech Republic, 22.-24. Mai 2019 Weitere Informationen

Diefenbach, Julian; Matthias, Tim; Brunotte, Kai; Behrens, Bernd-Arno (2019): Forging of Extremely Finely Grained Microstructure Materials by Use of Thermomechanically Treated Base Material,  Proceedings of the 9th Congress of the German Academic Association for Production Technology (WGP), Hamburg, 30. September - 02. Oktober 2019, S.199-208.
DOI: 10.1007/978-3-662-60417-5_23

Fries, S.; Nguyen, T.; Altan, L.; Friesen, D.; Krimm, R.; Behrens, B.-A. (2019): Autoadaptive Minimization of Transfer System Oscillations,  Proceedings of the 9th Congress of the German Academic Association for Production Technology (WGP), Hamburg, 30. September - 02. Oktober 2019, S.121-129
DOI: 10.1007/978-3-662-60417-5_12

Heimes, N.; Pape, F.; Konopka, D.; Schöler, S.; Möhwald, K.; Poll, G.; Behrens, B.-A. (2019): Characterisation of Self-Regenerative Dry Lubricated Layers on Mo-Basis by Nano Mechanical Testing,  Proceedings of the 9th Congress of the German Academic Association for Production Technology (WGP), Hamburg, 30. September - 02. Oktober 2019, S.139-148
DOI: 10.1007/978-3-662-60417-5_14

Höber, A.; Behrens, B.-A.; Krimm R. (2019): Development of a Design Tool for Servo-Powertrains in Forming Presses,  Proceedings of the 9th Congress of the German Academic Association for Production Technology (WGP), Hamburg, 30. September - 02. Oktober 2019, S.93-101
DOI: https://doi.org/10.1007/978-3-662-60417-5_9

Konopka D.; Pape F.; Heimes N.; Matthias T.; Schöler S.; Möhwald K.; Behrens B.-A.; Poll G. (2019): Micro- and Nanotribological Characterization of Molybdenum Oxide Based Coatings on 100Cr6 Bearing Steel Surfaces,  The 10th International Conference BALTTRIB'2019, 2019 (11)
DOI: 10.15544/balttrib.2019.49

Müller P., Rosenbusch D., Wehmeyer J., Hübner S., Behrens B.-A. (2019): Investigations of forming force, friction values and surface qualities in ring compression tests using oscillating tools,  Proceedings of the 9th Congress of the German Academic Association for Production Technology (WGP), Hamburg, 30. September - 02. Oktober 2019, S.73-81
DOI: 10.1007/978-3-662-60417-5_7

Özkaya, F.; Yilkiran, D.; Schöler, S.; Hübner, S.; Möhwald, K.; Behrens B.-A. (2019): Dry sheet metal forming through selective oxidized tool surfaces,  TMS 2019, 148th Annual Meeting, 10.-14.03.2019, San Antonio, USA

Paschke, H.; Mejauschek, M.; Weber, M.; Brunotte, K.; Siegmund, M.; Peddinghaus, J.; Lenz, D.; Braeuer, G.; Behrens, B.-A.; Dueltgen, P. (2019): Life time enhancement of forging dies with tailored diffusion treatments,  Conference Proceedings of the 11th TOOLING Conference & Exhibition (TOOLING 2019), Aachen, 12.-16. Mai 2019

Paschke, H.; Mejauschek, M.; Weber, M.; Brunotte, K.; Siegmund, M.; Peddinghaus, J.; Lenz, D.; Braeuer, G.; Behrens, B.-A.; Dueltgen, P. (2019): 019 Life time enhancement of forging dies with tailored diffusion treatments,  Conference Proceedings of the 11th TOOLING Conference & Exhibition (TOOLING 2019), Aachen, 12.-16. Mai 2019

Stockburger, E.; Müller, F.; Chugreev, A.; Behrens, B.-A. (2019): Advanced FE-Simulation of press-hardening regarding joining ability and tool hardness estimation, Determination and validation of material parameters for sheet metal simulation,  Proceedings of the 12th Forming Technology Forum 2019, Herrsching, 19.-20. September 2019

Stockburger, E.; Wester, H.; Uhe, J.; Brunotte, K.; Behrens, B.-A. (2019): Investigation of the forming limit behavior of martensitic chromium steels for hot sheet metal forming,  Proceedings of the 9th Congress of the German Academic Association for Production Technology (WGP), Hamburg, 30. September - 02. Oktober 2019, S.159-168
DOI: 10.1007/978-3-662-60417-5_16

Ursinus, J.; Bonhage, M.; Büdenbender, C.; Nürnberger, F.; Demler, E.; Behrens, B.-A. (2019): Hot Forming of Cast Steel Cylinders,  Conference Proceedings of the 28th International Conference on Metallurgy and Materials (METAL 2019), Brno, Czech Republic, 22.-24. Mai 2019 Weitere Informationen

Behrens B.-A., Bonhage M., Chugreev A., Ross I., Malik I. Y (2018): Numerical Investigation of A Hot Forging Process For Partially Particle-Reinforced Sintered Components,  Conference Proceedings of the 27th International Conference on Metallurgy and Materials (METAL2018), 23-25 May, 2018, Brno, Czech Republic

Behrens, B.-A.; Bohr, D.; Brunotte, K. (2018): Powder Metallurgical Components with Radially Graded Material System by Segregation,  Hybrid Material and Structures, 18.-19. April 2018, Bremen, Deutschland.

Behrens, B.-A.; Brunotte, K.; Bohr, D. (2018): Optimised impregnation parameters of self-lubricating powder metallurgical components for cold bulk forming,  Conference Proceedings of the 27th International Conference on Metallurgy and Materials (METAL2018), 23-25 May, 2018, Brno, Czech Republic.

Behrens, B.-A.; Brunotte, K.; Lippold, L.; Petersen, T.; Siegmund, M.; Braeuer, G.; Landgraf, P.; Lampke, T.; Mejauschek, M.; Nienhaus, A.; Paschke, H.; Weber, M. (2018): Adapted diffusion processes for effective forging dies,  21st International ESAFORM Conference on Material Forming – ESAFORM 2018, Palermo, Italy, 23-25.04.2018, AIP Conference Proceedings

Behrens, B.-A.; Chugreeva, A.; Chugreev, A. (2018): FE-simulation of hot forging with an integrated heat treatment with the objective of residual stress prediction,  21st International ESAFORM Conference on Material Forming – ESAFORM 2018, Palermo, Italy, 23-25.04.2018, AIP Conference Proceedings, Vol. 1960-1, 040003
DOI: https://aip.scitation.org/doi/10.1063/1.5034857

Behrens, B.-A.; Goldstein, R., Chugreeva, A. (2018): Thermomechanical Processing for Creating Bi-Metal Bearing Bushings,  Thermal Processing in Motion 2018—Conference Proceedings of the Thermal Processing in Motion, June 5-7, 2018, Spartanburg, South Carolina, USA, pp. 15-21

Behrens, B.-A.; Goldstein, R.; Guisbert, D.; Duran, D. (2018): Thermomechanical Processing of Friction Welded Steel-Aluminum Billets to Improve Joining Zone Properties,  , 4th International Conference on Heat Treatment and Surface Engineering in Automotive Applications (Thermal Processing in Motion), 5.-7. Juni, Spartanburg, North Carolina, USA.

Behrens, B.-A.; Hübner, S.; Chugreev, A.; Bohne, F.; Seel, A.; Jalanesh, M.; Wölki, K. (2018): Investigation of masking concepts for influencing the austenitization process during press hardening,  17th International Conference on Metal Forming, 16-19 September 2018, Toyohashi, Japan

Behrens, B.-A.; Hübner, S.; Sunderkötter, C.; Gebel, L.; Gnaß, S.; Berndt, G.; Trimborn, C.; Pfeffer, C. (2018): Influence of process parameters on the hot stamping of carbon-martensitic chromium steel sheets,  IOP Conf. Series: Materials Science and Engineering 418 (2018) 012007

Behrens, B.-A.; Hübner, S.; Vogt, H. (2018): Formability of 7000 aluminum alloys in warm and hot forming condition,  37th Conference of the International Deep Drawing Research Group, 03.-07. Juni 2018.

Behrens, B.-A.; Kuwert, P.; Hootak, M. (2018): Numerical Process Design for Compound Forging of Powder – Metallurgical and Solid Dissimilar Workpieces,  Advances in Production Research, Proceedings of the 8th Congress of the German Academic Association for Production Technology (WGP), Aachen, November 19–20, 2018

Behrens, B.-A.; Yilkiran, D.; Schöler, S.; Özkaya, F.; Hübner, S.; Möhwald, K. (2018): Wear investigation of selective α-Fe2O3 oxide layers generated on surfaces for dry sheet metal forming,  17th International Conference on Metal Forming, 16-19 September 2018, Toyohashi, Japan

Commichau; O., Krimm, R.; Behrens, B.-A. (2018): Electromagnetic Feeding Device for Conductive Material ,  Advances in Production Research, Proceedings of the 8th Congress of the German Academic Association for Production Technology (WGP), Aachen, November 19–20, 2018
ISBN: 978-3-030-03450-4

Dean, A.; Rolfes, R.; Behrens, B.-A., Hübner, S.; Chugreev, A.; Grbic, N. (2018): Parametric Study of Hybrid Metal-Composites Clinching Joints,  ICTMP 2018 - 8th International Conference on Tribology in Manufacturing Processes & Joining by Plastic Deformation, 24.-26. June 2018, Elsinore, Dänmark

Koß, J.; Altan, L.; Krimm, R.; Behrens, B.-A. (2018): Energy Efficiency of Forming Machines,  Advances in Production Research, Proceedings of the 8th Congress of the German Academic Association for Production Technology (WGP), Aachen, November 19–20, 2018, S. 532- 540

Meyer, S.; Meschut, G.; Vogt, H.; Neumann, A.; Hübner, S.; Behrens, B.-A. (2018): Application of self-piercing nuts during hot forming,  71st IIW Annual Assembly & International Conference, 15.-20. Juli 2018.

Schöler, S.; Yilkiran, D.; Wulff, D.; Özkaya, F.; Möhwald, K.; Behrens, B.-A.; Maier, H.J. (2018): Selective oxidation of tool steel surfaces under a protective gas atmosphere using inductive heat treatment,  ICNFT 2018, 5th International Conference on New Forming Technology. Bremen 19.-21.09.2018

Wester, H.; Chugreev, A.; Moritz, J.; Behrens, B.-A. (2018): Experimental and Numerical Investigations on the Material Behaviour of Fibre-Reinforced Plastics and Steel for a Multi-material Compound Production,  Proceedings of the 8th Congress of the German Academic Association for Production Technology (WGP), Aachen, November 19-20, 2018
DOI: 10.1007/978-3-030-03451-1_22

Behrens, B.-A.; Goldstein, R.; Duran, D. (2017): Role of Thermal Processing in Tailored Forming Technology for Manufacturing Multi-Material Components,  Heat Treat 2017: Proceedings of the 29th ASM Heat Treating Society Conference, October 24-26, Columbus, Ohio, USA

Bouguecha, A.; Almohallami, A.; Behrens, B. A.; Lerch, M.; Windhagen, H. (2017): Influence of hip prosthesis size and its coating area on bone remodelling. A numerical investigation on a short stem uncemented hip implant,  ESBM2017, Sfax, Tunisien

Almohallami, A.; Bambach, M.; Behrens, B. A.; Bonk, C.; Rusch, M.; Sviridov, A. (2017): Process Optimization of Joining by Upset Bulging with Local Heating,  ESAFORM 2017, 26-28.04.2017, Dublin, Ireland

Behrens, B. A.; Maier, H. J.; Hübner, S.; Bonk, C.; Almohallami, A.; Lummer, C.; Schein, P.; Scheland, H.; Micke, M. (2017): Wear Behavior of MoS2 Lubricant Layers During Sheet Metal Forming,  Procedia Engineering, Volume 183, pages 357-362

Behrens, B.-A.; Bonk, C.; Hübner, S.; Rosenbusch, D.; Grbic, N.; Vucetic, M. (2017): Influence of the Determination of FLC’s and FLSC’s and Their Application for Deep Drawing Process with Additional Force Transmission,  Proceedings of 5th International Conference on Advanced Manufacturing Engineering and Technologies NEWTECH2017, 5-9 June 2017, Belgrade, Serbia
DOI: https://doi.org/10.1007/978-3-319-56430-2_30

Behrens, B.-A.; Bonk, C.; Hübner, S.; Uhe, J.; Klie, R.; Moritz, J. (2017): Local Heat Treatment in Draw Bending for Profiles of Manganese Boron Steel 22MnB5,  17th International Conference on Sheet Metal (SheMet 2017), 10.04.-12.04.2017, Palermo, Italien, In: Procedia Engineering
DOI: https://doi.org/10.1016/j.proeng.2017.04.007

Behrens, B.-A.; Bouguecha, A.; Bonk, C.; Chugreev, A. (2017): Numerical and experimental investigations of the anisotropic transformation strains during martensitic transformation in a low alloy Cr-Mo steel 42CrMo4,  International Conference on Technology of Plasticity (ICTP), 17.-22. September 2017, Cambridge, Großbritannien, Procedia Engineering, Vol. 207, pp. 1815-1820
DOI: 10.1016/j.proeng.2017.10.944

Behrens, B.-A.; Bouguecha, A.; Bonk, C.; Dykiert, M. (2017): Experimental Characterization and Material Modelling of an AZ31 Magnesium Sheet Alloy at Elevated Temperatures under Consideration of the Tension-Compression Asymmetry,  36th Conference of the International Deep Drawing Research Group, 02. - 06. Juli 2017, Munich, Germany

Behrens, B.-A.; Bouguecha, A.; Bonk, C.; Grbic, N.; Vucetic, M. (2017): Validation of the FEA of a Deep Drawing Process with Additional Force Transmission,  20th International Conference on Material Forming ESAFORM2017, AIP Conference Proceedings 1896, 080024 (2017), 26-28 April, Dublin, Ireland
DOI: https://doi.org/10.1063/1.5008104

Behrens, B.-A.; Bouguecha, A.; Bonk, C.; Matthias, T. (2017): Importance of material and friction characterisation for FE-aided process design of hybrid bevel gears,  Konferenz: 20th International ESAFORM Conference on Material Forming, Mini-Symposium ”Rolling and Forging“, 26th – 28th April 2017, Dublin City University, Ireland

Behrens, B.-A.; Bouguecha, A.; Bonk, C.; Schulze, H. (2017): Experimental Investigations and Numerical Modelling Approach Related to the Forming and Failure Behaviour of Symmetric Sheet Metal Thermoplastic Hybrid Structures,  36th Conference of the International Deep Drawing Research Group, 02. - 06. Juli 2017, Munich, Germany

Behrens, B.-A.; Bouguecha, A.; Frischkorn, C.; Huskic, A.; Chugreeva, A. (2017): Process Routes for Die Forging of Hybrid Bevel Gears and Bearing Bushings,  ESAFORM 2017, 26.-28.04.2017, Dublin, Ireland

Behrens, B.-A.; Hübner, S.; Bonk, C.; Bohne, F.; Micke-Camuz, M. (2017): Development of a Combined Process of Organic Sheet forming and GMT Compression Molding,  Procedia Engineering 207 (2017), pages 101-106

Behrens, B.-A.; Hübner, S.; Gaebel, C. M. (2017): Forming-induced Gloss Reduction of Coil Coated Sheets for White Goods,  17th International Conference on Sheet Metal (SheMet 2017), 10.04.-12.04.2017, Palermo, Italien, In: Procedia Engineering
DOI: 10.1016/j.proeng.2017.04.025

Behrens, B.-A.; Hübner, S.; Grbic, N.; Micke-Camuz, M.; Wehrhane, T.; Neumann, A. (2017): Forming and Joining of Carbon-Fiber-Reinforced Thermoplastics and Sheet Metal in One Step,  17th International Conference on Sheet Metal. Procedia Engineering, Volume 183, 2017, pages 227-232

Behrens, B.-A.; Kawalla, R.; Awiszus, B.; Bouguecha, A.; Ullmann, M.; Graf, M.; Bonk, C.; Chugreev, A.; Wester, H. (2017): Numerical Investigation of the Oxide Scale Deformation Behaviour with Consideration of Carbon Content during Hot Forging,  ICTP 2017, 17.-22. September 2017, Procedia Engineering Vol. 207, 2017, S. 526-531

Behrens, B.-A.; Krimm, R.; Nguyen, Q. T. (2017): Motorized measurement device for automatic registration of cutting edges,  59. Ilmenau Scientific Colloquium, 12. September 2017, ilmedia Verlag, Ilmenau

Behrens, B.-A.; Nürnberger, F.; Bonk, C.; Hübner, S.; Behrens, S.; Vogt, H. (2017): Influences on the formability and mechanical properties of 7000-aluminum alloys in hot and warm forming,  36th Conference of the International Deep Drawing Research Group, 02.-06. Juli 2017, München

Behrens, B.-A.; Raatz, A.; Hübner, S.; Bonk, C.; Bohne, F.; Bruns, C.; Micke-Camuz, M. (2017): Automated Stamp Forming of Continuous Fiber Reinforced Thermoplastics for Complex Shell Geometries,  Procedia CIRP 66 (2017), pages 113-118

Behrens, B.-A.; Thürer, S. E.; Uhe, J.; Golovko, O.; Bonk, C.; Bouguecha, A.; Klose, C.; Maier, H. J. (2017): Co-Extrusion of Semi-Finished Aluminum-Steel Compounds,  AIP Conference Proceedings 1896, 140002
DOI: http://dx.doi.org/10.1063/1.5008158

Bohne, F.; Micke-Camuz, M.; Weinmann, M.; Bonk, C.; Bouguecha, A.; Behrens, B.-A. (2017): Simulation of a Stamp Forming Process of an Organic Sheet and its Experimental Validation,  7.WGP-Jahreskongress, Aachen

Chugreeva, A.; Bouguecha, A.; Behrens, B.-A. (2017): Production Chain of Hot-Forged Hybrid Bevel Gears from Deposition-Welded Blanks,  7. WGP-Jahreskongress, 5.-6. Oktober 2017, Apprimus Verlag, Aachen, S. 21

Dean, A.; Rolfes, R.; Behrens, B.-A.; Bouguecha, A.; Hübner, S.; Bonk, C.; Grbic, N. (2017): Finite strain anisotropic elasto-plastic model for the simulation of the forming and testing of metal/short fiber reinforced polymer clinch joints at room temperature,  20th International Conference on Material Forming ESAFORM2017, AIP Conference Proceedings 1896, 030037 (2017), 26-28 April, Dublin, Ireland
DOI: https://doi.org/10.1063/1.5008024

Goldstein, R.; Behrens, B.-A.; Duran, D. (2017): Lightweighting by Tailored Forming: Bi-material Stepped Shaft,  Heat Treat 2017: Proceedings of the 29th ASM Heat Treating Society Conference, October 24-26, Columbus, Ohio, USA

Hilscher, S.; Krimm, R.; Behrens, B.-A. (2017): Tool Sided Approach for High Speed Shear Cutting on Conventional Path-Linked Presses ,  7. WGP-Jahreskongress, Apprimus Verlag, Aachen, S. 409-416

Korpala, G.; Ullmann, M.; Wester, H.; Bouguecha, A.; Awiszus, B.; Behrens, B.-A.; Kawalla, R. (2017): Modelling of Influence of Carbon Content on Material Behavior during Forging,  ESAFORM2017 26.-28. April 2017, AIP Conference Proceedings Vol. 1896 Issue 1, Published 10/2017

Vogt, H.; Bonk, C.; Hübner, S.; Behrens, B.-A. (2017): Warm and hot forming of 7000 aluminum alloys,  7. WGP-Jahreskongress: 05.-06. Oktober 2017 Aachen, Deutschland, Apprimus Verlag, S. 519-525

Weinstein, M.; Twiefel, J.; Wallaschek, J.; Behrens, B.-A.; Krimm, R.; Hasselbusch, T. (2017): Piezoelektrisches Tilgersystem zur semi-aktiven Reduktion von Stempelschwingungen einer Schnellläuferpresse,  VDI Mechatroniktagung, Dresden, 09. - 10.03.2017

Ahrens, M.; Hasselbusch, T.; Dagen, M.; Behrens, B.-A.; Ortmaier, T. (2016): Control of an Electromagnetically Actuated Resonance Punch,  Proceedings of the 3rd Symposium on Automated Systems and Technologies (AST 2016), Hanover (Germany), 12. – 13.10.2016

Almohallami, A.; Rusch, M.; Vucetic, M.; Bouguecha, A.; Bambach, M.; Behrens, B.-A. (2016): Joining by upset bulging at elevated temperatures,  WGP-Jahreskongress, Hamburg, 05-06 Spt. 2016

Behrens, B.-A.; Bohr, D.; Brunotte, K. (2016): Functionally graded MMC-materials by segregation,  Materials Science and Engineering 2016 (MSE), September 27th to 29th, 2016, Darmstadt, Germany

Behrens, B.-A.; Bonk, C.; Grbic, N.; Vucetic, M. (2016): Numerical analysis of a deep drawing process with additional force transmission for an extension of the process limits,  COMAT 2016 – 4th International Conference Recent Trends in Structural Materials , 09.-11. November 2016, Pilsen, Czech Republic

Behrens, B.-A.; Bouguecha, A.; Frischkorn, C.; Chugreeva, A.; Duran, D. (2016): Angepasste Erwärmungs- und Umformverfahren für hybride Massivbauteile,  23. Sächsischen Fachtagung Umformtechnik (SFU) 2016, 7.-8. Dezember 2016, Dresden, Deutschland

Behrens, B.-A.; Bouguecha, A.; Frischkorn, C.; Chugreeva, A.; Duran, D. (2016): Angepasste Erwärmungs- und Umformverfahren für hybride Massivbauteile,  23. Sächsischen Fachtagung Umformtechnik (SFU) 2016, 7.-8. Dezember 2016, Dresden, Deutschland

Behrens, B.-A.; Bouguecha, A.; Frischkorn, C.; Huskic, A.; Stakhieva A.; Duran, D. (2016): Tailored Forming Technology for Three Dimensional Components: Approaches to Heating and Forming,  5th International Conference on Thermomechanical Processing, 26.-28. Oktober 2016, Mailand, Italien

Behrens, B.-A.; Bouguecha, A.; Krimm, R.; Teichrib, S.; Nitschke, T. (2016): Energy-efficient Drive Concepts in Metal-forming Production,  Procedia CIRP, Volume 50, pp. 707-712, 26th CIRP Design Conference, Stockholm, 2016

Behrens, B.-A.; Bouguecha, A.; Vucetic, M.; Bonhage, M.; Zaitsev, A.; Malik I. Y. (2016): Compaction of a Copper Spiral within a Cylindrical Die of Steel Powder and Investigation of their Deformation Behaviour,  World PM2016 congress and exhibition, Proceedings, 9. -13. October 2016, Hamburg, Germany

Behrens, B.-A.; Bouguecha, A.; Vucetic, M.; Bonhage, M.; Zaitsev, A.; Malik, I.Y. (2016): Compaction Of A Copper Spiral Within A Cylindrical Die Of Steel Powder And Investigation Of Their Deformation Behavior,  Conference Proceedings of the World PM 2016 congress and exhibition, Hamburg, 09-13.10.2016

Behrens, B.-A.; Bouguecha, A.; Vucetic, M.; Chugreev, A. (2016): Advanced Tool Wear Simulation for Hot Precision Forging,  The 12th international Conference on Numerical Methods in Industrial Forming Processes NUMIFORM 2016, Mini-Symposium “Advanced modeling of contact and interfaces in forming processes”, 4-7 July 2016, Troyes, France

Behrens, B.-A.; Bouguecha, A.; Vucetic, M.; Chugreev, A.; Rosenbusch, D. (2016): Advanced Finite Element Analysis of Die Wear in Sheet-Bulk Metal Forming Processes,  19th annual Conference on Material Forming ESAFORM2016, Mini-Symposium “Rolling and Forging”, 27-29 April 2016, Nantes, France

Behrens, B.-A.; Bouguecha, A.; Vucetic, M.; Peshekhodov, I.; Matthias, T.; Kolbasnikov, N.; Sokolov, S.; Ganin, S. (2016): Experimental investigations on the state of the friction-welded joint zone in steel hybrid components after process-relevant thermo-mechanical,  19th annual Conference on Material Forming ESAFORM2016, Mini-Symposium “Rolling and Forging”, 27-29 April 2016, Nantes, France

Behrens, B.-A.; Bouguecha, A.; Vucetic, M.; Schulze, H. (2016): Finite element analysis regarding the forming behaviour of symmetric hybrid structures consisting of two sheet metal outer layers and a thermoplastic core,  4th International Conference Recent Trends in Structural Materials, November 9th - 11th 2016, Pilsen, Czech Republic

Behrens, B.-A.; Bouguecha, A.; Vucetic, M; Bonhage, M.; Malik, I. Y. (2016): Numerical investigation for the design of a hot forging die with integrated cooling channels,  Conference Proceedings of the 3rd International Conference on System-integrated Intelligence: New Challenges for Product and Production Engineering

Behrens, B.-A.; Lippold, L.; Kazhai, M. (2016): Ermittlung von Verschleißmechanismen an einem praxisnahen Schmiedegesenk,  6. WGP -Jahreskongress, Hamburg, 05.-06.09.2016

Bernd-Arno Behrens, André Spiekermeier, Sven Hübner, Masood Jalanesh, Kai Wölki, Klaus Dilger, Elisabeth Stammen and Gregor Wisner (2016): Investigations on adhesively bonded blanks for local reinforements of deep-drawn parts for body-in-white applications. ,  IDDRG - International Deep Drawing Research Group, 12.-15. Juni 2016, Linz, Österreich, pp. 225-233

D. Yilkiran, D. Wulff, A. Almohallami, U. Holländer, S. Hübner, K. Möhwald, B.-A. Behrens, H.J. Maier (2016): Selectively Oxidised Tool Steel Surfaces for Sheet Metal Forming,  Proceedings of the 12th International Conference THe „A“ Coatings 2016, 31.03.16 – 01.04.16, Hannover; Berichte aus dem IFW Band 3/2016

Golovko, O.; Puppa, J.; Nürnberger, F.; Rodman, D.; Maier, H. J.; Behrens, B.-A. (2016): Development of intelligent hot forging tools with increased wear resistance by cyclic edge-zone hardening,  10th TOOL Conference, Bratislava, October 4th to 7th, 2016

Hilscher, S.; Krimm, R.; Behrens, B.-A. (2016): A new approach to compensate oscillations of path-linked presses caused by inertial forces,  Production Engineering Vol. 1140 S 361-368

Peshekhodov, I.; Jiang, S.; Vucetic, M.; Bougecha, A.; Behrens, B.-A. (2016): Experimental-numerical evaluation of a new butterfly specimen for fracture characterisation of AHSS in a wide range of stress states,  Konferenz: Conference of the International Deep Drawing Research Group, 13.-15.06.16, Linz, Österreich Zeitschrift: Materials Science and Engineering 159 (2016)

Scheffler R., Koch S., Wrobel G., Pleßow M., Buse C. and Behrens B.-A. (2016): Modelling CAD Models - Method for the Model Driven Design of CAD Models for Deep Drawing Tools. In: Proceedings of the 4th International Conference on Model-Driven Engineering and Software Development, ISBN 978-989-758-168-7, pages 377-383. ,  Proceedings of the 4th International Conference on Model-Driven Engineering and Software Development,
DOI: 10.5220/0005799403770383
ISBN: 978-989-758-168-7

Scheffler R.; Murughan, V. P.; Wrobel, G.; Pleßow, M.; Koch, S.; Buse, C.; Behrens, B.-A. (2016): Graphical Modelling of a Meta-Model of CAD Models for Deep Drawing Tools,  INCOSE International Symposium, 26(2016)1, S 1090 – 1104
DOI: 10.1002/j.2334-5837.2016.00213.x

Ahrens, M.; Hasselbusch, T.; Dagen, M.; Behrens, B.-A.; Ortmaier, T. (2015): Development of a Miniaturized, Electromagnetically Actuated Punch,  Proceedings of the ASME 2015 International Mechanical Engineering Congress & Exposition (IMECE2015), Houston (USA), 13. – 19.11.2015

Almohallami A., Bouguecha A., Betancur Escobar S., Stukenborg-Colsmann C., Lerch ‎M., Nolte I., Behrens B.-A.‎ (2015): Numerische Abbildung der Migration einer Prothese aus UHMW-Polyethylen im ‎periprothetischen Becken,  9. Jahrestagung der Deutschen Gesellschaft für Biomechanik 06. - 08. Mai 2015 in Bonn

Behrens, B.-A.; Bouguecha, A.; Vucetic, M.; Hübner, S.; Rosenbusch, D.; Koch, S. (2015): Numerical and experimental investigations of multistage sheet-bulk metal forming process with compound press tools,  18th International ESAFORM Conference on Material Forming Ausgabe: Key Engineering Materials Vols 651-653 (2015), Seitenzahlen: 1153-1158, ISSN print: 1013-9826

Behrens, B.-A.; Brunotte, K. (2015): Partially load adapted wear resistant treatments of hot forging tools,  International Tribology Conference 2015, Tokyo, 16.-20.09.2015

Behrens, B.-A.; Brunotte, K.; Paschke, H.; Weber, M.; Brand, H. (2015): Wear resistant treatments by partial load adaptation in hot forging tools ,  Konferenzband zur International Tribology Conference 2015, Tokyo, 16.-20.09.2015

Behrens, B.-A.; Grbic, N.; Bouguecha, A.; Vucetic, M.; Neumann, A,; Osiecki, T. (2015): Validation of the FEA of a Sheet Metal Forming Process of Composite Material and Steel Foil in Sandwich Design,  WGP Kongress, 07.09.2015 – 08.09.2015, Applied Mechanics and Materials Vol. 794 (2015) pp 75-80

Behrens, B.-A.; Maier, H. J.; Nürnberger, F.; Schrödter, J.; Moritz, J.; Wolf, L.; Gaebel, C. M. (2015): Hot forming and subsequent cooling outside the press for adjusted tailored properties of 22MnB5 steel sheets,  5th International Conference on Hot Sheet Metal Forming of High-Performance Steel (CHS²), 31.05.-03.06.2015, Toronto, Kanada, S. 35-42

Behrens, B.-A.; Vucetic, M.; Hübner, S.; Koch, S.; Denkena, B.; Grove, T.; Lucas, H.; Tillmann, W.; Stangier, D.; Hausotte, T.; Loderer, A. (2015): Prozessauslegung und Untersuchung von geschliffenen und CrAlN / CrAlCN-beschichteten Werkzeugoberflächen mittels schwingungsüberlagertem Flachstauchversuch für die Blechmassivumformung,  Kolloquium: Tagungsband zum 18. Workshop Simulation in der Umformtechnik & 3. Industriekolloquium Blechmassivumformung 2015, Seitenzahlen: 173 - 192

Behrens, B.-A.; Vucetic, M.; Neumann, A.; Osiecki, T.; Grbic, N. (2015): Experimental test and FEA of a sheet metal forming process of composite material and steel foil in sandwich design using LS-DYNA,  18th International ESAFORM Conference on Material Forming, 15.04.2015 – 17.04.2015, Graz, Key Engineering Materials Vols. 651-653 (2015), pp 439-445

Bernd-Arno Behrens, Lennard Lippold, Hanno Paschke, Markus Baumer (2015): Efficiency increase of forging operations by tribological surface improving with structure enhancing hard particle layers ,  International Tribology Conference 2015, 16.-20.09.2015, Tokyo

Koch, S.; Vucetic, M.; Hübner, S.; Bouguecha, A.; Behrens, B.-A. (2015): Superimposed oscillating and non-oscillating ring compression tests for sheet-bulk metal forming technology. In: Advanced Materials Research, Vol. 794, (2015), Switzerland: Trans Tech Publications, (2015), S. 89–96,  Applied Mechanics and Materials Vol. 794 (2015), Seitenzahlen: 89-96

Nitschke, T.; Krimm, R.; Behrens, B.-A. (2015): Power-Split Press Drive for Economic Production,  5. WGP-Jahreskongress, Applied Mechanics and Materials Vol. 794 (2015), pp 435-441

Paschke, H.; Weber, M.; Baumer, M.; Brunotte, K.; Lippold, L.; Brand, H. (2015): Neue Ansätze zur Verschleißreduzierung bei Werkzeugen der Warmmassivumformung,  Werkstoffwoche Dresden, 14.-17.09.2015

Stefanie Betancur Escobar, Anas Bouguecha, Amer Almohallami, Henning Niemeier, Milan Vucetic, Maria Neumann, Karin Lucas, Ingo Nolte, Patrick Wefstaedt, Matthias Lehrch, Christina Stukenborg-Colsman, Bernd-Arno Behrens (2015): The Canin Hip Prosthesis: Migration Analysis and Development of a Standardized Prosthesis,  ICBT 2015, 28-30.10.2015

A. Müller, C. Heller, J. Köhler, M. Krämer, B. Welke, A. Almohallami, A. Bouguecha, B.-A. Behrens, ‎B. Denkena (2014): Wear simulation and wear testing of simplified ceramic knee implant ‎components,  BMT2014, 8-10, Oktobar, 2014, Walter de Gruyter

Almohallami A., Bouguecha A., Stukenborg-Colsman C., Lerch M., Nolte I., Behrens B.-A. (2014): Numerical wear simulation of artificial hip joint: tribological behaviour ‎of UHMWPE,  BMT2014, 8-10, Oktobar, 2014‎, Walter de Gruyter

Behrens, B.-A.; Bonhage, M.; Kammler, M.; Klassen, A.; Vahed, N. (2014): Development of a Powder Metallurgical Self Cooling Forging Die with Inner Cavities,  Conference Proceedings of the 2th International Conference on System-Integrated Intelligence: Challenges for Product and Production Engineering, Bremen, 2-4.07.2014

Behrens, B.-A.; Bouguecha, A.; Bouguecha, S.M.; Klassen, A.; Bonhage, M. (2014): Conception of a Hot Forging Die out of Metal Powder Equipped with Inner Cooling Channels,  Conference Proceedings of the Euro PM2014, Salzburg, 21.-24.9.2014

Behrens, B.-A.; Bouguecha, A.; Gaebel, C. M.; Moritz, J.; Schrödter, J. (2014): Hot Stamping of Load Adjusted Structural Parts,  11th International Conference on Technology of Plasticity (ICTP), 19.-24. Oktober 2014, Nagoya (Japan), pp. 1756–1761

Behrens, B.-A.; Bouguecha, A.; Vucetic, M.; Krimm, R.; Hasselbusch, T.; Bonk, C. (2014): Numerical and experimental determination of cut-edge after blanking of thin steel sheet of DP1000 within use of stress based damage model,  11th International Conference on Technology of Plasticity (ICTP), 19.-24. Oktober 2014, Nagoya (Japan), pp. 1096–1101

Behrens, B.-A.; Hübner, S.; Neumann, A. (2014): Forming sheets of metal and fibre-reinforced plastics to hybrid parts in one deep drawing process,  11th International Conference on Technology of Plasticity (ICTP), Nagoya (Japan), 19.-24. Oktober 2014, pp. 1608-1613

Behrens, B.-A.; Rolfes, R.; Vucetic, M.; Peshekhodov, I.; Reinoso, J.; Vogler, M.; Grbic, N. (2014): Material characterization for FEA of the clinching process of short fiber reinforced thermoplastics with an aluminum sheet,  6th International Conference on Tribology in Manufacturing Processes & Joining by Plastic Deformation, 23.06.2014 - 24.06.2014, Darmstadt, Advanced Materials Research, Vols. 966-967 (2014), pp 557-568

Behrens, B.-A.; Rolfes, R.; Vucetic, M.; Reinoso, J.; Vogler, M.; Grbic, N. (2014): Material modelling of short fiber reinforced thermoplastic for the FEA of a clinching test,  International Conference on Manufacture of Lightweight Components - ManuLight2014, 03.04.2014 - 04.04.2014, Dortmund, Procedia CIRP 18 (2014), pp 250-255

Behrens, B.-A.; Schrödter, J. (2014): Numerical Simulation of Phase Transformation During the Hot Stamping Process,  5th International Conference on Thermal Process Modeling and Computer Simulation, Orlando, USA, S. 179-190

Behrens, B.-A.; Vucetic, M.; Peshekhodov, I. (2014): Calibration of fracture initiation models for advanced high-strength sheet steels in a wide range of stress states using an uniaxial tensile testing machine,  International Deep Drawing Research Group Conference, S. 252 – 257, 1.-4. Juni 2014, Paris, Frankreich

Behrens, B.-A.; Yilkiran, T.; Braeuer, G.; Paschke, H.; Weber, M. (2014): Effizienzsteigerung von Schmiedeprozessen durch Oberflächen- und Randschichtmodifikationen,  Tagungsband zum 21. Umformtechnisches Kolloquium Hannover, 26-27.02.2014

Betancur Escobar S., Bouguecha A., Almohallami A., Wefstaedt P., Nolte I., Stukenborg-Colsman C., Behrens B.-A. (2014): Development and metal-forming of patient-individual acetabular ‎components of titanium sheets,  BMT2014, 8-10, Oktobar, 2014, Walter de Gruyter

Busch, C.; Hatscher, A.; Otto, M.; Huinink, S.; Vucetic, M.; Bonk, C.; Bouguecha, A.; Behrens, B.-A. (2014): Properties and application of high-manganese TWIP-steels in sheet metal forming,  Properties and application of high-manganese TWIP-steels in sheet metal forming, 11th International Conference on Technology of Plasticity (ICTP), 19.-24. Oktober 2014, Nagoya (Japan), pp. 939-944

Buse, C.; Santangelo, A.; Behrens, B. A. (2014): Anwendung der Schallemissionstechnik zur Prozessüberwachung in der Massivumformung,  Posterbeitrag zum 21. Umformtechnischen Kolloquium Hannover, 26-27.02.2014

Christian Busch, Ansgar Hatscher, Manuel Otto, Stefan Huinink, Milan Vucetic, Christian Bonk, Anas Bouguecha, Bernd-Arno Behrens (2014): Properties and application of high-manganese TWIP-steels in sheet metal forming,  11th International Conference on Technology of Plasticity (ICTP), 19.-24. Oktober 2014, Nagoya (Japan), pp. 939–944

Dannenberg, M.; Georgiadis, A.; Behrens, B.-A. (2014): Model Based Optimization of Forging Process Chains under the Consideration of Penalty Functions,  WGP Kongress 2014, 9./10. September 2014 in Erlangen, Advanced Materials Research, Vol. 1018, Trans Tech Publications, Switzerland, S. 533 - 538

Grittner, N.; Engelhardt, M.; Neumann, A.; Klose, C.; Hübner, S.; Behrens, B.-A.; Maier, H. J. (2014): A novel process for producing large scale Mg-sheets,  Magnesium Technology 2014, TMS (The Minerals, Metals & Materials Society), Wiley Published by John Wiley & Sons, Inc., Hoboken, New Jersey. Published simultaneously in Canada, (2014), S. 289-292

Gröne, M.; Salfeld, V.; Krimm, R. (2014): Design of an Electromagnetic System to Avoid Horizontal Ram Displacement,  Advanced Materials Research Vol. 1018 (2014), Trans Tech Publications, Switzerland, S. 237-244
DOI: 10.4028/www.scientific.net/AMR.1018.237
ISBN: 978-3-03835-245-7

Kosch, K.-G. (2014): Verbundschmieden hybrider Bauteile am Institut für Umformtechnik und Umformmaschinen,  Postersession - 21. Umformtechnisches Kolloquium Hannover, 26.-27.02.2014

Niemeier, H.; Jing, X.; Päuker, W.; Ludewig, T.; Schrödter, J.; Hübner, S.; Behrens, B.-A. (2014): Structure building in crash performing car components – International Conference „New Developments in Sheet Metal Forming“,  New Developments in Sheet Metal Forming – Neuere Entwicklungen in der Blechumformung, 13.-14.05.2014, Fellbach, Germany, pp. 309–318
ISBN: 978-3-88355-400-6

Nürnberger, F.; Diekamp, M.; Moritz, J.; Wolf, L.; Hübner, S.; Behrens, B.-A. (2014): Spray Cooling of Early Extracted Hot Stamped Parts, TMS (2014),  TMS (2014), in TMS 2014 Supplemental Proceedings, John Wiley & Sons, Inc., Hoboken, NJ, USA
DOI: 10.1002/9781118889879.ch116
ISBN: 9781118889879

Paschke, H.; Weber, M.; Behrens, B.-A.; Yilkiran, T. (2014): Ableitung geeigneter Verschleißschutzmaßnahmen bei Schmiedegesenken der WMU,  Postersession zum 21. Umformtechnisches Kolloquium Hannover, 26-27.02.2014

Paschke, H.; Weber, M.; Yilkiran, T. (2014): Selective Wear Protection of Forging Dies through Localized Plasma Duplex Treatments. In: Proceedings of the 40th International Conference on Metallurgical Coatings and Thin Films, ICMCTF 2014, San Diego, USA, April-Mai 2014. (CD) G5-1, Session 'Coatings, Pre-Treatment, Post-Treatment, and Duplex Technology'

Teichrib, S.; Krimm, R.; Behrens, B.-A. (2014): Contactless Sheet Metal Feeder for Metal-Forming Machines,  3rd International Conference on Mechanical Engineering and Mechatronics (ICMEM), S. 107-1 – 107-8, 14.-15. August, Prag, Tschechien

Amer Almohallami; Anas Bouguecha; Christina Stukenborg-Colsman; Matthias Lerch; Ingo Nolte; Bernd-Arno Behrens (2013): Comparison between simulation results and DEXA investigation of the bone remodelling after implanting a cementless long stem hip prosthesis,  De Gruyter Verlag

Behrens, B.-A.; Bouguecha, A.; Götze, T.; Moritz, J.; Sunderkötter, C.; Helmholz, R.; Schrödter, J. (2013): Numerical and experimental analysis of the phase transformation during hot stamping process in consideration of strain-dependent CCT-diagrams,  4th international conference hot sheet metal forming of high-performance steel CHS², Lulea, S. 329-336
ISBN: 978-3-942267-82-3

Behrens, B.-A.; Bouguecha, A.; Homann, B. (2013): Investigation of Surface Topography Evolution of Sheet Aluminum under Pressure and Tension,  Computational Plasticity XII – Fundamentals and Applications (COMPLAS 2013), pp. 1230-1237

Behrens, B.-A.; Bouguecha, A.; Huinink, T.; Peshekhodov, I.; Matthias, T.; Moritz, J.; Schrödter, J. (2013): Experimental and Numerical Analysis of the Flow Behaviour of Magnesium Wrought Alloy AZ31 for Deep Drawing Processes at Elevated Temperatures,  Computational Plasticity XII – Fundamentals and Applications (COMPLAS 2013)
ISBN: 978-84-941531-5-0

Behrens, B.-A.; Bouguecha, A.; Peshekhodov I.; Bonk C. (2013): Comparison between the Lemaitre and a Modified Lemaitre Damage Model on Sheet Steel Blanking IDDRG ,  IDDRG - International Deep Drawing Research Group, 02.-05.06.2013, Zurich, Switzerland, S. 201 - 206

Behrens, B.-A.; Dannenberg, M. (2013): Fast Simulation of a Flat Cross Wedge Rolling Process,  Proceedings of the COMPLAS 2013 – XII. International Conference on Computational Plasticity, Fundamentals and Applications, Barcelona, Spain, 03.-05. September 2013, pp. 1210 – 1221

Behrens, B.-A.; Hübner, S.; Bouguecha, A.; Grbic, N.; Vucetic, M. (2013): Comparison of Determination of Biaxial True Stress – True Strain Curves by the Use of Plane Strain Compression Test and Bulge Test,  The 9th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes NUMISHEET2014, AIP Conference Proceedings 1567, 650 (2013); 6-10 January 2014, Melbourne, Australia
DOI: https://doi.org/10.1063/1.4850056

Behrens, B.-A.; Hübner, S.; Götze, T.; Grbic, N. (2013): Clinchen eines kurzfaserverstärkten Thermoplasten mit einem Aluminiumblechwerkstoff,  Umformtechnik: Gestern - Heute - Morgen, 20. Sächsische Fachtagung Umformtechnik - SFU, 27.11.2013 - 28.11.2013, Dresden, (Tagungsband); pp 53-62

Behrens, B.-A.; Krimm, R.; Jocker, J.; Reithmeier, E.; Roth, B.; Rahlves, M. (2013): Method to Emboss Holograms into the Surface of Sheet Metals,  Key Engineering Materials, Vol. 549 (2013), Sheet Metal 2013, pp. 125-132, Proceedings of the Shemet Conference 2013, Belfast

Behrens, B.-A.; Krimm, R.; Nitschke, T. (2013): Economic Drive Concept for Flexible Forming Presses,  Key Engineering Materials Vol. 549 (2013) pp 255-261, "Sheet Metal 2013",Belfast/ Irland

Behrens, B.-A.; Yilkiran, T.; Braeuer, G.; Paschke, H.; Weber, M. (2013): Potential of Duplex Plasma Deposition Processes for the Improvement of Wear Resistance of Hot Forging Dies,  16th annual ESAFORM Conference on Material Forming, Mini-Symposium Forging and Rolling, 22-24 April 2013, Aveiro Portugal

Behrens, B.-A; Bach, F.-W.; Diekamp, M.; Hübner, S.; Nürnberger, F.; Schrödter, J.; Wolf, L.; Moritz, J. (2013): Process Time Reduction of Hot Stamping by Means of Early Extraction from the Press,  4th International Conference on Hot Sheet Metal Forming of High-Performance Steel, 9–12.06.2013 Luleå, Schweden, pp. 259-266

Behrens, B.-A; Bouguecha, A.; Götze, T.; Moritz, J.; Sunderkötter, C.; Helmholz, R.; Schrödter, J. (2013): Numerical and Experimental Analysis of the Phase Transformation during a Hot Stamping Process in Consideration of Strain-dependent CCT-Diagrams,  4th International Conference on Hot Sheet Metal Forming of High-Performance Steel, 9–12.06.2013 Luleå, Schweden, pp. 329-336

Gaebel, C. M. (2013): Formability of an anti-fingerprint coating considering the corrosion behavior of the stainless steel substrate,  WGP Congress 2013, 22./23. Juli 2013 in Erlangen, Advanced Materials Research Vol. 769, ISSN 1022-6680, pp 189-196 (Trans Tech Publications, Switzerland, doi:10.4028/www.scientific.net/AMR.769.189)

Liewald, M.; Hajyheydari, E.; Felde, A.; Fritsching, U.; Hinrichs, B.; Bucquet, T.; Fischer, M.; Dickert, H.; Bleck, W.; Behrens, B.-A.;Bouguecha, A.; Hadifi, T.; Huskic, A.; Kazhai, M.; Egorov, F.; Brinksmeier, E.; Maier, H.J.; Reimche, W.; Bruchwald, O.; Frackowiak, W. (2013): EcoForge – Resource-efficient process chains for high-performance components,  New Developments in Forging Technology, 2013, S.107-134

Niemeier, H.; Jing, X.; Päuker, W.; Ludewig, T.; Schrödter, J.; Hübner, S.; Behrens, B.-A. (2013): Implication of a new kind of structure building during deep drawing to minimize local imperfections in crash performing elements,  IDDRG - International Deep Drawing Research Group, 02.-05.06.2013, Zurich, Switzerland, S. 311 – 315

Behrens B.-A.; Schafstall, H.; Bouguecha, A.; Matthias, T. (2012): Numerical Investigations on the Flow Behavior of Steel in a Semi-solid State,  Proceedings of the 1st International Conference on Thermo-Mechanically Graded Materials, Kassel, 2012

Behrens, B.-A. (2012): New Developments in the FE Simulation of Closed Die Forging Processes, Proceedings of the 40th North American Manufacturing Research Institution of the Society of Manufacturing Engineers (NAMRC 40), Notre Dame, Indiana, USA,  NAMRC40-7772, pp. 1-10
ISBN: 978-0-87263-873-1

Behrens, B.-A., Vahed, N.; Kammler. M. (2012): Functional sintered parts with inherently stored information and integrated loading monitoring,  MS&T - Materials Science & Technology 2012 Conference & Exhibition, October 07 - 11, 2012, Pittsburgh, Pennsylvania

Behrens, B.-A., Vahed, N.; Kammler. M. (2012): Manufacturing of Functional Sintered Parts with Inherently Stored Information and Integrated Status Monitoring,  Euro PM2012 Congress, Basel, 16th - 19th September 2012

Behrens, B.-A.; Bouguecha, A.; Hadifi, T.; Klassen, A. (2012): Numerical and Experimental Investigations on the Service Life Estimation for Hot-Forging Dies,  The 15th International Esaform Conference on Material Forming, Key Engineering Materials Vols. 504-506, pp 163-168

Behrens, B.-A.; Bouguecha, A.; Kammler, M.; Klassen, A. (2012): “Investigations on die roughness of hot forming tools”, 9th International Tooling Conference, 11.-14.09.2012, Leoben, S.437-446, ISBN 978-3-9011384-52-3

Behrens, B.-A.; Bouguecha, A.; Kammler, M.; Schrödter, J.; Hadifi, T.; Götze, T. (2012): Assessment of a Modified Tensile Specimen Geometry for the Characterization of 22MnB5 with a Quenching and Deformation Dilatometer,  IDDRG - International Deep Drawing Research Group, 25.-29.11.2012, Mumbai, India, S. 214 - 220

Behrens, B.-A.; Huskic, A. (2012): Mechanical Properties of As-Cast Iron-Aluminium Alloys,  In: Seliger, G.; Kilic, E. (Edtrs.): Proceedings of the 10th Global Conference on Sustainable Manufacturing, Istanbul, Turkey, 31st October – 02nd November 2012, S. 133-137

Behrens, B.-A.; Kosch, K.-G. (2012): Challenges in Compound Forging of Steel-Aluminum Parts, EPD Congress 2012: The Minerals, Metals & Materials Society, 141th Annual Meeting & Exhibition (TMS 2012), 11.-15.03.2012, S. 169-176, Orlando, USA

Behrens, B.-A.; Vahed, N.; Kammler. M. (2012): Functionalisation of PM components by Integration of inherent Data Carriers and sensory Elements,  New Challenges for Product and Production Engineering; June 27th - 29th Hannover, Germany

Behrens, B.-A.; Voges-Schwieger, K.; Bouguecha, A.; Krimm, R.; Jocker, J.; Schrödter, J. (2012): An Innovative Material Load Sensor Based on Martensite Formation,  MetalForming 2012, Krakau (Polen) Seiten 1339-1342

Behrens, B.-A.; Voges-Schwieger, K.; Schrödter, J.; Jocker, J. (2012): Load Sensitive Control Arm based on Martensitic Phase Transformation,  Proceedings of the 1st Joint International Symposium on System-Integrated Intelligence 2012, S. 52-55

Behrens, B.-A.; Yilkiran, T.; Paschke, H.; Weber, M. (2012): Wear Reduction at Hot Forging Dies with Duplex Processes using Plasma Nitriding and Plasma Deposition Techniques,  In: Seliger, G.; Kilic, E. (Edtrs.): Proceedings of the 10th Global Conference on Sustainable Manufacturing, Istanbul, Turkey, 31st October – 02nd November 2012, S. 98-103

Behrens, B.A.; Bouguecha, A.; Schrödter, J.; Kettner, J.; Kammler, M.; Homann, B. (2012): Optimization of Sheet Metal Flow in Deep Drawing with an Adaptive-Elastic Blank Holder Based on Numerical and Experimental Investigations,  IDDRG - International Deep Drawing Research Group, 25.-29.11.2012, Mumbai, India, S. 354-360

Foydl, A.; Pfeiffer, I.; Kammler, M.; Pietzka, D.; Matthias, T.; Jäger, A.; Erman Tekkaya, A. ; Behrens, B.-A. (2012): Manufacturing of Steel-reinforced Aluminum Products by Combining Hot Extrusion and Closed-Die Forging,  The 15th International Esaform Conference on Material Forming, Key Engineering Materials Vols. 504-506 (2012) pp 481-486

Hilgenberg, K.; Huskic, A; Mienert, G.; Steinhoff, K. (2012): LASER-assisted net-shape forming of a miniature gear shaft with functionally graded properties,  In: Heim, H.-P.; Biermann, D.; Maier, H. M. (Edtrs.): Proceedings of the 1st International Conference on Thermo-Mechanically Graded Materials, Kassel (D): Verlag Wissenschaftliche Scripten, 2012, S. 121-126

Homann, B. (2012): Investigation of Surface Grains Evolution During Deep Drawing of Aluminum,  The Materials Science & Technology 2012 Conference and Exhibition proceedings, 07.-11.10.2012, Pittsburgh, Pennsylvania, ISBN-13: 978-0-87339-761-2, S. 1210-1216
ISBN: 978-0-87339-761-2

Paschke, H.; Weber, M.; Braeuer, G. Yilkiran, T.; Behrens, B.-A. (2012): Optimized Plasma Nitriding Processes for Efficient Wear Reduction of Forging Dies,  Proceedings of Advanced Metal Forming Processes in Automotive Industry, S.449-461 – The 3st International Lower Silesia Saxony Conference; 13-16 May 2012, Wroclaw, Poland

Pfeiffer, I.; Foydl, A.; Kammler, M.; Matthias, T.; Kosch, K.-G.; Jäger, A.; Khalifa, N. B.; Tekkaya, A. E.; Behrens, B.-A. (2012): Compound Forging of Hot-extruded Steel-reinforced Aluminum Parts,  Proceedings of the 14th International Conference on Metal Forming “Metal Forming 2012”, steel research international, 16.09.-19.09.2012, S. 159-162, ISBN: 978-3-514-00797-0, Krakow, Poland
ISBN: 978-3-514-00797-0

Yilkiran, T.; Behrens, B.-A.; Paschke, H.; Weber, M.; Braeuer, G. (2012): The Potential of Plasma Deposition Techniques in the Application Field of Forging,  Proceedings of Advanced Metal Forming Processes in Automotive Industry, S.449-461 – The 3st International Lower Silesia Saxony Conference; 13-16 May 2012, Wroclaw, Poland

Behrens, B.-A.; Bouguecha, A.; Cahyono, T.; Hübner, S.; Krimm, R.; Matthias, T.; Salfeld, V.; Voges-Schwieger, K.; Vucetic, M. (2011): Blechmassivumformung – ein neues Verfahren zur Herstellung komplexer Bauteile, Tagungsbeitrag 20. Umformtechnisches Kolloquium Hannover 2011 „Umformtechnik – Innovationen aus Industrie und Wissenschaft“. Herausgegeben von Prof. Dr.-Ing. Bernd-Arno Behrens, ISBN 978-3-00-033656-0, S. 161-172

Behrens, B.-A.; Bouguecha, A.; Götze, T. (2011): FE Simulation of a Coupled Injection Molding Sheet Metal Forming Process, Proc. 10th Int. Conf. Techn. Plast. (ICTP), S. 477-481, 2011

Behrens, B.-A.; Bouguecha, A.; Mielke, J.; Schafstall H. (2011): Innovative Reibmodellierung in der Warmmassivumformung. In: Umformtechnik - Innovationen aus Industrie und Wissenschaft, ISBN 978-3-00-033656-0, Hrsg. B.-A. Behrens, 20. Umformtechnisches Kolloquium, Hannover 2011, S. 199 - 211.

Behrens, B.-A.; Bouguecha, A.; Peshekodov, I.; Götze, T.; Huinink, T.; Vucetic, M.; Friebe, H.; Möller, T. (2011): Numerical Validation of Analytical Biaxial Trues Stress - True Strain Curves from Bulge Test. 8th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes (Numisheet 2011), Seoul, South Korea, pp. 107-114, ISBN: 978-0-7354-0944-6

Behrens, B.-A.; Bouguecha, A.; Vucetic, M.; Peshekhodov, I. (2011): Determination of the Johnson-Cook fracture model parameters for sheet metal based on the uniaxial tensile test, bulge test, and a modified Miyauchi shear test. International Conference on Technology of Plasticity (ICTP).pp. 945-950. Aachen, Germany. 2011.

Behrens, B.-A.; Bougueche, A.; Krimm, R.; Matthias, T.; Salfeld, V. (2011): "Characterization of Horizontal Loads in the Production of Asymmetrical Parts", Key Engineering Materials Vol. 473 "Sheet Metal 2011", pp 223-228, Leuven / Belgium

Behrens, B.-A.; Denkena, B.; Charlin, F.; Dannenberg, M. (2011): Model Based Optimization of Forging Process Chains by the Use of a Genetic Algorithm, 10th International Conference on Technology of Plasticity (ICTP) 2011, 25.-30. September 2011, pp. 154-158, ISBN 978-3-514-00784-0, Aachen (Germany)

Behrens, B.-A.; El-Galy, I.; Huinink, T.; Buse, C. (2011): Online Monitoring of Deep Drawing Process by Application of Acoustic Emission,  10th International Conference on Technology of Plasticity (ICTP) 2011, 25.-30. September 2011, steel research international (Special Edition), pp. 385-389, Aachen (Germany)
ISBN: 978-3-514-00784-0

Behrens, B.-A.; Hagen, T.; Knigge, J.; El-Galy, I.; Hadifi, T.; Bouguecha, A. (2011): New Trends in Forging Technologies, The 14th International Conference on Material Forming ESAFORM 2011. AIP Conference Proceedings, Vol. 1353, pp. 380-385, 2011 http://scitation.aip.org/getabs/servlet/GetabsServlet?prog=normal&id=APCPCS001353000001000380000001&idtype=cvips&gifs=yes&ref=no

Behrens, B.-A.; Hübner, S.; Krimm, R.; Wager, C.; Vucetic, M.; Cahyono, T. (2011): Development of a Hydraulic Actuator to Superimpose Oscillation in Metal-Forming Presses,  14th International Conference on Sheet Metal, 18.-20. April 2011, pp. 217-222, ISSN 1013- 9826, Katheholeike Universiteit Leuven (Belgium)

Behrens, B.-A.; Odening, D. (2011): Machinery Influence on the Production Accuracy of Precision-forged Parts. Metallurgical an Mining Industry / Plastic Deformation of Metals - IX International Scientific and Technical Conference September 21-23, 2011, Dnipropetrovsk, Ukraine. Ausgabe: No. 7, Vol. 3, 2011. S. 48-52 ISSN/ISBN: ISSN 2076-0507

Behrens, B.-A.; Vahed, N.; Gastan, E., Lange, F. (2011): Manufacturing Methods and Properties of Powder-Based Parts with Inherently Saved Information, Supplemental Proceedings: Vol. 3.: General Paper Selections: The Minerals, Metals & Materials Society, 140th Annual Meeting & Exhibition (TMS 2011), 27. February - 3. March 2011, pp. 211-218, San Diego, California (USA), February 2011

Behrens, B.-A.; Yilkiran, T.; Bistron, M. (2011): Increasing the wear resistance of hot forging tools by using thin ceramic layers and intelligent wear reducing steel alloys,  Proceedings of 20th International Forging Congress 2011, S.493-499, Hyderabad Indien, 13-17 November 2011

Behrens,B.-A.; Knigge, J (2011): Local Strain Hardening of Massive Forming Components by Means of Martensite Generation, Supplemental Proceedings: Vol. 3.: General Paper Selections: The Minerals, Metals & Materials Society, 140th Annual Meeting & Exhibition (TMS 2011), 27. February - 3. March 2011, pp. 317-324, San Diego, California (USA), February 2011

Betancur Escobar, S.; Bouguecha, A.; Nolte, I.; Stukenborg-Colsman, C.; Behrens B.-A. (2011): Influence of Prosthesis Migration in Human Hip Joint using Multi-Body Simulation ,  21. International Congress of Mechanical Engineering, 24.-28.10.2011, Natal, Brasilien

Böhm, V.; Bruchwald, O.; Reimche, W.; Bach, W.; Behrens, B.-A.; Odening, D. (2011): Acoustic Process Monitoring during Transient Precision Forging of High Strength Components. Metallurgical an Mining Industry / Plastic Deformation of Metals - IX International Scientific and Technical Conference September 21-23, 2011, Dnipropetrovsk, Ukraine. Ausgabe: No. 7, Vol. 3, 2011. S. 91-97 ISSN/ISBN: ISSN 2076-0507

Bouguecha, A.; Olle, P.; Hadifi, T.; Behrens, B.-A. (2011): Numerische Simulation zur Berechnung der Gefügeevolution und des Verzuges geschmiedeter Bauteile, Internationale Konferenz „Neuere Entwicklungen in der Massivumformung", 17. und 18. Mai 2011, Fellbach (bei Stuttgart)

Bouguecha, A.; Weigel, N.; Behrens, B.-A.; Stukenborg-Colsman, C.; Waizy, H. (2011): Finite element simulation of bone remodeling after total ankle replacement,  European Conference of the International Federation for Medical and Biological Engineering, September 14-18 2011, Budapest, Hungary

Bouguecha, A.; Weigel, N.; Betancur Escobar, S.; Nolte, I.; Wefstaedt, P.; Stukenborg-Colsman, C.; Behrens, B.-A. (2011): Influence of assumed boundary conditions derived from MBS on numerically simulated strain-adaptive bone remodeling in the pelvis after total hip replacement,  European Conference of the International Federation for Medical and Biological Engineering, September 14-18 2011, Budapest, Hungary

Denkena, B., Stiffel, J.-H., Behrens, B.-A., Huskic, A. (2011): Influence of iron-aluminides grain size adjusted by forging and heat treatment on machining,  Proceedings FeAl 2011 Discussion Meeting on the Development of Innovative Iron Aluminium Alloys, Lanzarote (Canary Islands), 5-7 October 2011

El-Galy, I.; Behrens, B.- A. (2011): Online Monitoring of Hot Die Forging Processes Using Acoustic Emission (Part-II), Proceedings of 29th European Conference on Acoustic Emission Testing, Vienna, 8-11 September 2010

Kammler, M.; Hadifi, T.; Nowak, M.; Bouguecha, A. (2011): Experimental and Numerical Investigations on Metal Flow during Direct Extrusion of EN AW-6082,  International Conference on Extrusion and Benchmark, 03-05 October 2011, Bologna, Italy

Medricky, M.; Klawitter, G.; Struck, R.; Behrens, B.-A.; Vucetic, M.; (2011): "Optimizing of Cooling Simulation in Press Hardening". 8th International Conference and Workshop on Numerical Simulation of 3rd Sheet Metal Forming Processes (Numisheet 2011), pp. 970-977, ISBN: 978-0-7354-0944-6

Merklein, M.; Behrens, B.-A.; Plettke, R.; Krimm, R.; Opel, S.; Schneier, T.; Matthias, T.; Salfeld, V. (2011): „Integrierte Fertigung tiefgezogener Blechbauteile mit Verzahnungselementen unter Einsatz prozessangepasster Halbzeuge“, 1. Workshop Blechmassivumformung, pp.159-180, ISBN 978-3-87525-321-4

Reithmeier, E., Weckenmann, A., Behrens, B.-A., Ohrt, C., Kästner, M.; Akkasoglu, G.; Cahyono, T.; Hübner, S.; Krimm, R.; Salfeld, V.; Voges-Schwieger, K.; Vucetic, M. (2011): „Qualitätsorientierte Entwicklung der Blechmassivumformung“, 1. Workshop Blechmassivumformung, pp. 97-118, Erlangen
ISBN: 978-3-87525-321-4

Salfeld, V.; Krimm, R.; Matthias, T.; Behrens, B.-A. (2011): “Investigation on the Process-Machine Interaction by Forming Parts with Sheet-Bulk Metal Forming”, International Conference on Manufacturing Systems – ICMAS, Bucharest, 10-11 November 2011

Voges-Schwieger, K. (2011): Cryogenic sheet metal forming for an advanced material behavior, 21st International congress of mechanical engineering,  Proceedings of the COBEM - 21st International Congress of Mechanical Engineering, 24.-28. October in Natal, Brazil

Voges-Schwieger, K.; Hübner, S.; Behrens, B.-A. (2011): Local Reinforcements as Adjustments Reducing Imperfections,  21st International congress of mechanical engineering, Proceedings of the COBEM - 21st International Congress of Mechanical Engineering, 24.-28. October in Natal, Brazil.

Weckenmann, A.; Behrens, B.-A.; Reithmeier, E.; Akkasoglu, G.; Vucetic, M.; Ohrt, C.; Cahyono, T.; Hübner, S.; Kästner, M.; (2011): Appliance of the Maturity Method in the Development of Endoscopic Geometry Inspection for Sheet-Bulk Metal Forming Tools" 6th International Working Conference "Total Quality Management - Advanced and Intelligent Approaches", With Second Special Conference Manufuture in Serbia 2011

Behrens, B.-A.; Bouguecha, A.; Czora, M.; Krimm, R.; Matthias, T.; Salfeld, V. (2010): Consideration of Machine Properties in FE Analysis of Sheet Metal Forming Processes; Proceedings, 2nd International Conference on Process Machine Interactions, Vancouver, Canada, June 10-11, 2010, University of British Columbia, ISBN: 978-0-9866331-02

Behrens, B.-A.; Bouguecha, A.; Hadifi, T.; Mielke, J. (2010): Numerical and experimental investigation of an improved friction model for hot forging processes, Proceedings International Conference on Innovative Technologies 2010 (IN-TECH 2010), 14.-16. September 2010, pp. 462-464, ISBN 978-80-904502-2-6, Prague (Czech Republic), September 2010

Behrens, B.-A.; Bouguecha, A.; Raedt, H. W.; Hadifi, T. (2010): Numerical investigations on the fatigue failure of forging tools due to thermo-mechanical cyclic loading, The 13th International ESAFORM Conference on Material Forming, Breschia / Italy, 07.04.-09.04.2010

Behrens, B.-A.; Bouguecha, A.; Schäfer, F.; Hadifi, T. (2010): Numerische Untersuchungen zum Ermüdungsversagen von Schmiedewerkzeugen infolge thermisch-mechanischer Wechselbelastung, 25. Aachener Stahlkolloquium Umformtechnik, 11.-12. März 2010, Aachen

Behrens, B.-A.; Bouguecha, A.; Schäfer, F.; Hadifi, T. (2010): FEA Based Tool Life Quantity Estimation of Hot Forging Dies Under Cyclic Thermo-Mechanical Loads, International Conference on Advances in Materials and Processing Technologies (AMPT 2010), 24.-27. Oktober 2010, Paris

Behrens, B.-A.; Demir, M.; Weber, M. (2010): Praxistaugliche Prosessschmierung für das Presshärten. im 7. Forum Tribologische Entwicklungen in der Blechumformung; S. 147-164; 11.11.2010

Behrens, B.-A.; Eckold, C.-P.; Hübner, S.; Groche, P.; Ertugrul, M. (2010): Investigation of segmented hydro-elastic blank holder for deep drawing, iddrg Conference Proceedings, 50th Anniversary Conference, Tools and technologies for the processing of ultra high strength steel, 2010 May 31 – June 02, Seiten 281-288, ISBN 978-3-85125-108-1, Graz (Österreich), Mai 2010

Behrens, B.-A.; Hübner, S.; Eckold, C.-P.; Groche, P.; Ertugrul, M. (2010): Development of a segmented hydro-elastic blank holder for deep drawing, In: Eric Felder, Pierre Montmitonnet (Editors): Tribology of Manufacturing Processes Volume 2, Proceedings of the 4th International Conference on Tribology in Manufacturing Processes (ICTMP 2010), Nice, France, June 13th – 15th, 2010, Seiten 683-689, ISBN 978-2-911256-28-8, Paris (Frankreich), 2010

Behrens, B.-A.; Hübner, S.; Süße, D.; Ulbricht, V.; Rosenberger, J. (2010): Cost-Efficient Draw Bending of Load-Adapted Profiles, International Conference on Innovative Technologies IN-TECH 2010, 14.09.-16.09.2010, Prague, Czech Republic.

Behrens, B.-A.; Hübner, S.; Vucetic, M. (2010): Integration of an Active Forming Die in a Modular Tool System for Sheet-Bulk Metal Forming, Proceedings of the IDDRG 50th Anniversary Conference "Tools and Technologies for the Processing of Ultra High Strength Steels", 31. May - 02. June in Graz, Austria, DOI 10.3217/978-3-85125-108-1-010

Behrens, B.-A.; Hübner, S.; Vucetic, M. (2010): Design of a Modular Tool System for the Sheet-Bulk Metal Forming Process, International Conference on Innovative Technologies IN-TECH 2010, 14.09.-16.09.2010, Prague, Czech Republic.

Behrens, B.-A.; Krimm, R.; Hübner, S.; Cahyono, T. (2010): Flow Analysis of a Rotary Piston Valve with CFX Mesh Motion Techniques, Proceeding, International Conference on Innovative Technologies IN-TECH, 14-16.09.2010, Prag, ISBN: 978-80-904502-2-6

Behrens, B.-A.; Lüken, I.; Odening, D. (2010): Cooling and Lubrication of Automated Forging Processes with High-Pressure Systems,Proceedings of The 13th International ESAFORM Conference on Material Forming, University of Brescia, Italy, April 07-09, 2010

Behrens, B.-A.; Odening, D. (2010): Material Influence on Shrinkage Behaviour of Precision-Forged Parts, Metalforming 2010, September 19-22, 2010, Toyohashi, Japan.

Behrens, B.-A.; Olle, P.; Gershteyn, G.; Voges-Schwieger, K. (2010): Experimental and Numerical Investigations on Microstructural Evolution during a Hot Stamping Process, Proceedings of the IDDRG 50th Anniversary Conference "Tools and Technologies for the Processing of Ultra High Strength Steels", 31. May - 02. June in Graz, Austria, DOI 10.3217/978-3-85125-108-1-010, pp. 81-90

Behrens, B.-A.; Vahed, N.; Gastan, E.; Eckold, C.-P.; Lange, F. (2010): Flexible local data storage for PM components, Proceedings International Conference on Innovative Technologies 2010 (IN-TECH 2010), 14.-16. September 2010, pp. 117-120, ISBN 978-80-904502-2-6, Prague (Czech Republic), September 2010

Behrens, B.-A.; Vahed, N.; Gastan, E.; Lange, F. (2010): Manufacturing Method of PM Components with Integrated Information Storage, Proceedings 2010 International Conference on Frontiers of Manufacturing and Design Science (ICFMD 2010), 11.-12. December 2010, Chongqing (China), published in Applied Mechanics and Materials, vol. 44-47, pp. 915-919, ISSN 1660-9366, 1662-7482, December 2010 (online)

Behrens, B.-A.; Wager, C.; Krimm, R.; Kammler, M.; Schrödter, J. (2010): Investigation of the elastic deformation of a mechanical press due to cutting high-strength steels, Proceedings International Conference on Innovative Technologies 2010 (IN-TECH 2010), 14.-16. September 2010, pp. 425-428, ISBN 978-80-904502-2-6, Prague (Czech Republic), September 2010

Bistron, M.; Behrens, B.-A.; Paschke, H. (2010): Reduction of Wear by Boron Based Multilayer Coatings on Forging Dies, Proceedings Metal Forming 2010, 13th International Conference, 19.-22. September 2010, steel research international, vol. 81, no. 9, pp. 290-293, ISBN 978-3-514-00754-3, Verlag Stahleisen, Toyohashi (Japan), September 2010

Bouguecha, A.; El-Galy, I.; Stukenborg-Colsman, C.; Lerch, M.; Nolte, I.; Wefstaedt, P.; Mathias, T.; Behrens, B.-A. (2010): Numerical Investigations of the Strain-Adaptive Bone Remodeling in the Prosthetic Pelvis, IFMBE Proceedings 29, pp. 562, Chalkidiki, Greece, 27 - 30 May 2010

Eckold, C.-P.; Behrens, B.-A.; Hübner, S.; Lange, F.; Groche, P.; Ertugrul, M. (2010): Development of a Blank Holder with Hydro-Elastic Segments for Deep Drawing, Proceedings Metal Forming 2010, 13th International Conference, 19.-22. September 2010, steel research international, vol. 81, no. 9, pp. 612-615, ISBN 978-3-514-00754-3, Verlag Stahleisen, Toyohashi (Japan), September 2010

El Nadi,T.; Behrens, B.-A.; Krimm, R. (2010): Simulation of levelling with adjustable roll bending, Proceedings Metal Forming 2010, 13th International Conference, 19.-22. September 2010, steel research international, vol. 81, no. 9, pp. 238-241, ISBN 978-3-514-00754-1, Verlag Stahleisen, Toyohashi (Japan), September 2010.

Rosenberger, J.; Süße, D.; Hübner, S.; Ulbricht, V.; Behrens, B.-A. (2010): Draw bending of load-adapted sheet metal profiles, 9th Asia-Pacific Conference on Material Processing, Sydney, Australia, 7.-10.06. 2010; Key Engineering Materials Vol. 443, 06/2010, S.152-157, Trans Tech Publications, Switzerland

Voges-Schwieger, K.; Hübner, S.; Behrens, B.-A. (2010): Additional forming elements for a local reinforcement in deep drawn parts, Proceedings of The 13th International ESAFORM Conference on Material Forming, University of Brescia, Italy, April 07-09, 2010

Altpeter, I.; Kopp, M.; Kröning, M.; Sklarczyk, C.; Behrens, B.-A.; Hübner, S.; Voges-Schwieger, K. (2009): Zerstörungsfreie Charakterisierung von Spannungszuständen in Blechen beim Tiefziehen mittels elektromagnetischer Prüfverfahren, Deutsche Gesellschaft für zerstörungsfreie Prüfverfahren, DGZfP-Jahrestagung 08. - 20. Mai 2009 in Münster, online @ http://jahrestagung.dgzfp.de/Programm/Session.aspx?id=MI.4.C

Bach, Fr.-W.; Möhwald, K.; Deißer, T. A.; Behrens, B.-A.; Bistron, M. (2009): Verschleißminderung durch den Einsatz dünner borhaltiger Schichten auf Matrizen für das Schmieden von Schrägverzahnten Zahnrädern. Verbundwerkstoffe und Werkstoffverbunde - Tagungsband zum 12. Werkstofftechnischen Kolloquium, WTK Chemnitz, S. 390 - 396, 2009

Behrens, B.-A.; Alasti, M.; Bouguecha, A.; Hadifi, T.; Mielke, J.; Schäfer, F. (2009): Numerical and experimental investigations on the extension of friction and heat transfer models for an improved simulation of hot forging processes, 12th ESAFORM 2009, Enschede / The Netherlands, 27.04.-29.04.2009

Behrens, B.-A.; Helms, G.; Stolorz, M.; Wefstaedt, P.; Nolte, I. (2009): Ermittlung der Belastungen im gesunden und prothetisch versorgten caninen Hüftgelenk mit Hilfe eines Mehrkörpersimulationsmodells, 6. Jahrestagung der Deutschen Gesellschaft für Biomechanik (DGfB), 14.-16.05.2009, Münster

Behrens, B.-A.; Helms, G.; Stolorz, M.; Windhagen, H.; Wefstaedt, P.; Nolte, I. (2009): Determination of Hip-Joint Forces by means of Multi-body Simulation, 11th International Congress of the IUPESM, 07.-12.09.2009, München

Behrens, B.-A.; Kettner, J.; Hübner, S. (2009): Zero Lubrication Forming of Pre-coated Sheet Metals, Proceedings of the 17th IFHTSE Congress 2008, October 27 - 30 in Kobe, Japan, Netsu Shori, Journal of the Japan Society for Heat Treatment, 2009, Vol. 49, Special Issue, Vol. 1, p. 213-216, ISSN 0288-0490

Behrens, B.-A.; Lange, F.; Gastan, E. (2009): Production of PM components with integrated information, Proceedings 4th I*PROMS 2008 Virtual International Conference on Innovative Production Machines and Systems, 1.-14. July 2008, pp. 481-486, ISBN 978-1904445-81-4, Cardiff (United Kingdom), April 2009

Behrens, B.-A.; Odening, D. (2009): Process and Tool Design for Precision Forging of Geared Components. The 12th International ESAFORM Conference on Material Forming, University of Twente, The Netherlands, April 27-29, 2009 - springer.com

Behrens, B.-A.; Rosenberger, J.; Süße, D.; Ulbricht, V. (2009): Cost-Efficient Fabrication of Load-Adapted Profiles by Draw Bending. The 12th International ESAFORM Conference on Material Forming, University of Twente, The Netherlands, April 27.-29., 2009 - springer.com

Behrens, B.-A.; Weilandt, K. (2009): Mathematical Description of a’-Martensite Formation and its Application for the Detection of Damage in Sheet Metal, Materials Science & Technology 2009 (MST), Pittsburgh

Behrens,B.-A.; Conrads, H.; Petrov, P. (2009): Effect of temperature and strain rate on friction factor during microforming of AW-6082 Al-Alloy, the 12th International ESAFORM Conference on Material Forming, University of Twente, Netherlands, April 27-29 2009 - springer.com

Elgaly, I.; Pfeiffer, I.; Behrens, B.-A. (2009): Application of Acoustic Emission to Monitor Forging Processes of Magnesium Alloys under Superimposed Hydrostatic Pressure, Material Science and Technology 2009 (MS&T09), 23-29 Oct. 2009, Pittsburg, Pennsylvania, USA

Hagen, T.; Behrens, B.-A.; Mielke, J. (2009): Cold forming with locally induced strain hardening of aluminium wrought alloys under superimposed hydrostatic pressure; Proceedings of the 15th International Symposium on Plasticity "Macro- to Nano-scale Inelastic Behavior of Materials: Plasticity, Fatigue and Fracture", 03.-08.01.2009 in St. Thomas, U.S. Virgin Islands, pp. 106-108

Rosenberger, J.; Behrens, B.-A.; Hübner, S.; Süße, D.; Ulbricht, V. (2009): Flexible Draw Bending of Profiles; Proceedings of the 13th International Conference on Sheet Metal 2009, 6-8 April 2009 in Birmingham, United Kingdom, edited by B. Shirvani, R. Clarke, J. Duflou, M. Merklein, F. Micari, J. Griffith, ttp trans tech publications, ISBN 0-87849-336-0, ISBN-13 987-0-87849-336-4, pp. 565-570

Voges-Schwieger, K.; Behrens, B.-A.; Hübner, S. (2009): Enhancing Deep Drawing Processes by Using a Thermomechanical Tool Design, Proceedings of the 13th International Conference on Sheet Metal 2009, 6-8 April 2009 in Birmingham, United Kingdom, edited by B. Shirvani, R. Clarke, J. Duflou, M. Merklein, F. Micari, J. Griffith, ttp trans tech publications, ISBN 0-87849-336-0, ISBN-13 987-0-87849-336-4, pp. 595-600.

Voges-Schwieger, K.; Behrens, B.-A.; Hübner, S. (2009): Material characterization of local strain-induced alpha'-martensitic reinforcements, Proceedings of The 12th International ESAFORM Conference on Material Forming, University of Twente, The Netherlands, April 27 - 29, 2009 - springer.com

Behrens, B.-A. (2008): Finite element analysis of die wear in hot forging processes, CIRP General Assembly, 24.-30.08.2008, CIRP Annals - Manufacturing Technology, Volume 57, Issue 1, 2008, Pages 305-308, ISSN: 0007-8506

Behrens, B.-A.; Bach, Fr.-W.; Möhwald, K.; Deißer, T.A.; Schäfer, F. (2008): Finite Element Analysis of Stresses in Active Brazed Ceramic-Metal Hot Forging Dies. Proceedings of the 12th International Conference on Metal Forming - Metal Forming 2008, 21.-24.09.2008, Volume 1, pp. 563-569, ISBN 978-514-00754-3

Behrens, B.-A.; Bouguecha, A. (2008): Femorale Belastungsabschirmung nach einer Hüftarthroplastik, 57. Jahrestagung der Norddeutschen Orthopädenvereinigung, 12. -14.06.2008, Hamburg

Behrens, B.-A.; Bouguecha, A.; Hundertmark, A.; Marthiens, O.; Schäfer, F.; Voges-Schwieger, K.; Weilandt, K. (2008): Aktuelle Forschungsergebnisse am Institut für Umformtechnik und Umformmaschinen, Umformtechnik- Ein Wirtschaftszweig mit Potential, ISBN 978-3-00-023874-1, Hrsg. B.-A. Behrens, 19. Umformtechnisches Kolloquium, Hannover 2008, S. 47-70

Behrens, B.-A.; Gastan, E.; Lange, F. (2008): Metal-Forming Production of Innovative Components from Metal Powders, MNM 2008- Metallic and Nonmetallic Materials - production-properties-application, 7th Scientific/Research Symposium, 22.-23. May 2008, Zenica, pp. 358-367, Zenica (Bosnien-Herzegowina), May 2008

Behrens, B.-A.; Hagen, T.; Mielke, J.; Sidhu, K. B. (2008): Production of structure components with selective properties by means of action media based cold forming; ESAFORM 2008, Lyon/Frankreich, 23.04.-25.04.2008

Behrens, B.-A.; Hübner, S.; Demir, M. (2008): Conductive Heating System for Hot Sheet Metal Forming; The 1st INTERNATIONAL CONFERENCE on Hot Sheet Metal Forming of High-Performance Steel, Kassel, 22. - 24.10.2008

Behrens, B.-A.; Hübner, S.; Eckold, C.-P.; Schnapp, J. D. (2008): Reducing Damage of Coating Caused by Clinching of Aluminum Sheet Metal by Process Optimization; 9th International Conference on Technology of Plasticity (ICTP) 2008, 07.-11. September 2008, pp. 1304-1309, ISBN 978-89-5708-152-5, Gyeongju (Korea), September 2008

Behrens, B.-A.; Hübner, S.; Voges-Schwieger, K. (2008): Local martensite evolution in metastable austenitic steels - new material for a changing world, Proceedings of the IDDRG "Best in Class Stamping", 16.-18. June 2008 in Olofström, Schweden, pp. 231-237

Behrens, B.-A.; Hübner, S.; Weilandt, K.; Voges-Schwieger, K. (2008): Local martensitic high-strength structure fields - material properties of metastable austenitic steel, Proceedings of the 6th European Stainless Steel Conference Science and Market, 10.-13. June 2008 in Helsinki, Finland, pp. 799-804

Behrens, B.-A.; Kettner, J.; Hübner, S. (2008): Zero Lubrication Forming of Pre-coated Sheet Metals, Program & Abstracts Proceedings of the 17th IFHTSE Congress 2008, October 27 - 30 in Kobe, Japan, p. 143

Behrens, B.-A.; Lange, F.; Helms, G. (2008): Virtual intelligent forging - Teaching forging excellence, Proceedings Metal Forming 2008, 12th International Conference, 21.-24. September 2008, steel research international, Verlag Stahleisen, pp. 486-492, ISBN 978-3-514-00754-3, Krakau (Poland), September 2008

Behrens, B.-A.; Matthias, T.; Czora, M.; Poelmeyer, J.; Ahrens, M. (2008):