2018
Behrens BA, Klose C, Chugreev A, Heimes N, Thürer SE, Uhe J. A Numerical Study on Co-Extrusion to Produce Coaxial Aluminum-Steel Compounds with Longitudinal Weld Seams. Metals. 2018 Sep;8(9):717. Epub 2018 Sep 13. doi: 10.3390/met8090717, 10.15488/4221
Behrens BA, Chugreev A, Hootak M. A Sectionwise Defined Model for the Material Description of 100Cr6 in the Thixotropic State. in Buffa G, Fratini L, Ingarao G, Di Lorenzo R, Hrsg., Proceedings of the 21st International ESAFORM Conference on Material Forming, ESAFORM 2018. American Institute of Physics Inc. 2018. 040006. (AIP Conference Proceedings). doi: 10.1063/1.5034860
Behrens BA, Chugreev A, Matthias T. Characterisation of the Joining Zone of Serially Arranged Hybrid Semi-Finished Components. in Buffa G, Fratini L, Ingarao G, Di Lorenzo R, Hrsg., Proceedings of the 21st International ESAFORM Conference on Material Forming, ESAFORM 2018. American Institute of Physics Inc. 2018. 040002. (AIP Conference Proceedings). doi: 10.1063/1.5034856
Behrens BA, Brunotte K, Bohr D. Ecological lubrication in cold forming of sintered powder metallurgical components. Dry Metal Forming Open Access Journal (DMFOAJ). 2018 Mär 15;4 - 2018:68-73.
Behrens BA, Brunotte K, Bohr D. Experimental Investigation of Endogenous Lubrication during Cold Upsetting of Sintered Powder Metallurgical Components. in Bay N, Nielsen CV, Hrsg., Tribology in Manufacturing Processes and Joining by Plastic Deformation II. Trans Tech Publications Ltd. 2018. S. 163-170. (Key Engineering Materials). doi: 10.4028/www.scientific.net/kem.767.163
Behrens BA, Chugreev A, Kock C. Experimental-numerical approach to efficient TTT-generation for simulation of phase transformations in thermomechanical forming processes. in Proceedings of 5th International Conference Recent Trends in Structural Materials. 2018. (IOP Conference Series: Materials Science and Engineering). Epub 2018 Dez 10. doi: 10.1088/1757-899X/461/1/012040, 10.15488/5345
Behrens BA, Chugreeva A, Chugreev A. FE-Simulation of Hot Forging with an Integrated Heat Treatment with the Objective of Residual Stress Prediction. in Buffa G, Fratini L, Ingarao G, Di Lorenzo R, Hrsg., Proceedings of the 21st International ESAFORM Conference on Material Forming, ESAFORM 2018. American Institute of Physics Inc. 2018. 040003. (AIP Conference Proceedings). doi: 10.1063/1.5034857
Behrens BA, Chugreev A, Moritz J, Bohne F, Schulze H. Finite element analysis for sheet metal reinforced hybrid structures produced via non-kinematical constraint manufacturing processes. in ECCM 2018 - 18th European Conference on Composite Materials. 2018
Behrens BA, Hübner S, Vogt H. Formability of 7000 aluminum alloys in warm and hot forming condition. in Proceedings of International Deep Drawing Research Group 37th Annual Conference. 2018. (IOP Conference Series: Materials Science and Engineering). Epub 2018 Sep 21. doi: 10.1088/1757-899X/418/1/012027, 10.15488/4257
Behrens BA, Hübner S, Neumann A, Vogt H, Meschut G, Meyer S. Funktionsintegration in der Warmblechumformung: Einbringen von Funktionselementen während des Formhärtens. WT Werkstattstechnik. 2018;108(10):674-678. doi: 10.37544/1436-4980-2018-10-38
Behrens BA, Chugreev A, Matthias T. Hybride Lagerbuchsen aus Aluminium und Stahl: Numerische Prozessauslegung zur Herstellung einer hybriden Lagerbuchse durch Tailored Forming. WT Werkstattstechnik. 2018;108(10):691-697. doi: 10.37544/1436-4980-2018-10-55
Behrens BA, Diaz-Infante D, Altan T, Yilkiran D, Wölki K, Hübner S. Improving Hole Expansion Ratio by Parameter Adjustment in Abrasive Water Jet Operations for DP800. SAE International Journal of Materials and Manufacturing. 2018 Sep 17;11(3):241-252. doi: 10.4271/05-11-03-0023
Behrens BA, Hübner S, Sunderkötter C, Gebel L, Gnaß S, Berndt G et al. Influence of process parameters on the hot stamping of carbon-martensitic chromium steel sheets. in Proceedings of International Deep Drawing Research Group 37th Annual Conference. 2018. (IOP Conference Series: Materials Science and Engineering). Epub 2018 Sep 21. doi: 10.1088/1757-899X/418/1/012007, 10.15488/4256
Behrens BA, Lippold L. Influence of shot peened surfaces on friction in hot forging. Surface Topography: Metrology and Properties. 2018 Nov 2;6(4):045005. doi: 10.1088/2051-672x/aae91c
Behrens BA, Stonis M, Rasche N. Influence of the forming angle in cross wedge rolling on the multi-directional forging of crankshafts. International Journal of Material Forming. 2018 Jan;11(1):31-41. Epub 2016 Nov 19. doi: 10.1007/s12289-016-1326-3
Behrens BA, Stonis M, Blohm T, Richter J. Investigating the effects of cross wedge rolling preforming operation and die forging with flash brakes on forging titanium hip implants. International Journal of Material Forming. 2018 Jan;11(1):67-76. Epub 2016 Nov 10. doi: 10.1007/s12289-016-1329-0
Behrens BA, Hübner S, Chugreev A, Bohne F, Seel A, Jalanesh M et al. Investigation of masking concepts for influencing the austenitization process during press hardening. Procedia Manufacturing. 2018;15:1095-1102. Epub 2018 Aug 11. doi: 10.1016/j.promfg.2018.07.382, 10.15488/5187
Behrens BA, Chugreev A, Matthias T, Nothdurft S, Hermsdorf J, Kaierle S et al. Investigation of the composite strength of hybrid steel-steel semi-finished products manufactured by laser beam welding and friction welding. IOP Conference Series: Materials Science and Engineering. 2018;461(1):012049. Epub 2018 Dez 10. doi: 10.1088/1757-899X/461/1/012049, 10.15488/4618
Behrens BA, Bohr D. Manufacturing of functionally graded metal matrix composite materials by segregation. International Journal of Materials Research. 2018 Mai 15;109(5):373-380. Epub 2018 Apr 28. doi: 10.3139/146.111619
Behrens BA, Bonhage M, Chugreev A, Ross I, Malik IY. Numerical investigation of a hot forging process for partially particle-reinforced sintered components. in METAL 2018 - 27th International Conference on Metallurgy and Materials, Conference Proceedings. TANGER Ltd. 2018. S. 330-335
