Wear test stand
![](https://www.ifum.uni-hannover.de/fileadmin/_processed_/a/d/csm_Verschleisspruefmaschine_2604_3965c34ba1.jpg)
![](https://www.ifum.uni-hannover.de/fileadmin/_processed_/a/d/csm_Verschleisspruefmaschine_2604_e42f4f7120.jpg)
![](https://www.ifum.uni-hannover.de/fileadmin/_processed_/a/d/csm_Verschleisspruefmaschine_2604_f3656d6c06.jpg)
The wear test stand (VPS) at the IFUM can be used to experimentally simulate the wear on the die radii of forming tools. For this purpose, a slit strip is cyclically drawn over the quarter-circle circumference of a test specimen. The quarter circle circumference represents the drawing radius of a tool. The wear behaviour can thus be recorded and documented via the number of strokes.
Parameter | Range |
---|---|
Tractive force | 0 – 21.600 N |
Stroke path | 0 – 100 mm |
Number of cycles | 0 – 31 1/min |
max. relative speed | 160 mm/s |
Contact
![](/typo3temp/assets/_processed_/4/e/csm_24503bf21b234a197a21ffd0f718e3c1688ef383-fp-3-2-0-0_c1b289b5fc.jpg)
![](/typo3temp/assets/_processed_/4/e/csm_24503bf21b234a197a21ffd0f718e3c1688ef383-fp-3-2-0-0_f882f0fb08.jpg)
Dr.-Ing. Sven Hübner
Division Manager
Phone
Address
An der Universität 2
30823 Garbsen
30823 Garbsen
![](/typo3temp/assets/_processed_/4/e/csm_24503bf21b234a197a21ffd0f718e3c1688ef383-fp-3-2-0-0_c1b289b5fc.jpg)
![](/typo3temp/assets/_processed_/4/e/csm_24503bf21b234a197a21ffd0f718e3c1688ef383-fp-3-2-0-0_f882f0fb08.jpg)
Dr.-Ing. Sven Hübner
Division Manager
Phone
Address
An der Universität 2
30823 Garbsen
30823 Garbsen